Earticle

The photosensitive properties and carrier transport in the organic photoconductor with the carrier transport layers(CTL) of polymer matrix doped with two carrier transport materials above carrier generation layer(CGL) containing oxotitanium phthalocyanine (TiOPc) were investigated. The CGL of TiOPc dispersed in poly(vinylbutyral) was formed as thickness of 0.1and the carrier transport layer was prepared by coating polycarbonate and polyester doped with oxadiazoly(OXD), polyvinylcarbazole (PVK), trinitro fluorenone(TNF) as thickness of 10~15, respectively. We have measured half decay exposure,sensitivity and xerographic gain from the photo-induced discharge curve(PIDC). In this work, it was found that the characteristics of carrier transport were mainly caused by the ionization potential difference of constitutive materials in molecularly doped polymer.

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

A new conception of "equivalent scattering area" is investigated as a new approaching method for developing the ideal model of optical dot gain, regarding all the main causes such as scattering, multiple internal reflection of light in paper substrates and dot shapes. It is experimentally shown that the conception of equivalent scattering area, B` os very useful for the analysis of optical dot gain, and it can be formulated asmulated as

To investigate relations between Grain-shape of plate and Dot-Gain in the lithography, Printing plates were made by Mechanical Grain, Brush Grain and Electrolytic Grain method.Fine multi-grain by electrolytic method of them resulted in less Dot-grain on the paper, more damping water on the none image part of printing plate.

In the last decade, digital image processing technics have been rapidly developed according to the advancement of electronic technique, and total scanner and DTP system were developed. Specially, there is need to retouch the color and image on the CRT. In this paper, we described a method to display surface color of printing on the CRT, and an algorithm to simulate the color reproduction by offset printing. The experimental results show that the described method and algorithm are useful and valid on the computer simulation of the multi-color printing adapted process ink characteristics.

For the vehicle of UV ink formulated with prepolymer and/or reactive diluent, according to change photoinitiator concentration, we measured viscoelasticity of films of bisphenol A diacrylate cured by UV irrdiation, investigated dynamic characteristics and structural changes.

This syudy analyzed the main bodies, marginal space, Position of the main bodies of current textbooks in high schools and "the eriteria of reading system for textbooks" which was suggested the Department of Education and Provided some suggestions for the improvement. The research methods used for the study were both literature review and survey rdsdarch with a questionaire. Inorder to research for the main body of textbook, space of margin, the optimum position of the main body, sizes of litters, spaces between letters, words, lines, length of lines, sizes of main body and margin, and margin and position of main body were checked through a related literature review. For the questionaire experiment, a questionaire based on data drawn from analysis of current textbooks, :criteria for reading system of textbook" suggested by the Department of Education, and some suggestions for improvement by the researcher was made and used for the test, targetting 384 body and girl student in high schools.n high schools.

This styudy analyzed the main bodies, marginal space, Position of the main bodies of curent textbooks in high schools and "the eriteria of reading system for textbooks" which was sugested the Department of Education and Provided some sugestions for the improvement. The research methods used for the study were both literature review and survey rdsdarch with a questionaire. Inorder to research for the main body of textbook, space of margin, the optimum position fo the main body, sizes of litters, spaces between letters, words, lines length of lines, sizes of main body and margin, and margin, and postitionof main body were checked through a related literature review. For the questionaire experiment, a questionaire based on data drawn from analysis of textbooks, "criteria for reading system of textbook" sugested by the Department of Education, and some suggestions for improvement by the researcher was made and used for the test, targetting 384 body and girl students in high schools.

New methodolgies for the syntheses of unsymmetrical squarylium(SQ) dyes for organic photoconductors(OPC) were developed and photostabilities for these dyes were dicucced. These dyes absorbed at 640-690nm and exhibit high molecular extinction coefficient about 10. photodegradation rate of these dyes is acceralated in the presence if singlet oxygen sensitizer. On the other hand, the photodegradation rate os retarded by adding effective singlet oxygen quencher, such as 2:1 metal dithiolate. It is suggested that the photodegration of unsymmetrical SQ dye may be due to a photo-oxidation involving singlet oxygen.

A new photochromic spiroxazine dye having a pyridinium s-triazine moiety has been prepared. It shows a reversible photochemical color change from colorless to reddish-purple in ethanol solution. In ethanol solution the half life time of the open form was 150sec, which was shortened by raising temperature. Silica-immobilized spiroxazine(6). Fine power of silica-immobilized spiroxazine was changed intensely blue from colorless by U.V. light or sunlight.

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

The Aggregation State of thin vapor deposite Film made by Cyanine Dye were changed into Monomeric molecular state(M) and Dimeric Aggregation(D) at the acidic treatment, into reversible H-Aggregation (H) at alkalic gas or heat treatment. Photo-electric properties were higher H than D and M, this stats were effective in enhancing Photoelectric-conversion characteristic. Substitute group of Meso-Position being stronger electronic Donors, Electronic density is higher and Electric conductivity is enhanced, we confirmed Oscillator Strength calculated by PPP-Molecular Orbital Calculation and Absorption Spectra at solvent stats were agreed good.