Earticle

In generally, the estimation work regarding building mechanical service system in comparison with other architectural estimations is time-consuming, and the process is continuously getting more difficult because of the increased usage of the attached piping materials such as fittings and supports in addition to their complicated construction processes. In order to improve this problem, the Korean authority provides a simple method to estimate the attached material rate regarding the main piping material, which is the most time-consuming work in the architectural mechanical estimation. However, to be an applicable method on construction site, a proper conversion rate of the attached piping material is still required for the proposed method regarding building usage and working types. Therefore, the purpose of this research is the suggestion of the material and labor cost rate of the attached piping materials such as the fittings and supports by work types and fitting methods of indoor fire, sprinkler, and extinguishing gas piping work of mechanical fire protection facilities in office buildings that have been designed after 2010.

The purpose of this research was influenced by the historical background of Japanese modern architecture by the circulation of Kuma Kengo's architectural works and he wanted to look at the values and directions he was pursuing and how they were expressed in his works. The results of the review are summarized as follows. First, metabolism was developed as a reaction of modernism in modern architecture, focusing on growth through infinite reproduction by looking at architecture and cities as organisms and by using unit space as cells. Kuma Kengo, on the other hand, argues that focusing on the possibility of decimation of unit members by sequencing the elements that make up the space smaller than the unit space is closer to an ecological architecture. Second, what Kuma Kengo says is "erase the architecture" that is naturally related to the environment and disappears when its use is exhausted. His argument is expressed in individual architectural works through 'visual erase', 'particle painting of materials' and 'independence through dependency.' Through this, Kuma Kengo's ecological architectural languages were influenced by the ecological causes of metabolism, but they differed from the perspective of seeing architectural circulation as an organism. If metabolism was intended to realize circulation with growth potential based on the module of unit space, Kuma Kengo sought to implement circulation with the extinction of the unit members of space.

The purpose of this study is to suggest 100MPa class ultra high strength concrete mix design model applying neural network theory, in order to minimize an effort wasted by trials and errors method until now. Mix design model was applied to each of the 70 data using binary binder, ternary binder and quaternary binder. Then being repeatedly applied to back-propagation algorithm in neural network model, optimized connection weight was gained. The completed mix design model was proved, by analyzing and comparing to value predicted from mix design model and value measured from actual compressive strength test. According to the results of this study, more accurate value could be gained through the mix design model, if error rate decreases with the test condition and environment. Also if content of water and binder, slump flow, and air content of concrete apply to mix design model, more accurate and resonable mix design could be gained.

According to the data released by Korea Occupational Safety & Health Agency, construction workers suffering from falling disaster have been increasing continuously for the last five years, and in fact, small and medium construction companies’ falling disaster forms over 97% of all every year. This means that to reduce falling disaster significantly, it is needed to get rid of disaster taking place in small and medium construction companies. Here, this study aims to analyze various causes of falling disaster in small and medium construction companies, examine how those factors are correlated with one another, and suggest how to manage the risk of falling disaster effectively. According to the study results, main factors influencing falling disaster in small and medium construction companies are found as follows: Situational Awareness/Risk Perception, Fatigue/Alertness, Communications, Equipment/Facilities, and Personal Protective Equipment (PPE) in the Direct Level, Management/Supervision, Education/Training, and Planning in the Organizational Level, and Management's Commitment to Safety in the Policy Level.

The coastal village in Woljeong-ri, Jeju is highly preferred by tourists because of its unique natural landscape different from inland areas. Especially, the number of buildings in the coastal area of the village is increasing due to escalating commercial value. Buildings are densely developed, along the seaside, resulting in privatization of coastal landscape. This results in blocking of landscape and psychological exchanges between the coastal village and coast. This study analyzed the actual conditions of coastal landscape before and after 2010, when the number of tourists and demand for development were increased in the coastal area of the coastal village in Woljeong-ri, Jeju. In this study, open index, visible horizontal index, elevation angle, elevation blockage and visible facade index were used to compute objective indicators of coastal landscape status. The analysis reveals visible facade index, a complex landscape assessment indicator, was increased by 7 times after 2010 as compared with before 2010. As such, there are many coastal villages in Jeju similar to Woljeong-ri that have a high landscape value and are in need of management. A comprehensive measure including a system for management of coastal landscape is urgently required to create narrative landscape in Jeju.

The context of innovation in which we evolve today, subtracts us in a spacial reality and virtuality (digital) that aimed less and less to interact with natural processes which could converge to new possible relationships in the world. We constantly live in presence of fluctuations and imperceptible natural energies (wind, solar radiation, etc.) defined by flows, their own physicality, which remains without being virtual, elusive. This study first outlines how these energies already exploited within the framework of production, could be thought as interactive of our habitat’s space dimension, as a prolongation of a physical and material environment built by men and for men, giving rise to new social, cultural dynamics, and making natural complexity of our space vivid, comprehensible with new visual and physical clues. In recent days, where lifestyles are changing, architecture no longer needs to limit its scope of creation to only built structures. Based on a deeper understanding of human and through new potential advanced technologies (kinetic system, etc), it is time to fundamentally diagnose what environments or devices contribute to our lives. Architecture becomes «interface», step up its fundamental role, and newly defines the sturdy image and tectonics of existing environment, establishing a stance to search for a new typology. In the end, building will show two simultaneous and distinctive connections related to its physical existence: reality in its function and irreductibility, in its ability to forge new dynamic connections with its environment, hybridizing the spatial dimension to a new form of physicality, adaptive and incessantly flexible in the dimension time, becoming a vessel for ever changing contemporary lifestyles.

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of V DMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

This study improved the water repair materials of the polyacrylic system applied to concrete structures by controlling expansion, strengthening water resistance, and improving cohesiveness. The improved polyacrylate repair materials were evaluated against the existing products to verify their performance and level of improvement, and applied on-site to the concrete structures that are leaking the improved water. The verification method measured the presence of water leaks and the moisture content of concrete inside. Moisture levels were measured for two months before and after material installation, and at least 0.8 - 1.7% of humidity was reduced after installing polyacrylic resin, and no leakage was found.

This study is aimed to reflect the current status survey, analysis and response of 10 railway stations using geographical names in one of 19 stations located on Gyeongbu, Honam and Chungbuk line. Most railway stations in the study have shown normal images that are close to the standard type by selecting similar building materials rather than reflecting geographical features. Aside from the shape of the traditional Korean house in Cheongju, almost all newly constructed stations tend to incorporate light gray plating material on their modern exterior to produce Family look design as a railroad station. According to a survey of the sensitivity of the station's name, Osong Station was 73.6 percent, Gyeryong Station 67.3 percent, Heukseok-ri Station was 64.5 percent, Shintan-jin 62.6 percent, and Yeonsan Station 57 percent, more than half. Therefore, the results of the five stations were presented as a calculation and proposed design release focusing on the facades of each station. Each of these stations suggested a way to express the facade design image, considering the railway operation status of Korea Railroad, the area of the station and other surroundings.

The path and visibility of nurses in general hospital wards have been treated as architectural planning factors. However, the analysis approach of existing studies shows limitations that only fixed physical elements are considered without considering the behavior of users using space. Consider factors for analysis of ward and models based on this study model. Select a case hospital to apply the analysis technique and conduct the nurse questionnaire and route survey of the hospital. Establish a framework for analysis model applied with the path of nurse movements. The analysis model applies to the case hospital. The analysis results are aggregated to derive design suggestion for reference to the spatial improvement of the ward. Visible visibility to observe the bedside in the nursing station, visibility to observe the beds in the nurse's path, and visibility to observe patients moving in the nurse's path were derived from visual access frequency and exposure frequency. The survey of nurses' movements at the site allowed the nurses to calculate the distance required to move. Reflecting the path of nurse movement, a model was presented for a comprehensive analysis of nursing distance and nursing visibility, which could lead to improvement in the observation and visibility of nurses and the layout of patient rooms or day rooms.

In this paper, in order to maximize the input process efficiency of the building energy simulation field, the authors developed the automatic extraction module of spatial information based BIM geometry information. Existing research or software extracts geometry information based on object information, but it can not be used in the field of energy simulation because it is inconsistent with the geometry information of the object constituting the thermal zone of the actual building model. Especially, IFC-based geometry information extraction module is needed to link with other architectural fields from the viewpoint of reuse of building information. The study method is as follows. (1) Grasp the category and attribute information to be extracted for energy simulation and Analyze the IFC structure based on spatial information (2) Design the algorithm for extracting and reprocessing information for energy simulation from IFC file (use programming language Phython) (3) Develop the module that generates a geometry information database based on spatial information using reprocessed information (4) Verify the accuracy of the development module. In this paper, the reprocessed information can be directly used for energy simulation and it can be widely used regardless of the kind of energy simulation　software because it is provided in database format. Therefore, it is expected that the energy simulation process efficiency in actual practice can be maximized.

The purpose of this study is to categorize Commercial area by identifying characteristics of blocks and coding them in order to segment use zoning in Commercial area. The study was conducted as follows. Data from building register, cadastral map, statistics annual report are utilized to identify the physical environment of the block. four types used as code under the physical environment classification code which are classification code of physical environment, detail usage, volume ratio, and height type are set, and combine the classification codes sorted by the four types of code. Through the physical environment classification codes, there are currently 37 different block characteristics of the Old downtown Commercial area. Diversity is not reflected. There are only Central commercial area of regulations in Old downtown commercial areas that are uniformly managed. For the renewal, management and development that can occur in the near future, it is necessary to segment of use district in the commercial area. Consider the current situation and future development direction for the management of sustainable commercial areas. Management is required using physical environment classification codes. It is meaningful that it can be maintained, managed and developed in accordance with the characteristics of each block.

Recently, as the shape and function of high-rise buildings have become more complex, engineering for reflecting the constructability in the design phase has the increasing importance. However, engineering tasks are not performed at the appropriate level and timing in most projects, which leads to inefficient work such as design changes and reworks. Hence, this study investigated the constructability knowledge, design elements, and supporting tools required to conduct engineering tasks related to temporary work at the design phase, and also analyzed the relationship between these factors using the correlation analysis. As a result, when the engineering tasks are applied in the design phase, constructability knowledge related to ‘construction method and process’ is the most important and the design factor related to ‘layout/arrangement’ should be considered as the most important factor. Based on the results of this study, the project participants can efficiently use necessary constructability knowledge during the design phase and facilitate effective decision-making and design alternatives for enhancing constructability.

The purpose of this study is to develop an application that supports a user in the maintenance of small photovoltaic device. To this end, this study analyzed the maintenance status, related regulations and existing application contents in Korea. According to the analysis results, most users did not maintain device for themselves. In addition, the maintenance market has not been activated due to its low profitability. Regulations on the maintenance of photovoltaic device prescribed by the KESCO and Japanese counterpart were analyzed to establish the standards for photovoltaic device inspection, and an application was developed based on the existing applications and research results. In order to evaluate the completeness and satisfaction of the developed application, it surveyed 52 users and 22 experts. The survey results showed that the completeness was calculated to be 90 points, and the level of satisfaction was 93 points on a 100-point scale. Therefore, it is expected that the maintenance application developed in this study will be useful for users to maintain the photovoltaic device.

Occupancy-based heating control is effective in reducing heating energy by preventing unnecessary heating during unoccupied period. Various technologies on detecting human occupancy have been developed using complicated machine learning algorithm and stochastic methodologies. This study aims at deriving low-cost and simple algorithm of occupancy inference that can be implemented to residential buildings. The core concept of the algorithm is to combine the occupancy probabilities based on indoor CO2 concentration and PIR(passive infrared) signals. The probability was estimated by applying different levels of decrement ratio depending on CO2 concentration change rate and aggregated PIR signals. The developed algorithm was validated by comparing the inference results with the occupancy schedule in a real residential building. The results showed that the inference algorithm can achieve the accuracy of 75~99%, which would be successfully implemented to the control of residential heating systems.

The present study analyzed what policies are being executed for deteriorated apartments in Japan and what characteristics each policy had in order to examine policy direction and implications for the improvement of vitalization of remodeling business of deteriorated apartments in Korea. The study results are as follows. Japan recognized social problems of deteriorated apartments and pushed forward a national level remodeling actively by preparing financial support of central government and supporting plan by city and province. First, Japan maintained initial performance of buildings through phased maintenance for deterioration of buildings and aimed to reduce environmental load and maintain asset values of buildings through enlarging durability of buildings by responding to lifestyle according to social changes. To this end, they promoted the long life of buildings through the establishment of systematic long term repair plan from the stage of moving in the buildings. Second, in order to reduce the risk of remodeling projects, they prepared an environment where business could be carried out with an easy mind in various aspects by introducing remodeling business registration system and large scale repair construction defect insurance system. Third, they reduced economic burden of main agents of remodeling business with tax preferential treatment and financial support policies. Fourth, they have established remodeling support system based on overall social issues and connected it with social effect that could be obtained through this. The remodeling policies of Japan were carried out in the direction of solving social problems and considering economic aspect rather than just improving individuals’ residence environment.

The two recent excavations at the site of Beopsusa Temple in Seongju revealed that it contained eight building remains, three pedestrian facilities, four drainage facilities, two walls, three embankments, and an estimated pagoda remain. Even though this investigation was restricted to some sections of the site, it confirmed remains of architectural significance and thus attracted the attention of concerned researchers. This study thus set out to make an architectural survey of the site based on the excavation results and examine the characteristics and nature of remains of Buildings No.2 and 3 at the site. The planar analysis results show that Building No.2 (Remains 2-2) at the site of Beopsusa Temple was a gable-roofed building with a single story including 6 kan(間) in the front and 4 kan(間) in the flank and that Building No.3 (Remains 3-3) was a single-story building with a hipped-and-gable roof including 5 kan(間) in the front and 3 kan(間) in the flank. The most noteworthy remain of this excavation was the north-south square platform discovered at the Building No.2 at the site. It is estimated as a high chair platform used for Buddhist sermons. It was confirmed only at the lecture hall remains of Hwangnyongsa Temple and Anyangsa Temple in the nation and had never been found at remains related to Chinese and Japanese Buddhist Temples, being regarded as a very important and unique artifact. Since it was found at the remains of Building No.2, they was estimated as the lecture hall remain at the site. Found at the remains of Building No.3 at the site, the oblong altar remains were also very unique and rare and never found at other Buddhist temple sites. The inside of oblong altar was evenly covered with roof tiles instead of rubble, and there were small crushed stones for internal division, which is an altar construction method distinctly different from its counterparts at other Buddhist temple sites. Those findings raise the possibility high that a wooden facility was put up at the top of oblong remains.