Earticle

The purpose of this study is to introduce the Inventogram program and create new ideas and looking to take advantage of this product. So all this research is that it can be an easy invention. In this study, we'll demonstrate the idea of creating a derivation of the coffee roaster grinder to crush the coffee green bean utilize Inventogram program to prove it.

In this paper, research development about a bladder press forming system has been carried out for sheet metal forming. The bladder press forming system consists largely of three units as follows forming process unit, driving unit and hydraulic power unit including bladder. Structural analysis of frame of total system by the ANSYS program, flow analysis of bladder by CFX version 14 and hydraulic circuit analysis by AMESim were carried for basic design of bladder press forming system. We can get a good forming results from bladder press system. Developed bladder press forming system will be largely used in aircraft manufacturing industry field.

In this study, the effect of upper die type on the load characteristics of lower die and the wasted material was studied numerically. The different shapes(A-type, B-type, and C-type) of upper die were applied. Also finite element analysis method was applied for the analysis in each stage. The half of X, Y plane was analyzed due to the symmetrical shape in order to reduce the analysis time and be accurate results. The coefficient of friction was set to oil_cold conditions as refer to the system library. It was revealed that principal stress was the order in A, C, and B. A and B type have the highest value in 4 stage, and C type shows the highest value in 3 stage. In addition, Von mises stress were higher in order A, B, and C. A and B type have the highest in 4 stage, and C type shows to have about the same value in the 2 - 5 stage. The load was generally higher than C type. The load of C type was reduced in YY-direction at each stage without 2, 5, 6 stage.

In this study, we have developed an automatic manufacturing system for functional wood plastic composites(WPC) which are one of spotlighting materials for landscape architecture and residential construction material. In addition to the existing facilities, this manufacturing system is consist of an automatic hole manufacturing device, iron band supply and winding device, mold with the iron band insert system, calibration unit, control system, etc. We have performed the performance tests for the system such as the specific gravity, bending strength, screw holding power, percentage of moisture content, formaldehyde, absorption thickness, expansion rate, cold resistance(appearance & bending strength), and shock resistance. As a result, the performance of the prototype system satisfies all the objects of this study.

In this paper, we developed the hydraulic leveling jack(HLJ) with double-tube type structure which could be applicable to excessive lateral load area. In order to develop HLJ, the design requirements, such as the vertical and lateral loads where applied to hydraulic jack, were selected. To verify the structural stability of the HLJ, the structure analysis was performed. In order to verify the operational performance and structural stability of the developed HLJ, test bench was designed. The performance of HLJ was verified via various test using test bench.