Earticle

How do we use onggi, Korean earthenware, for container of dough during fermentation instead of stainless steel container? How does it affect the flavor of bread if onggi tray is used in baking instead of steel tray? We tried to confirm those. As a result, the characteristics of onggi made positive effect on dough in fermenting room. The time, when the temperature of the center in the dough is equilibrated to that of surface on the dough, take shorter in onggi than in stainless steel. It could make the temperature of dough maintained evenly with little deviation, which could result in shorter fermentation time. Volume and surface color of the bread baked on onggi tray were better than on steel tray. The bread baked on onggi tray got higher score on overall acceptability in sensory test than on steel tray. Therefore, if onggi is used during baking, it could produce better quality of bread like making positive effect on fermented foods.

As the foods and household manufacturing technology is developed, the packaging method of products is being changed from single to multi materials and layers. This study were focused on EPR carton packaging, economic and environmental expected effects were predicted by the improvements of packaging materials and structures to reduce effective packaging waste. Especially expected effects were predicted when improving the structure and material of aluminum laminated material was difficult to recycle. Thus, it was assumed the aseptic carton packaging laminated aluminum were replaced with silica laminated films. In conclusion, analysis of economic expected effects were undervalued in this study because of the limitation of assumptions, though this study has significance about a new approach by calculating the data different from the past that the conventional methods like predictive value of government's guidelines or goals.

Gelatin soft capsules, manufactured by the press through package(PTP) process, are widely used in the production of multivitamin dietary supplements and other health functional foods. Gelatin capsules can prevent light and air from having a direct contact with the contents in the capsule, and the nutrients inside the capsules are preserved without any loss. In the present study, on the basis of the results on the safety of gelatin capsules. The parameters investigated included degradation of the capsules before their shelf life, capsule deformation, and changes in specific nutrients. Moisture and heat in the production and storage environments of the capsules caused the gelatin to swell and attach some of the inorganic salts in the vitamin contents. Nutritional component analysis showed that B1, B5, B9, and B12 contents were decreased, while mineral elemental analysis shown calcium, chloride, and zinc compound were found to be infused into the gelatin of the capsule shell.

In this experiment, alcohol and blanching treatments were used for food packaging materials, quality of powder yam and sliced yams (5 mm size) were compared by alcohol concentration and time for measuring change of color, weight, moisture content saccharinity and decomposition. 5% and 10% alcohol were used to alcohol treatment for 5, 10 seconds each. Packaging materials were used OPP(30 μm), PET(25 μm), ON(25 μm) and all materials heat sealable were coated. Quality of powder yam were not changed during storage at low temperature however were changed during storage at room temperature after 5 days. In conclusion, powder yam were needed packaging materials with high water barrier property from moisture, sliced yams were high quality when packaged by ON and stored at low temperature. Therefore, using packaging materials with low oxygen permeability were expected to reduced quality degradation about browning of powder yam and sliced yams.

One-way degassing valves usually designed for coffee packaging are recently applied to the various food packaging such as fermented health functional food or home meal replacement (HMR) packaging. The optimized degassing pressure by food product is important factor for keeping effective freshness and improving preservation of the food, therefore the development of degassing valves specified with various open pressure is needed. In this study, the mechanical characteristics of the degassing valve with ring type rubber disk were analyzed and a mathematical model was developed to predict the open pressure of the valve. The model was verified with test results derived from several available valves, and it may be useful in designing and developing a new valve.

This paper provides an overview of kimchi packaging technology, focusing on packaging materials, package design, and active/intelligent packaging technology for kimchi. From a packaging-material standpoint, although various materials have been used to ensure customer satisfaction and convenience, plastic is the most widely used material, in the form of bags, trays, pouches, and rigid containers. Additionally, recent efforts in the kimchi packaging industry have allowed companies to differentiate their products by using different packaging materials and technologies, while simultaneously improving product safety and quality. On the other hand, the biggest problem in kimchi packaging is excess CO2 production, leading to package expansion and leakage. To alleviate this problem, the use of CO2 absorbers, high CO2-permeable films, and degassing valves, in addition to the use of different packaging systems, has been investigated. Active and/or intelligent packaging systems have been developed, to include active functions beyond simply inert, passive containment and protection of the kimchi product. However, most such approaches are not yet adequately effective to be useful on a commercial scale. Therefore, further studies are needed to resolve the limitations of each technology.

Corrugated board provides packaging for most diverse industries with a share of over 50%, due to the numerous advantages they offer a good protection of the products. In other hand corrugated board fails in environmental conditions, indicating that relative humidity or temperature is higher. These effects directly damage the product packaged. To overcome on this problem recently corrugated boards produced with functional material, “functional corrugated boards,” have become more available in the current market. A number of commercialized forms of functional material are coated or composited products with inorganic materials, for example “Nano clay” as representative. However, although the use of functional materials is increasing in corrugated boards, the several concerns such as over cost, environmental friendly materials, recycling, and toxicity affect consumer perceptions and acceptance. In the past, number of researcher focused on process of box compression and the utility of box compression testing etc., best of our knowledge there is no review paper which focus on the functional corrugated boards used in food packaging applications. This paper aims to review the availability of functional corrugated boards in the current market, past research studies on functional material and present the current status of functional corrugated boards in leading countries.

Packaging is thought to contribute to the consumers' purchasing choice of the powdered infant formula products. In Asian market, the products of international and local brands are competing. Evaluation and analysis of food package functions for a variety of brand products will be helpful for the innovative packaging development. Thus, the packaged products of powdered infant formula were collected in Chinese, Indonesian and Korean supermarkets as a typical Asian market and examined in terms of main food packaging functions. Metal cans were the most dominant type of big size package (800-1000 g) while flexible bags were often the common one of medium size (400 g). In general, convenience function was provided in forms of easy opening device and portioning take-out spoon. Information on primary and secondary shelf lives was given besides nutritional facts and use instruction for communication function. The combination of N2 and CO2 was usually employed to protect powdered infant formula in rigid packages, whereas only N2 was used to protect product in most flexible packages.

The effect of packaging material in enhancing the shelf life and maintaining the postharvest quality of endive (Cichorium endivia L.) was studied. Endive were packed in three packaging materials: paper box (control); paper box with endive wrapped in high density polyethylene (HDPE) film; and plastic box container covered with high density polyethylene (HDPE) film. The quality characteristics, such as fresh weight loss, soil plant analysis development (SPAD) value, and appearance of endive were investigated during 20 days of storage at 2oC. The endive wrapped with HDPE film inside the paper box showed the lowest weight loss, highest SPAD value and the best appearance compared to those wrapped in other packaging types during storage. The results indicate that the marketability of endive can be optimized with proper packaging and storage.

A kimchi container actively controlling CO2 concentration by timely flushing of CO2 gas was structured and tested in its capability and effectiveness because high CO2 concentration enhances the sensory flavor of the product. The inlet and outlet valves of CO2 gas were programmed to open and close allowing synchronous vent/CO2 flush according to the requirements of its dissolution in the contained kimchi. During the chilled storage, the headspace of container could be maintained at desired high CO2 concentration providing the preferred kimchi in sensory quality compared to control of the conventional container. However, there was no significant difference between the high CO2 container and control (container simply closed with air) in kimchi quality attributes of pH, titratable acidity, total viable bacterial count, Lactobacillus sp. count and Leuconostoc sp. count. The flow rate and time interval of CO2 flushing need to be adjusted considering the kimchi amount, headspace volume and ripening time. The designed system has potential to be applied in refrigerator appliances in homes and food service industry.

Flower-like zinc oxide (FZnO) was successfully synthesized via a sonochemical process. The chemical structure, morphology, and antimicrobial properties of as- prepared FZnO were investigated. Additionally, pure LDPE and five different LDPE/FZnO composite films were prepared with different FZnO content by using a twin screw extruder. According to the FTIR and SEM analyses, there exists weak interfacial interaction between LDPE and FZnO. Compared with pure LDPE, the LDPE/FZnO composite films showed UV barrier and enhanced antimicrobial activity against Escherichia coli (E. coli) as a Gram-negative micro-organism and Staphylococcus aureus (S. aureus) as a Gram-positive micro-organism. To enhance the interfacial interaction and good dispersion of FZnO into the LDPE matrix, and resultantly to such as UV barrier and antimicrobial properties of LDPE/FZnO composite films as the packaging materials, further efforts are required.

This study investigated the effects of the oxygen permeability of vacuum packaging film and the storage temperature on the quality and shelf life of Hamburg steaks during storage for 14 days. Control samples (C) were packaged in a polyamide/polyethylene (PA/PE) film and stored at 5°C. Treatment samples were either packaged in an ethylene vinyl alcohol/polyethylene (EVOH/PE) copolymer film and stored at 5°C (T1), and in a PA/PE film and stored at -18°C (T2). The initial total plate count (TPC) was 3.6 log cfu/g. In T1 samples, TPC and Brochothrix thermosphacta counts were increased, similar to those in C samples, whereas Pseudomonas spp. counts were significantly lower than those in C samples during storage. Over the storage period, the volatile basic nitrogen values increased most rapidly in C samples, followed by T1 and then T2 samples. The values of thiobarbituric acid reactive substances steadily increased in all samples during storage. The colour parameters were not significantly different among the samples during storage. T1 samples maintained sensory qualities in flavour and off-odour parameters for two days longer than C samples did. At day 12, T2 samples were evaluated as being below the marketability score of 5.0 for texture. In conclusion, using high oxygen barrier films like EVOH/PE copolymer for packaging Hamburg steaks could extend the sensory qualities in view of flavour and off-odour during chilled storage. However, frozen storage at -18°C is recommended when the storage period is extended beyond 14 days at 5°C.

This survey was performed by Kasetsart University Department of Packaging and Materials Technology on Food Packaging Industry in Thailand, was to conduct on the status and trends of food packaging industry to obtain the information on the plastic of packaging materials in food packaging in Thailand. The survey conducted by field visits, questionnaires, interviews and personal communication as well as published data from different sources. The ration of plastic consumption among the industries, packaging is showed 49%, textile 15% and construction 11% respectively. Numbers of company among packaging industry, film processing company is 503, injection molding is 231, blow molding is 216. Production volume of PP, HDPE, LLDPE and LDPE is 1,950 mil. ton, 1,920 mil. ton, 1,150 mil. ton and 685 mil. ton, respectively. Import of plastic 16,668 mil. baht and export is 33,778 mil. baht. Plastic consumption is plastic bottle and flexible pouch, mainly being used in beverage industry. The past decade as it has been replaced by flexible pouches and aseptic cartons in Thailand.

In order to reduce packaging and logistics costs for any business, it is important to identify opportunities for improvement throughout an entire logistics system including measurement of the performance and cost of packaging. Although the importance of packaging in a supply chain has been recognized by many scholars and experts, the total cost and value of packaging have not been successfully estimated. This paper reviews the recent researches and articles that tried to quantify the value of packaging focusing on the business decision between reusable and expendable shipping container systems. Three key factors such as cost, ownership, and standardization are identified and discussed in terms of impact on supply chain costs and performances. It is important to understand that the decision of a package system can change a logistics activities and even entire logistical system. Hence, the total cost and value of transport packaging should be calculated with understanding of interactions with logistical activities throughout supply chain. Identifying the opportunities and constraints of packaging changes on total logistics cost and activities must be carefully examined before implementation of a packaging system.

Fresh-cut agricultural products provide convenience to consumers. However, quality changes or microbial growth can easily occur due to physical changes such as cutting and peeling etc. during processing. Therefore, efforts have been made to develop a functional packaging for extension of shelf life of fresh-cut agricultural products, food etc., and researches on prolongation of storage period have been actively developed. The shelf life is extended by antimicrobial, far infrared rays, air permeability, anti-fogging, weak current, ethylene gas adsorption or decomposition, gas composition changes such as MA (Modified Atmosphere) or CA (Controlled Atmosphere). The method of extending the shelf life by various complex factors. This paper based on the published literature to extend the shelf life of fresh-cut agricultural products, food etc., The paper has summarized the storage period extension packing method, packaging material for shelf life extension and comprehensive evaluation method.

In this study, Biodegradable masterbatch (M/B) was prepared by different kinds and content of biodegradable catalysts added to oxo biodegradable plastics. The bio film was prepared by adding biodegradable M/B to the polyethylene pellet, and the change of physical properties by UV and heat treatment and the stability as food packaging material were confirmed. As a result of the physical property change, Fe salt and Al salt bio film was superior to Ni salt bio film about a decrease in physical property. However, considering the raw material cost and industrial availability, M/B containing Fe salt was selected and additional experiments were conducted by concentration. The bio films prepared with Fe salt M/B 1.0, 1.5 and 2.0 wt% showed excellent physical properties.

This paper describes an overview of the packaging industry in Korea. Packaging plays an important role to connect the dot between primary and secondary industry. Moreover, it performs the visual merchandising of product, resulting in synergetic effect with quality of merchandise. As more convergence of primary and secondary industry accelerates, packaging industry became more competitive as well as critical area. Korea Packaging Center (KOPACK) in Korea Institute of Industrial Technology (KITECH) has conducted the national market survey of packaging industry since 2010, biannually. Firstly, Korea packaging industry was categorized. For defining the Korea packaging industry, Korea Standard Industry Code (KSIC) is used to divide the group into wood, paper, plastic, glass, metal and packaging machinery. Based on these categories, the market size was estimated with survey of 2,180 packaging companies. In this study, the results of this survey are summarized, and the key trends of each category are described.

The purpose of this study was investigated the quality changes before and after harvesting, storage and, processing of onion. Experiments were carried out to compare the effect on the characteristics of the postharvest from preharvest factors using onion. This experiment had identified the characteristics of harvested onions after cultivating with several preharvest factors such as the light and water conditions. These tests were conducted in an onion growth in the field, storage, and processing of fresh-cut during a laboratory periods of 2 years. In first year, onion cultivars (‘Kars’ and ‘Pop’) were produced under stable or unstable environment conditions, these onions were stored at low temperature(0?). Measurement was evaluated by the growth amount after harvesting, and the fresh weight loss and respiration rate during storage. According to different culture conditions and storage temperatures, it was investigated the properties of the freshcut onion. Growth of onion was varied depending on the cultivars and culture conditions. The amount of growth on ‘Kars’ and ‘Pop’ onions were decreased by excessive soil water conditions with shading. These influences were found the morphological differences resulting for the cell tissue of onion being rough and large. Onion cultivated in excessive soil water with shading affected the degree of its respiration rate and fresh weight loss during storage. Ones in excessive soil water with shading were higher than the control in fresh weight loss and respiration rate, respectively. However fresh-cut onion could not investigated to clarify the difference due to effects of cultivation condition and storage temperature on some measure items such as electrolyte leakage and microbial number change. There was a change of only electrolyte leakage depending on the storage temperature, rather than cultivated conditions before harvesting factor. The results showed that the onion grown on in the good environment was represented to a good quality produce even after harvesting.

As one of traditional packaging materials, paper and paperboard are being more popular and beneficial thanks to their environmental sustainability and have been widely used in packaging applications, from light weight infusible tissue for tea/coffee bags to heavy duty boards for the distribution. Papermakers have to design the products having a desired customized function with their paper machine. Globally, the use of filler and pigment in papermaking is now a very common practice to meet the needs of customers. Many benefits can be achieved as a result of filler addition, which mainly includes cost and energy savings. The replacement of traditional mineral fillers and pigments with biodegradable and renewable carbohydrate polymers is a very interesting and promising research topic due to the concern of environmental impact. In this review paper, the use of traditional and novel carbohydrate fillers and pigments in cellulosic paper is highlighted. It is noteworthy that there are still some challenges and technical barriers associated with the use of these organic materials in point of structural stabilities and manufacturing costs, although most of them are available in market as the commercialized products. With the emerging nanotechnologies, it is believed that the use of carbohydrate-based filler and pigment for papermaking will increase and bring technical advantages to industry.

In this study, we analyzed the empty body weight and nominal volume of different types of polyethylene terephthalate (PET) bottles commercialized in Korean market. Over 780 PET bottles were collected and classified into four types, heat resistance bottle, normal resistance bottle, pressure resistance bottle, and long period using bottle. Each PET bottle’s lightness index was established using bottle weight and nominal volume. Based on the index value, “acceptable” and “optimum” criteria for design guideline of PET bottle were summarized for each PET bottle type. In this paper, we suggest the use of PET bottle lightness index as a design guideline for material resource reduction of PET bottle for Korean beverage industries and bottle makers. For example, we can achieve 2~4 g weight reduction in normal pressure bottle for 500 mL drinking water.