Earticle

This is the study which appear the relation between the situation of Anchor point and the qualities of lithographic prints using the uncoated paper. Anchor point were measured by microscopic photography and Kubelka-munk`s method. The situation of Anchor point increased with print density and print though, but it decreased with evenness and rub off. In case of commercial uncoated paper, the situation of Anchor point was optimized when it was 25~35% apporoximately. In preparation of samples for microscopic photography, the samples were used by the resin testing methods. This method used that the resin fixes the printed papers of sample very hard, in preparation of samples for microscopica potography a good result could be gained by this method.

Recently, the photopolymer made of novolak resin as the base and the naphthoquinonediazide(NQD) as the photoreactive compound is used for the presensitized plate(PS plate). The reaction mechanism of the NQD-novolak resin on light exposure is considered. Upon exposure it undergoes a Wolff rearrangement, via ketene intermediate which react with water ti form an 3-indene carboxylic acid. It was also found that NQD type resin in this experiment shows a high relative sensitivity compared with imported sample from Japan.

The monobath method is accomplished using chemical solution, as processing in a developing and fixing at the same time, into which the exposed photographic material is placed. For this study, we appointed some values to be a standard that to coming as a results by normal processing with the developer D-76 for film Fuji Neopan SS 35mm, and which is compared with a monobath process. The experimental results show that processed condition is useful and applicable in monobath, for FX-6a and Keelan No.315.

Synthetic photoresist have partially displaced the natural materials, but bichromated casein have remained in use until recently at etching industry such as chemical milling. The object of this paper is that the mutual relations among factors and suitable latitude in pattern formation or etching process when is to be applied the casein ammonium bichromate photoresist.

Electrochrominm is a phenomenon of reversible change in optical properties produced electrochromically. Among the several organic type electrochromic displays(ECD), the one based on viologen solution is still attractive and become of the possibility for choosing various colors by introducing different substituents in viologen molecules. But these has been rather a severe problem in this type of ECD, which is the erasing failure caused by the recrystallized molecule sticking to the display electrode.This paper was investigated on developing a new class of composite materials which consists of the mixture of BV2+ . 2BF4-, TMPD with TBABF4 as supporting electrolyte to overcome the above mentioned problem of viologen solution.

Irradiation of aromatic diazonium salts resulted in an effcient elimination of nitrogen, yielding substitution products. This paper was not only studies about photolysis of aromatic diazonium with double salts but also coexistence of ion and radical when they was photolysis. Photolysis of aromatic diazonium was depend on excite wave length therefore photolysis products out put different absorption intensity such other. We also confirmed coexistence of ion and radical when they was accomplished photolysis. In case of BD, there are ion decomposition process about 90 percentage, decreased ion decomposition process the other side radical`s it was becomeing increased according to excite of short-wave length.

A new ink transfer model based on the physical mechanism for the maximum ink transfer rate is proposed, and examined by the experimental data of P.J Mangin et, al. for the relations of the maximum ink transfer rates to the printing pressure, the speed and the roughness of paper substrates. The free ink split coefficient and immobilized ink under the maximum ink transfer rate are calculated by the new model and the experimental data. It is concluded that the new model is very useful, and the free ink split coefficient and the immobilized ink are inversely propotional and propotional to the paper roughness respectively and both are saturated eventually under the critical values.

Digital image processing and computer simulation technics have been rapidly developed according to the advancement of computer, total scanner and DTP system were developed at 1980s. Specially, there is need to simulation surface color of printings to CTR`s color and os required color image prediction of high precision. This dissertation describes a new method of color reproduction prediction, which is very high precision color reproduction prediction, for CRT of DTP system. The experimental results show that described method os useful and valid in color reproduction prediction, for CRT of DTP system