2025 (21)
2024 (13)
2023 (20)
2022 (24)
2021 (7)
2020 (21)
2019 (6)
2018 (8)
2017 (8)
2016 (9)
2015 (9)
2014 (15)
2013 (19)
2012 (17)
2011 (29)
2010 (22)
2009 (16)
2008 (14)
2007 (13)
2006 (7)
2005 (6)
2004 (8)
2002 (15)
1998 (30)
1997 (33)
1996 (22)
1995 (4)
An evaluation of length measurement in 2D images and its usefulness with various calibration methods
대한디지털의료영상학회 대한디지털의료영상학회논문지 Volume 26 Number 2 2024.10 pp.1-10
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
목적: 혈관의 정확한 직경 및 크기 측정을 위하여 Calibration methods를 이용하여 재구성한 영상에서 제공되는 직경 및 크기 정보에 대한 상관관계 확인 및 비교 분석을 통해서 임상 적용의 효율성을 평가해보고자 한다 대상 및 방법: 16Fr와 8Fr sheath에 조영제를 채워 준비하고 2D-DSA와 3D-RA로 영상을 획득한다. 획득한 영상에 Calibration methods 중 5가지 Calibration tool 을 적용한 뒤, 총 3개의 영역(내경, 직선형 구간, 휘어진 구간) 에서 길이 측정을 수행하였다. 측정 결과는 각각의 대조군과 비교하였다 결과: AP view에서는 정규화 차이(Normalized difference)가 대부분 ±10% 미만으로 나타났으나, ISO 및 Catheter calibration 에서는 최대 -13.2%의 차이를 나타내었다. 다른 각도 조건(20°, 40°)에서도 전반적으로 ISO 및 Catheter calibration에서 큰 Normalized difference를 보였으며, 상대적으로 TOD 방식이 일관되게 낮은 Normalized difference를 보였다. 결론: 시술 상황을 기준으로 적절한 Calibration tool을 적용하여 혈관의 직경과 크기 측정을 하는 것이 중재 시술 시 보다 정확한 치료 재료 선택에 도움이 되어 시술의 성공 결과를 높일 수 있으며 또한 높은 수준의 의료 서비스 를 환자에게 제공할 수 있는 기회가 될 것으로 판단된다.
A measurement of three difference areas (inner diameter, straight length, curved segment) of the device was conducted with five calibration tools in order to accurately measure the diameter and size of the vessels. Results of the measurements were compared with each corresponding control group. Overall, results showed a certain degree of accuracy and uniformity. But, there were significant normalized differences observed in ISO and Catheter calibration, while the TOD method consistently showed lower normalized differences. Applying the appropriate calibration tool can help to choose more accurate treatment materials during interventional procedures and improve the successful outcomes of the procedures. Moreover, it could be a potential opportunity to provide high-quality medical services to patients.
Evaluating the usefulness of AI-based Deep Learning Image Reconstruction in ‘CT Fat-amount’
대한디지털의료영상학회 대한디지털의료영상학회논문지 Volume 26 Number 2 2024.10 pp.11-18
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
본 연구에서는 지방량을 측정하는 Fat-amount 검사에서 FBP(Filtered back projection), IR(Iterative Reconstruction)과 함께 DLIR 기법을 이용하여 영상을 재구성한 후 HU(Hounsfield unit), VFA(Visceral Fat Area), SFA(Subcutaneous Fat Area), V/S(Visceral-Subcutaneous Fat Ratio), SD(Standard Deviation)을 비교하여 DLIR의 유용성을 평가했다. 지방의 정량적 측정에서는 FBP, ASIR-V와 DLIR이 통계적으로 유의한 차이 없는 결과를 도출할 수 있었고, 오히려 SD은 DLIR에서 낮아져 Fat의 정량적 측정은 동일하면서, 영상의 질을 높일 수 있는 임상적 으로 충분히 가치 있는 기법이라고 보여진다. 타 검사에 비해 큰 단점으로 지목되고 있는 방사선량을 줄이는 데에 있어 충분한 가지가 있다고 사료된다.
In this study, in ‘CT Fat-amount’ to measure the amount of fat, the image was reconstructed using the DLIR technique along with FBP (Filtered back projection) and IR (Iterative Reconstruction), and then HU (Hounsfield unit), VFA (Visceral Fat Area), and SFA The usefulness of DLIR was evaluated by comparing (Subcutaneous Fat Area), V/S (Visceral-Subcutaneous Fat Ratio), and SD (Standard Deviation). In the quantitative measurement of fat, FBP, ASIR-V, and DLIR were able to produce results with no statistically significant difference. Rather, the SD was lower in DLIR, so the quantitative measurement of fat was the same, but the quality of the image could be improved clinically. It appears to be a worthwhile technique. It is believed that there are sufficient ways to reduce the radiation dose, which is considered a major disadvantage compared to other tests.
대한디지털의료영상학회 대한디지털의료영상학회논문지 Volume 26 Number 2 2024.10 pp.19-30
※ 기관로그인 시 무료 이용이 가능합니다.
4,300원
갈비뼈 골절의 조기 진단은 심각한 합병증을 예방하는 데 중요하다. 그러나 X-선 투사의 진단율은 50% 미만으로 보고된다. 따라서 이번 연구에서는 갈비뼈 골절 진단율을 개선하기 위한 후향적 임상 연구와 전향적 연구를 수행하였다. 최적의 환자 회전 각도를 계산하고 콜리메이션을 결합하여 이미지 품질을 개선하고자 하였다. 본 연구에서는 가장 빈번 한 골절 부위인 7th Rib 레벨의 후방-측면 부위를 기준으로 최적의 각도는 30°로 계산되었으며 기존 각도(45°)로 정량적 으로 평가한 결과 후방-측면의 가시화된 면적이 갈비뼈 6th 레벨에서 9th 레벨의 결과를 얻었다. 평균 16.27% 증가하였 고 갈비뼈 후방 부위와 척추의 중첩은 70.31% 감소했다. 더 나아가 콜리메이션을 사용했을 때 정량적 값(SNR: 104.97%, CNR: 199.38%)이 증가하는 것이 확인되었으며 정성적 값도는 1.3% 감소하는 결과를 얻었다. 따라서 갈비뼈 골절이 의심되는 환자의 X-선 검사 시 최적의 각도(30°)와 콜리메이션(11.8 * 11.8인치)을 적용하는 것을 제안한다.
In this study, Early diagnosis of rib fractures is important to prevent serious complications. However, the diagnostic rate of X-ray projection is reported to be less than 50%. Accordingly, we conducted a retrospective clinical study and a prospective study to improve the rib fracture diagnosis rate, calculated the optimal patient rotation angle, and combined collimation to improve image quality. in this study, The optimal angle was calculated as 30° based on the posterio-lateral Site at the 7th Rib level, which is the most frequent fracture site, and as a result of quantitative evaluation with the existing angle (45 °), the visualized area of the posterio-lateral was found from the rib 6th Level to the 9th Level. increased by 16.27% on average, and the overlap between the rib posterior site and spine decreased by 70.31%. When using collimation, an increase in quantitative value (SNR: 104.97%, CNR: 199.38%) was confirmed, and qualitative value also decreased by 1.3%. Therefore, we would like to suggest applying the optimal angle (30°) and collimation (11.8 * 11.8 inch) when examining X-rays for patients suspected of having a rib fracture.
According to the Dual Energy CT energy weight change image quality assessment
대한디지털의료영상학회 대한디지털의료영상학회논문지 Volume 26 Number 2 2024.10 pp.31-38
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
대조도가 강화된 CT에서는 칼슘을 관찰하기 위해 윈도우 설정을 통한 듀얼 에너지 테스트 후 조건 결정을 통해 물질을 관찰할 수 있다. 따라서 CT에서는 듀얼 에너지 테스트 후 수행된 후보 결정은 80kVp 및 140 kVp의 에너지에 대한 비율을 통해 이미지 판별력이 형성된다. 이번 연구에서는 CT영상의 대조도 강화 조건에서 0.3 ~ 0.5 g의 칼슘을 주사기 에 주입한 후, SECT의 120 kVp + 200 mAs에 초점을 맞춰 DECT + AEC, DECT + 200 mAs, DECT + 300 mAs, DECT_400mAs로 선량을 변경하여 선량과 영상 품질의 변화를 관찰하여 대조 강화 주사기에서 칼슘의 최소 판별력에 대한 mAs의 에너지 가중치와 값을 얻었다. 선량의 DLP는 SECT의 경우 72 mGy, DECT+AEC의 경우 74 mGy, DECT + 400 mAs의 경우 91 mGy, DECT + 300 mAs의 경우 68 mGy, DE + 200 mAs의 경우 46 mGy의 결과를 얻었다. SECT에 따른 SNR 차이는 SECT – DE AEC의 경우 0.33 ± 0.19, SECT-DE 400 mAs의 경우 0.43 ± 0.26, SECT-DE 200 mAs의 경우 0.22 ± 0.21로 모두 유의한 차이를 보였다. SECT에 따른 CNR 차이는 SECT-DE 400 mAs의 경우 0.062 ± 0.22, SECT-DE 300 mAs의 경우 0.036 ± 0.35, SECT-DE 300 mAs의 경우 0.092 ± 0.27, SECT-DE 200 mAs의 경우 0.490 ± 0.28로 모두 유의한 차이를 보였다.
For the observation of calcium in contrast-enhanced CT, it can be observed through candidate crystals after window setting or dual energy tests. The candidate crystals performed after the Dual energy test generate image discrimination power through the ratio to the energy of the 80 and 140 kVp. In this study, 0.3 ~ 0.5g of calcium was inserted into a syringe under contrast-enhanced conditions, and then the dose was changed to DECT+AEC, DECT+200mAs, DECT+300mAs, and DECT_400mAs, focusing on SECT's 120kVp+200mAs, to observe changes in the dose and image quality of images to obtain energy weights and values of mAs for the minimum discrimination power of calcium in the contrast-enhanced syringe.. The DLP of the dose is 72 mGy for SECT, 74 mGy for DECT + AEC, 91 mGy for DECT + 400 mAs, 68 mGy for DECT + 300 mAs, and 46 mGy for DE + 200 mAs. The difference in SNR based on SECT is that SECT – 0.33±0.19 for DE AEC, 0.43±0.26 for SECT-DE 400 mAs, 0.22±0.21 for SECT-DE 200 mAs, all of which showed significant differences. The difference in CNR based on SECT was 0.062±0.22 for SECT-DE 400 mAs, 0.036±0.35 for SECT-DE 300 mAs, 0.092±0.27 for SECT-DE 300 mAs, and 0.490±0.28 for SECT-DE 200 mAs, all of which showed significant differences.
Sequential Verification of Vascular Regeneration and Bone Regeneration Using Mouse
대한디지털의료영상학회 대한디지털의료영상학회논문지 Volume 26 Number 2 2024.10 pp.39-44
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
외부충격에 의해 손상된 조직 재생은 단순한 형성이 아닌 복잡한 구조로 형성된다. 파괴된 조직 손상에 중요한 것은 손상된 부위 내부 조직에 원활한 재생을 위해 신생혈류 재생이 무엇보다도 우선적이다. 따라서 손상된 조직 내부에 조혈모세포 및 혈류세포가 분화하기 적합한 환경 상태로 유지하는 것이 중요하다. 조직재생을 위한 다양한 줄기세포가 기능세포로 분화되기 위해 파괴된 조직에 충분한 산소 공급은 조직 및 혈관 재생에 필수적이다. 또한 조직재생내의 세포들에게 영양분 공급은 혈류를 통하여 이루어지기 때문에 신생혈관의 재생은 조직 재생에 있어서 중요한 역할을 하게 된다. 결국 신생혈관의 형성은 파괴된 조직재생 내부의 미분화세포들에게 중요한 영양 공급원이 된다. 결과적으로 신생 혈관재생과 다양한 혈관가지의 생성은 파괴된 조직 내부에 영양분을 공급하여 재생효과를 극대화 할 수 있게 된다. 따라서 이번 연구는 생명공학 분야의 체내 실험에 널리 사용하고 있는 쥐를 사용하여 쥐 혈관조영방법과 쥐 혈관의 재생의 구분 방법을 간단하게 제시하고 한다. 방사선 흡수물질인 마이크로필이라는 재료를 사용하여 인위적으로 쥐의 두정부위에 결손을 구현한 후 결손된 두정부위에 혈관재생 분석을 마이크로시티를 사용하여 구분하였다. 결과적으로 이번 연구는 결손된 쥐 두정부의 상의 혈관 재생은 혈관재생이 먼저 일어나며 이후 뼈 재생이 형성됨을 확인 할 수 있다.
Regeneration of tissue damaged by external shock is not a simple formation, but a complex structure. What is important for damaged tissue damage is the regeneration of new blood flow, which is a priority above all else for smooth regeneration of the internal tissues of the damaged area. Therefore, it is important to maintain an environment suitable for differentiation of hematopoietic stem cells and blood cells inside the damaged tissue. In order for various stem cells for tissue regeneration to differentiate into functional cells, sufficient oxygen supply to destroyed tissues is essential for tissue and blood vessel regeneration. Additionally, because nutrients are supplied to cells within tissue regeneration through blood flow, the regeneration of new blood vessels plays an important role in tissue regeneration. Ultimately, the formation of new blood vessels becomes an important source of nutrition for the undifferentiated cells inside the damaged tissue regeneration. As a result, new blood vessel regeneration and the creation of various blood vessel branches can maximize the regenerative effect by supplying nutrients to the inside of the destroyed tissue. Therefore, this study uses mouse, which are widely used in in vivo experiments in the biotechnology field, to simply present a method for distinguishing between mouse angiography and mouse blood vessel regeneration. After artificially creating a defected in the parietal region of mouse using a materials called microfill, a radiation absorbing materials, vascular regeneration analysis in the defected parietal region was performed using μCT. As a result, this study could be confirm that vascular regeneration occurs first in the defected mouse parietal region, followed by bone regeneration.
0개의 논문이 장바구니에 담겼습니다.
선택하신 파일을 압축중입니다.
잠시만 기다려 주십시오.