Earticle

현재 위치 Home

Issues

한국차세대컴퓨팅학회 논문지 [THE JOURNAL OF KOREAN INSTITUTE OF NEXT GENERATION COMPUTING]

간행물 정보
  • 자료유형
    학술지
  • 발행기관
    한국차세대컴퓨팅학회 [Korean Institute of Next Generation Computing]
  • pISSN
    1975-681X
  • 간기
    격월간
  • 수록기간
    2005 ~ 2026
  • 등재여부
    KCI 등재
  • 주제분류
    공학 > 컴퓨터학
  • 십진분류
    KDC 566 DDC 004
Vol.22 No.5 (16건)
No
1

전력 설비 유지보수 최적화는 예산이 제한된 상황에서 시스템 신뢰도를 확보하고 장기적 자산 건전성을 유지하기 위한 핵심 과제이다. 기존의 유지보수 최적화는 비용 효율을 중심으로 수행 되어 일반보수와 같은 저비용 전략을 선호하여 교체 전략을 과소 선택할 수 있으며, 특정 설비 그룹에 유지보수 예산이 편중되는 한계가 있다. 본 연구는 이러한 한계를 완화하기 위해 범용적인 유지보수 최적화 문제(P0)를 정식화한 후, 잔여 수명 기반 교체 전략 강화 기법(P1)과 그룹별 균형 유지보수 기법(P2)을 제안한다. P1은 2-모수 Weibull 분포로부터 계산한 기대 잔여 수명을 바탕으로 교체 중요도 가중치를 정의하여, 수명이 다한 설비의 교체 선택 가능성을 높인다. P2는 그룹 간 유지보수 편향을 완화하는 기법이며, 이를 구현하기 위해 라그랑주 완화 및 부분경사법을 사용한다. 다양한 설비 수 및 그룹수 조건에서 실험을 수행한 결과, 전통적인 유지보수 최적화 기법은 모든 조건에서 교체 전략을 선택하지 않았으나, 제안하는 P1 및 P2는 수명이 다한 설비를 교체하는 전략을 선택하였다. 또한, P2는 P1 대비 그룹별 예산 변동계수를 문제 규모가 커질수록 더 크게 감소시켜(설비 수 1,000 기준, 최대 31.1% 감소) 그룹별 예산 불균형과 설비간 유지보수 불평등을 상당수준 완화했다. 아울러 제안 기법을 비용효율 그리디 및 잔여 수명 임계 기반 교체 규칙과 비교하여, 단순 규칙이 신뢰도와 형평성을 크게 훼손하는 것과 달리 제안 기법은 예산 제약 조건에서 최적성과 그룹 형평성을 동시에 확보함을 확인하였다. 마지막으로, P0 및 P1의 실행 시간은 1초 미만이며 반복 수렴이 필요한 P2의 경우에도 일반 사양의 노트북에서 약 10초 이내로 측정되어, 제안하는 모든 기법이 유지보수 계획 수립 문제에 실용적으로 적용될 수 있음을 확인하였다.

Optimizing maintenance for power equipment is a critical task for ensuring system reliability and sustaining long-term asset health under budget constraints. Conventional maintenance optimization is typically driven by cost efficiency, which favors low-cost actions such as general maintenance, potentially leading to the underselection of replacement strategies and the concentration of maintenance budgets on specific equipment groups. To address these limitations, after formulating a general maintenance optimization problem (P0), this study proposes a remaining useful life (RUL)-based replacement strategy reinforcement method (P1) and a group-balanced maintenance method (P2). Based on the expected remaining useful life estimated from a two-parameter Weibull distribution, P1 defines replacement-importance weights to increase the likelihood of selecting replacement for equipment that has reached the end of its useful life. P2 mitigates maintenance bias across groups using Lagrangian relaxation and the subgradient method. Experimental results under various numbers of equipment units and groups show that, whereas conventional maintenance optimization never selected replacement under any condition, the proposed P1 and P2 selected replacement for equipment that had reached the end of its useful life.In addition, compared with P1, P2 reduced the coefficient of variation of group-wise budgets increasingly with problem size (up to 31.1% for 1,000 units), significantly alleviating both inter-group budget imbalance and inequality in maintenance allocation. Furthermore, compared with a cost-efficiency greedy rule and a remaininguseful- life threshold replacement rule, the proposed methods attained both budget-constrained optimality and group equity, whereas the simple rules severely degraded reliability and equity. Finally, the runtimes of P0 and P1 were under 1 second, and even P2, which requires iterative convergence, completed within about 10 seconds on a commodity laptop, confirming the practical applicability of all proposed methods to maintenance planning problems.

2

공공기관이 생성형 AI를 도입할 때는 개인정보 입력, 내부자료 외부전송, 클라우드·SaaS 이용, 학습데이터 재사용, 접근권한, 로그·감사, 인간검토, 사고대응을 함께 검토해야 한다. 그러나 관련 기준은 국가·공공기관 AI 보안 가이드, 생성형 AI 활용 보안 지침, 개인정보 처리 안내서, AI 프라이버시 위험관리 모델, AI 영향평가 및 안전성 지침등에 분산되어 있으며, 대부분 원칙 중심으로 제시된다. 이로 인해 실무자는 공개 가이드의 원칙을 구체적인 점검질문, 보안통제, 이행증빙으로 일관되게 전환하기 어렵다. 본 연구는 원칙형 보안 지침과 실무 검토 항목 사이의 불일치를 줄이기 위해 AI 보안 예비검토 브리지 모델을 설계하고 실제 전문가 참여 서면 심층검토를 통해 모델을 탐색적으로 검토한 설계 연구이다. 아울러 공공기관 정보보안 실무경력 5년 이상과 보안성 검토 경험을 보유한 실제 전문가 1명을 대상으로 반구조화 서면 질의·응답 방식의 심층검토를 수행하여 모델의 필요성, 단계 구성, 보안항목, 책임주체, 이행증빙 및 예비판정 기준을 검토하였다. 제안 모델은 공개 AI 보안·개인정보보호 관련 문서 11종에서 생성형 AI 도입 전 검토와 관련된 보안 요구 의미 단위 96개를 추출하고, 이를 8개 보안 영역으로 분류한 뒤 중복·포괄 관계를 정리하여 64개 점검질문(Check)으로 전환하였다. 이후 각 점검질문에 보안통제(Control), 이행증빙(Confirm), 예비판정(Review)을 연결하여 58개 보안통제, 52개 이행증빙, 24개 예비판정 기준을 도출하였다. 또한 외부 AI 번역 서비스와 보안 로그 요약 시나리오에 예비 적용하여 개인정보 포함 여부, 외부전송, 학습 재사용, 접근권한, 로그 보존, 인간검토와 관련된 검토 항목과 증빙 요구가 도출되는 과정을 보였다. 본 모델은 공식 승인 기준을 대체하지 않고, 공개 가이드의 원칙을 보안성 검토 준비에 필요한 실무 항목으로 연결한다.

Public institutions adopting generative AI must review personal data input, external transfer of internal records, cloud and SaaS use, reuse of input data for training, access control, logging and auditability, human review, and incident response. However, relevant criteria are dispersed across public AI security guides, generative AI security guidelines, privacy guidance, AI privacy risk management models, and AI safety and impact-assessment documents. Because these documents are often principle-oriented, practitioners may find it difficult to determine what to ask, which controls to require, and what evidence to review before a formal security assessment. To bridge this gap, this study proposes the AI Security Pre-Review Bridge Model. The proposed model analyzes 11 publicly available AI security and privacy documents, extracts 96 security-relevant requirement units related to pre-adoption review of generative AI, classifies them into eight security domains, and consolidates overlapping or inclusive items into 64 Check questions. The model then links each Check question to Control measures, Confirm evidence, and Review criteria, resulting in 58 Control measures, 52 Confirm evidence items, and 24 preliminary Review criteria. A preliminary application to synthetic scenarios, including external AI translation and AI-based security log summarization, demonstrates how the model derives review items and evidence requirements related to personal data, external transfer, training-data reuse, access control, log retention, and human review. In addition, a semi-structured written expert review using structured ratings and open-ended questions was conducted with one information-security practitioner who had more than five years of relevant experience and experience in public-sector security reviews. The proposed model does not replace formal approval standards; rather, it serves as a bridge between public guidance and practical preparation for security review.

3

숏폼 비디오 서비스에서는 빠른 화면 전환으로 인해 다음 비디오의 초기 재생 지연을 줄이는 것이 중요하다. 프리패칭은 이를 완화할 수 있지만, 가용 대역폭과 클라이언트 버퍼가 제한된 환경에서는 불필요한 전송으로 자원 낭비가 발생할 수 있다. 추천 또는 검색 모델이 생성한 후보 집합이 주어졌을 때, 해당 후보 집합을 우선적으로 활용하여 제한된 전송 예산 내에서 프리패칭 순서를 결정하는 경량 우선순위 기법을 제안한다. 제안 기법은 현재 시청 비디오와 프리패칭 대상 비디오 간의 의미 유사도, 프리패칭 대상 비디오의 시청 효용, 첫 재생 가능 세그먼트 크기를 함께 고려하여 단위 데이터 크기 대비 기대 효용이 높은 비디오를 우선 선택한다. 공개 마이크로 비디오 데이터셋 기반 시뮬레이션 결과, 제안 기법은 16-128MB 버퍼 제약 및 변동 대역폭 환경에서 기존 방식 대비 1.07-2.90배 높은 적중률을 보였다. 이는 후보 집합이 주어진 이후에도 현재 시청 맥락과 자원 제약을 함께 고려한 프리패칭 우선순위 결정이 초기 재생 가능성 향상에 중요함을 보여준다.

Short-form video services require low startup latency under rapid swiping interactions. Prefetching can reduce such delay, but unnecessary transfers may waste resources when bandwidth and client buffer capacity are limited. This paper proposes a lightweight prefetch prioritization method that determines the prefetch order under a limited transmission budget by prioritizing a candidate set generated by a recommendation or retrieval model. The proposed method prioritizes videos with high expected utility per unit data size by considering contextual similarity to the currently watched video, viewing utility, and first playable segment size. Simulation results using a public micro-video dataset show that the proposed method achieves a 1.07-2.90× higher hit rate than existing methods under 16-128 MB buffer constraints and fluctuating bandwidth. These results show that context- and resource-aware prefetch prioritization improves initial playback availability even after a candidate set is provided.

4

본 논문은 VLC 기반의 지능형 교통시스템(ITS) 개발을 위한 신호 송수신 링크에서 잡음으로 작용하는 주변광을 분석하기 위해 도심 내 도로 위의 주요 광원을 측정하여 스펙트럼 분포 특성을 분석하고, 이를 고려하여 물리적 상황에 따른 시스템 측면의 파장 선택 기준을 제공한다. 스펙트로미터를 이용하여 저조도 환경인 저녁 시간에 도로의 주요 광원에 대한 스펙트럼 측정을 하여, 8가지의 물리적 상황들에서 주변광 신호에 대한 광스펙트럼 파장 분석을 수행하고, 각 상황에서 파장별로 통신링크 구성에 고려해야 하는 정도를 설명한다. 이를 활용하여, 통신 시나리오를 세우고 각 시나리오에 정량화된 수치를 바탕으로 파장 선택 지침을 제공한다. 이러한 파장 선택 지침을 통해, ITS 시스템의 통신 성능을 확보하기 위한 기초 시스템 및 환경 분류와 파장 선택 기능을 담당하는 AI 모델 개발에 활용이 가능할 것으로 기대한다.

This paper analyzes ambient light that acts as optical noise in signal transmission and reception links for the development of visible light communication(VLC)-based intelligent transport systems (ITS). To this end, major light sources on urban roads are measured, and their spectral distribution characteristics are analyzed to provide system-level wavelength selection criteria according to different physical scenarios. Using a spectrometer, spectral measurements of major roadway light sources are conducted during evening hours under low-illuminance conditions. The wavelength characteristics of ambient-light spectra are analyzed for eight physical cases, and the relative importance of each wavelength range in communication-link design is discussed. Based on these results, communication scenarios are established, and wavelength-selection guidelines are proposed for each scenario using quantitatively derived values. These wavelength selection guidelines are expected to be applicable to developing an AI model responsible for basic system and environmental classification and wavelength selection, thereby ensuring the communication performance of ITS systems.

5

임베디드 시스템은 비정상적인 전원 차단이나 저장장치 오류로 인해 Boot Image가 손상되거나 부팅 실패가 반복 될 수 있으며, 이는 시스템의 가용성과 운용 신뢰성을 저하시키는 원인이 된다. 기존 Bootloader는 Main Image의 무결성 검증과 Backup Image 기반 부팅 기능을 제공하지만, 현재 Image의 검증 결과를 중심으로 부트 절차를 결정하므로 일시적인 부트 실패와 반복적인 부트 실패를 구분하여 Recovery 수행 시점을 제어하는 데 한계가 있다. 본 논문은 이전 Boot Failure History를 Boot Fail Count로 관리하고, Image 검증 결과와 누적된 실패 이력을 기반으로 Recovery 수행 여부를 결정하는 Boot Policy 기반 Fail-Safe Boot 기법을 제안한다. Main Image를 우선 검증하고 사용할 수 없는 경우 Backup Image를 검증하며, 두 Image를 통해 정상적인 시스템 부팅을 완료하지 못했을 때 Boot Fail Count를 증가시킨다. 누적된 Count가 설정된 Threshold에 도달하면 반복적인 부트 실패로 판단하여 Recovery를 수행한다. 제안 기법의 차별점은 Backup Image를 이용한 부팅 기능이 아니라, 현재 Image 상태와 이전 Boot Failure History를 함께 고려하여 Recovery 진입 시점을 정책적으로 결정하는 데 있다. 제안한 Boot Policy의 동작 검증을 위해 Zephyr RTOS 기반 Boot Simulator를 구현하고 QEMU Cortex-M3 환경에서 정상 부팅, Power Loss로 인해 발생할 수 있는 Boot Failure, Main Image CRC Error 및 반복적인 Boot Failure 조건을 시험하였다. 시험 결과 Main Image와 Backup Image의 검증 및 선택, Boot Fail Count 증가, Threshold 판단, Recovery 수행과 Count 초기화 과정이 설계된 절차에 따라 동작함을 확인하였다. 특히 반복적인 Boot Failure 조건에서는 매 실패마다 Recovery를 수행하는 즉시 Recovery 방식과 달리, 설정된 Threshold에 도달한 경우에만 Recovery가 수행되었다. 제안 기법은 Boot Failure History를 Recovery Decision에 반영함으로써 단발성 오류와 반복적인 오류를 구분하고 Recovery 수행 시점을 제어할 수 있다.

Embedded systems may experience boot image corruption and repeated boot failures due to unexpected power loss or storage device errors, which can reduce system availability and operational reliability. Conventional bootloaders generally provide Main Image integrity verification and Backup Image-based booting. However, boot procedures determined primarily by the current image validation results have limitations in distinguishing temporary boot failures from repeated failures and controlling the timing of recovery accordingly. This paper proposes a Boot Policy-based Fail-Safe Boot method that manages previous boot failure history using a Boot Fail Count and determines recovery execution based on both image validation results and accumulated failure history. The Main Image is validated first, followed by the Backup Image when the Main Image is unavailable. The Boot Fail Count is increased when a normal system boot cannot be completed using either image. Once the accumulated count reaches a predefined threshold, the failure is regarded as a repeated boot failure and recovery is performed. The key distinction lies not in Backup Image-based booting itself, but in the policy-based determination of recovery timing by considering both the current image state and previous boot failure history. To verify the operation of the proposed Boot Policy, a Zephyr RTOS-based Boot Simulator was implemented and evaluated in a QEMU Cortex-M3 environment under normal boot, boot failure conditions that may result from unexpected power loss, Main Image CRC errors, and repeated boot failures. The results confirmed that Main and Backup Image validation and selection, Boot Fail Count increments, threshold evaluation, recovery execution, and count initialization operated according to the designed procedure. Under repeated boot failure conditions, recovery was performed only when the predefined threshold was reached, unlike the immediate recovery method that performs recovery for each boot failure. The proposed method can distinguish isolated failures from repeated failures by incorporating boot failure history into the recovery decision and can control the timing of recovery accordingly.

6

무인지상차량(UGV)은 유무인 복합전투체계의 핵심 무기체계로, 무선 통신·다중 센서·CAN 기반 차량 제어 등 다양한 구성품과의 인터페이스를 보유하여 넓은 공격 표면에 노출되어 있으며, 사이버 공격에 의한 임무 실패는 전장에서 치명적인 결과를 초래할 수 있다. 기존의 공격 모델링 연구는 네트워크·시스템 수준의 취약점 분석에 집중되어 공격효과를 작전적 임무 영향으로 연결하지 못하는 한계가 있다. 본 논문은 실제 무기체계에 대한 모의침투의 위험 없이 UGV의 사이버 레질리언스를 정량적으로 평가하기 위한, 사이버트윈(Cyber Twin) 환경에서 동작하는 계층적 공격 모델링 프레임워크를 제안한다. 제안 방법은 임무-과업-기능-자산의 4계층 M&S 아키텍처에 사이버 공격·방어 모델을 결합하여, 공격 액션이 자산 계층의 사이버 속성을 변화시키고 그 효과가 기능·과업을 거쳐 임무 수준으로 상향전파되는 과정을 분석한다. 이를 위해 계층 간 영향 전파 규칙과 임무 수준의 레질리언스 지표(견딤·회복)를 정의하고, 공격 모델을 공격 관리 및 공격 실행의 2-tier 구조와 액션 실행 6단계 절차로 설계한다. 초기 침투부터 기동 제어 상실·경로 이탈에 이르는 다단계 공격 시나리오를 통해 제안 프레임워크의 적용 가능성을 보인다. 본 논문은 실험적 검증에 앞선 개념설계로서, 사이버트윈 실험환경 구축과 지표 산출·비교 실험은 향후 과제로 남긴다.

Unmanned ground vehicles (UGVs) are core weapon systems of manned-unmanned teaming and, with numerous cyber interfaces such as wireless communication, multi-sensor processing, and CAN-based vehicle control, are exposed to a broad attack surface, where a mission failure caused by a cyberattack can lead to fatal consequences on the battlefield. However, existing attack modeling studies focus on vulnerability analysis at the network and system levels and thus fail to connect attack effects to operational mission impact. This paper proposes a hierarchical attack modeling framework, operating in a cyber twin environment, that quantitatively evaluates the cyber resilience of a UGV without the risk of penetration testing on real weapon systems. The proposed method couples attack and defense models with a four-layer mission-task-function-asset M&S architecture, so that an attack action changes the cyber attributes of the asset layer and its effect propagates upward through the function and task layers to the mission level. To this end, we define inter-layer impact-propagation rules and mission-level resilience metrics (withstand and recover), and design the attack model as a two-tier attack management and execution structure with a six-step action execution procedure that leverages an ATT&CK-based TTP database. The applicability of the framework is illustrated through a multi-step attack scenario ranging from initial intrusion to loss of maneuver control and path deviation. This work is a conceptual design; building a cyber twin testbed and producing quantitative resilience results are left for future work.

7

본 논문은 단안 블랙박스 영상에서 도로 구조물의 위치 변화를 이용해 자차 및 타차 속도를 추정하고, V2X 정보로 이를 보정하는 방법을 제안한다. YOLOv8-Seg와 SegFormer로 차량과 표지판·가로등 등 도로 구조물을 검출·분할하고, 연속 프레임 간 구조물 기준점의 수직 위치 변화량(Δ)으로 자차 속도를 추정한 뒤, 회귀 모델로 주변 차량의 절대 속도를 추정한다. 속도 정답(Ground Truth)은 광학 흐름 없이 KITTI Raw Dataset의 GPS·관성 센서 정보로부터 자동 생성되며, 추정 결과는 ETSI CAM 기반 V2X 메시지로 주변 차량과 노변 단말에 공유되어 회귀 보정에 활용된다. 실험 결과, 자차 속도 추정은 평균 절대 오차 3.12 km/h, 평균 제곱근 오차 5.09 km/h, 타차 속도 추정은 평균 절대 오차 2.92 km/h, 평균 제곱근 오차 4.70 km/h를 보였으며, V2X 기반 보정을 적용하면 각각 평균 절대 오차 2.04 km/h·2.49 km/h, 평균 제곱근 오차 2.6 km/h·3.9 km/h로 오차가 감소하였다. 또한 제안 파이프라인의 프레임당 처리 시간은 27.3 ms(약 36.7 fps)로, 30 fps 블랙박스 영상의 실시간 처리가 가능함을 확인하였다.

This paper proposes a method that estimates ego-vehicle and surrounding-vehicle speeds from the positional changes of roadside structures in monocular dashcam videos and corrects them using V2X information. Vehicles and roadside structures such as traffic signs and streetlights are detected and segmented by YOLOv8-Seg and SegFormer, the ego-vehicle speed is estimated from the vertical displacement (Δ) of structure reference points across consecutive frames, and the absolute speed of surrounding vehicles is then estimated by a regression model. Speed ground truth is generated automatically from the GPS and inertial sensor data of the KITTI Raw Dataset without optical flow, and the estimates are shared with nearby vehicles and roadside units via ETSI Cooperative Awareness Messages (CAMs) for regression-based correction. Experimental results show that the proposed method achieves a mean absolute error (MAE) of 3.12 km/h and a root mean square error (RMSE) of 5.09 km/h for ego-vehicle speed and 2.92 km/h and 4.70 km/h for surrounding-vehicle speed, which are reduced to 2.04 and 2.49 km/h MAE and 2.6 and 3.9 km/h RMSE, respectively, when V2X-based correction is applied. The proposed pipeline achieves a per-frame processing time of 27.3 ms (approximately 36.7 fps), confirming real-time operation for 30 fps dashcam video.

8

최근 육상 양식 산업은 시설 자동화 및 실시간 모니터링 기술 도입을 통해 스마트 양식으로 전환되고 있다. 이에 따라 양식 현장에서 발생하는 방대한 시계열 데이터를 활용한 딥러닝 기반의 정밀 관리 연구가 활발히 진행 중이다. 본 연구에서는 육상 양식장에서 수집된 수질 환경, 어류 생육 데이터, 급이 데이터를 통합하여 LSTM(Long Short-Term Memory) 기반의 예측 모델을 설계하고 그 성능을 검증하였다. 분석 결과, 제안된 모델은 예측치와 실제치 간의 오차를 최소화하여 높은 정밀도를 확보하였으며, 통계적 검증을 통해 양식 환경 예측의 유효성을 입증하였다. 본 연구의 결과는 향후 양식 운영의 지능화 및 실무 적용 가능성을 높이는 기초 자료로 활용될 것으로 기대된다.

In recent years, the land-based aquaculture industry has been transitioning toward smart aquaculture through the integration of facility automation and real-time monitoring technologies. Consequently, research on deep learning-based precision management utilizing extensive time-series data generated from aquaculture sites is being actively conducted. This study developed and evaluated a Long Short-Term Memory (LSTM)-based prediction model by integrating water quality parameters, fish growth data, and feeding records collected from a land-based aquaculture farm. The experimental results demonstrate that the proposed model achieved high precision by minimizing the error between predicted and actual values. Furthermore, the validity of the model in predicting the aquaculture environment was statistically verified. These findings are expected to serve as a foundational resource for enhancing the intelligence of aquaculture operations and improving their practical applicability in the field.

9

최근 저고도 공역에서 무인항공기(UAV)의 활용이 증가함에 따라 UAV의 위치와 거리 정보를 안정적으로 파악하기 위한 멀티센서 기반 인식 기술의 중요성이 높아지고 있다. 본 연구에서는 실제 환경에서 수집된 MMAUD 데이터셋을 이용하여 LiDAR와 Radar의 거리 구간별 분류 성능을 분석하고, 두 센서 정보를 결합한 시계열 기반 멀티센서 융합 모델의 성능을 비교하였다. UAV와 센서 사이의 3차원 거리를 기준으로 네 개의 거리 구간을 정의하고, LiDAR-only, Radar-only 및 LiDAR-Radar fusion 모델을 동일한 조건에서 학습하고 평가하였다. 또한 연속 비행 데이터의 시간적 상관관계를 고려하기 위해 temporal block 기반 데이터 분할과 GRU 기반 시계열 모델을 적용하였다. 실험 결과, LiDAR와 Radar는 거리 구간에 따라 상이한 성능 특성을 나타냈으며, LiDAR-Radar 융합 모델은 Overall Accuracy와, Macro Accuracy에서 상대적으로 높은 성능을 보였다. 특히 20m 미만의 거리구간에서 융합 모델은 단일 센서 모델보다 높은 분류 정확도를 나타내어 두 센서의 상호보완 가능성을 확인하였다.

With the recent increase in the use of Unmanned Aerial Vehicles (UAVs) in low-altitude airspace, the importance of multi-sensor-based recognition technology for reliably determining UAV location and distance information is growing. In this paper, we analyzed the classification performance of LiDAR and Radar across different distance ranges using the MMAUD dataset collected from real-world environments, and compared the performance of a time-series-based multi-sensor fusion model combining the two sensor data. Four distance ranges were defined based on the threedimensional distance between the UAV and the sensors, and LiDAR-only, Radar-only, and LiDARRadar fusion models were trained and evaluated under identical conditions. Additionally, temporal block-based data segmentation and a GRU-based time-series model were applied to account for the temporal correlation of continuous flight data. Experimental results showed that LiDAR and Radar exhibited different performance characteristics depending on the distance range, while the LiDARRadar fusion model demonstrated relatively high performance in both Overall Accuracy and Macro Accuracy. In particular, for distance ranges of less than 20m, the fusion model showed higher classification accuracy than the single-sensor model, confirming the potential for mutual complementarity between the two sensors.

10

전동 청소장비의 정비 매뉴얼은 도면과 부품표의 비중이 높고, 부품 번호와 모델명 같은 코드형 토큰이 답을 좌우한다. 이러한 토큰은 밀집 벡터 공간에서 서로 뭉쳐 유사한 코드가 적힌 다른 페이지를 불러오기 때문에, 의미 검색만으로 구성한 RAG 시스템은 근거 페이지를 찾지 못하는 경우가 많다. 본 논문은 선행 연구에서 설계한 매뉴얼 질의 응답 시스템을 온프레미스 스택으로 구현하고, 스캔본 문서의 OCR 보강, BM25 어휘 검색과 밀집 벡터 검색의 역순위 융합(RRF), 교차 인코더 재정렬을 차례로 도입하여 각 단계의 기여도를 정량 측정하였다. 자동 생성 후 규칙과 LLM으로 이중 검수한 67문항 평가셋(답 있음 55문항)을 대상으로 검색지표를 산출한 결과, 정답 페이지 포함률(Hit@10)은 벡터 단독 43.6%에서 하이브리드 78.2%, 재정렬 적용 시 87.3%로 향상되었고, 평균 역순위는 0.343에서 0.698로 개선되었다.

Maintenance manuals for electric cleaning equipment are dominated by drawings and parts tables, and the correct answer often hinges on code-like rare tokens such as part numbers and model names. Because such tokens collapse together in a dense embedding space, a purely semantic RAG system frequently retrieves an incorrect page that merely contains a similar code. This paper implements the manual-based question-answering system designed in our previous work on a fully on-premises stack, and incrementally introduces OCR recovery of scanned documents, reciprocal rank fusion of BM25 lexical retrieval with dense vector retrieval, and cross-encoder re-ranking, measuring the contribution of each stage. On a 67-item evaluation set (55 answerable items) that was automatically generated and then double-screened by rules and an LLM, retrieval metrics showed that the page-level hit rate (Hit@10) improved from 43.6% for dense-only retrieval to 78.2% with hybrid retrieval and 87.3% with re-ranking, while the mean reciprocal rank improved from 0.343 to 0.698.

11

서비스 메시는 클라우드 네이티브 마이크로서비스 환경에서 트래픽 관리 및 관측 기능을 제공하지만, 정적 또는 규칙 기반 트래픽 정책은 변화하는 서비스 상태에 효과적으로 적응하기 어렵다. 본 논문에서는 Istio 서비스 메시에서 적응형 트래픽 정책 최적화를 수행하기 위한 심층 Q-네트워크(Deep Q-Network, DQN) 기반 프레임워크를 제안한다. 제안 프레임워크는 Prometheus를 통해 수집한 런타임 서비스 메트릭을 이용하여 서비스 메시의 상태를 구성하고, 부하 분산, 연결 풀링 및 서킷 브레이킹을 결합한 Istio 트래픽 정책 구성을 동적으로 선택한다. 제안 프레임워크는 Kubernetes 환경에서 Istio Bookinfo 애플리케이션을 기반으로 구현하였으며, 정적 Istio 정책(Static Istio) 및 규칙 기반 제어기(Rule-Based Controller)와 비교하여 성능을 평가하였다. 실험 결과, 제안한 DQN 기반 제어기는 평가 대상 제어기 중 가장 낮은 평균 P50 지연시간, 가장 높은 요청률(request rate), 가장 낮은 성능비용 및 가장 높은 평균 보상을 나타냈다. 반면, 기준 제어기보다 높은 P95 지연시간을 보여 꼬리 지연시간(tail latency) 측면에서 성능 상충관계가 존재함을 확인하였다. 이러한 결과는 DQN 기반 적응형 트래픽 정책 최적화가 서비스 메시 환경에서 여러 성능 목표를 종합적으로 고려한 효과적인 운영점을 도출할 수 있음을 보여준다.

Service meshes provide traffic-management and observability for cloud-native microservices; however, static or rule-based traffic policies may not adapt effectively to changing service conditions. This paper proposes a Deep Q-Network (DQN)-based framework for adaptive traffic-policy optimization in Istio service meshes. The framework uses runtime service metrics collected through Prometheus to construct the service-mesh state and dynamically selects Istio traffic-policy configurations combining load balancing, connection pooling, and circuit breaking. The proposed framework is implemented on Kubernetes using the Istio Bookinfo application and evaluated against Static Istio and a Rule-Based Controller. Experimental results show that the Proposed DQN achieves the lowest average P50 latency, highest request rate, lowest performance cost, and highest average reward among the evaluated controllers. However, it exhibits higher P95 latency than the baseline controllers, indicating a trade-off in tail-latency performance. These results demonstrate the potential of DQN-based adaptive traffic-policy optimization to achieve a favorable multi-objective operating point in service-mesh environments.

12

본 연구는 확장현실(Extended Reality, XR) 기반 지뢰 교육훈련체계에서 M14 훈련용 목업장비와 햅틱 장구류를 연동하기 위한 SW 아키텍처를 제안한다. 기존 지뢰 교육훈련은 안전사고 위험, 훈련장 제약, 장비 소모 및 반복숙달의 한계가 있어 실물 훈련 전 단계에서 목업장비와 XR 가상환경을 활용한 사전학습이 필요하다[1-3]. 본 연구에서는 M14 목업장비, 햅틱글러브, 모션·충격센서 슈트, 혼합현실 헤드마운트 디스플레이(Mixed Reality Head-Mounted Display, MR HMD) 및 사후강평(After-Action Review, AAR) 평가 모듈을 연동하는 구조를 설계하였다. 제안 구조는 목업장비 상태 인식, 손동작 기반 햅틱 피드백, 슈트 기반 자세·오류 반응, MR HMD 패스스루 가시화 및 훈련 로그 기반 사후강평을 포함한다[4-10,18-21]. 예비평가는 개발업체 관계자 10명, 한밭대학교 학생 15명, 군 및 정부기관 관계자 5명 등 총 30명을 대상으로 구성하였다. 평가 결과, M14 목업장비 조작정확도는 68.3%에서 91.7%로 증가하였고, 평균 과제 수행시간과 절차 오류 횟수는 감소하였다. 본 연구는 실제지뢰 운용절차가 아니라 안전한 목업장비 기반 XR 연동 구조의 적용 가능성을 확인하는 예비 연구로 한정한다.

This study proposes a software architecture for integrating an M14 training mock-up device and haptic gear in an Extended Reality(XR)-based mine training system. Conventional mine training involves safety risks, limitations in training areas, equipment wear, and constraints on repeated practice. Therefore, pre-training using mock-up equipment and an XR-based virtual environment is needed before field training. The proposed architecture integrates an M14 mock-up device, a haptic glove, a motion and impact sensing suit, a Mixed Reality Head-Mounted Display(MR HMD), and an After-Action Review(AAR) evaluation module. It supports mock-up device state recognition, hand-motion-based haptic feedback, posture and error-response sensing through the suit, MR HMD passthrough visualization, and log-based post-training review. A preliminary evaluation was conducted with 30 participants: 10 personnel from the development company, 15 students from Hanbat National University, and 5 military or government personnel. The evaluation results showed that M14 mock-up handling accuracy increased from 68.3% to 91.7%, while mean task completion time and procedural error count decreased. This study does not validate actual mine operation procedures; rather, it is a preliminary study examining the feasibility of an XR integration architecture based on safe training mock-up equipment.

13

대화형 AI 답변 엔진의 확산으로 정보 탐색 패러다임이 검색엔진 최적화(SEO)에서 답변엔진 최적화(AEO)로 전환되고 있으나, 수의(동물의료) 도메인에 대응하는 체계적 AEO 설계 연구는 부재하다. 본 연구는 설계과학(Design Science) 방법론에 기반하여 반려인의 검색 의도를 4유형으로 분류하고, 로컬 동물병원의 AI 비가시성(AI Invisibility) 원인을 플랫폼·구조·콘텐츠 3계층 6요인으로 체계화한 후, 이를 해소하기 위한 4모듈 통합 프레임워크(M1~M4)를 설계하였다. 지엔동물병원의 블로그 포스팅 47건과 유입 키워드 67건을 분석 자료로 삼아, 3개 AI 플랫폼 대상 표준 질의 진단(플랫폼당 N=30, 총 90개 응답)에서 직접 URL 인용 부재(0%)를 확인하였고, 두 조건의 본문 텍스트를 동일하게 유지하고 구조를 달리한 RAG 검색 A/B 시뮬레이션(질의 24개, 검색기 2종)에서는 M1·M3 결합 구조가 검색 단계에서 문자 수준 F1@3을 39.8~44.6% 상대적으로 개선하고(p<0.001), 전달 컨텍스트를 45.5% 절감함을 확인하였다. 본 연구는 로컬 의료기관의 AI 비가시성을 진단 가능한 구조적 문제로 정식화하고 제안 구조의 검색 단계(retrieval stage) 유효성을 확인함으로써, 소규모 의료기관이 AI 검색 환경에서 가시성을 확보하기 위한 참조 설계를 제공한다. 실제 AI 플랫폼 인용률의 개선과 M2·M4의 실증은 후속 과제로 남긴다.

The rise of conversational AI answer engines is shifting information retrieval from SEO to Answer Engine Optimization(AEO), yet systematic AEO design research for veterinary healthcare remains absent. Based on Design Science methodology, this study classifies pet owners’ search intent into four types, systematizes the causes of AI Invisibility in local veterinary hospitals into six factors across three layers(platform, structure, content), and designs a four-module integrated framework(M1–M4). Using 47 blog posts and 67 inflow keywords from GN Animal Hospital, a standard query diagnosis using 30 queries per platform(90 responses in total) confirmed zero direct URL citations, and an A/B retrieval simulation holding body text constant while varying only structure (24 queries, two retrievers) showed that the combined M1 and M3 structure improved characterlevel F1@3 by 39.8–44.6%(p<0.001) and reduced delivered context by 45.5% at the retrieval stage. The study formalizes AI invisibility as a diagnosable structural problem and confirms the retrieval-stage validity of the proposed structure, providing a reference design for small local healthcare providers. Improvement in actual AI platform citation rates and empirical validation of M2 and M4 remain for future work.

14

전술 네트워크는 제한된 대역폭, 적의 재밍에 의한 단절 및 지형 지물 간섭, 기동 등의 원인에 따라 동적으로 변화하는 토폴로지 등 다양한 제약 조건을 갖는 DIL(Disconnected, Intermittent, Limited) 환경에서 운용된다. 이러한 환경에서도 유연하게 적용할 수 있는 SDN(Software Defined Networking) 기반 INT(In-band Network Telemetry)는 네트워크 상태를 실시간으로 모니터링하기 위한 후보 기술 중 하나로 대두되고 있다. 그러나 안정된 유선 환경에서 운용되는 기존 INT 시스템은 스위치 내부의 텔레메트리 상태 관리를 위해 블룸필터를 사용하며, 이는 전술 네트워크에서 삭제 불가능성과 충돌로 인한 false positive 문제를 야기한다. 본 논문은 블룸필터 대신 쿠쿠필터를 적용하여 DIL 환경의 이동성과 동적 토폴로지 변화에도 INT 손실을 최소화하여 전달하는 방법을 제안한다.

Tactical networks operate under harsh Disconnected, Intermittent, and Limited(DIL) conditions characterized by limited bandwidth, communication disruptions caused by adversarial jamming and terrain-induced interference, and dynamically changing topologies resulting from node mobility. In such environments, Software-Defined Networking (SDN)-based In-band Network Telemetry(INT) has emerged as a key technology for real-time monitoring of network conditions. However, conventional INT systems designed for stable wired environments employ Bloom Filters to manage telemetry states within switches, which can cause false positives in tactical networks due to the inability to delete entries and hash collisions. This paper proposes an INT delivery method that employs a Cuckoo Filter instead of a Bloom Filter to minimize INT loss even in the presence of node mobility and dynamic topology changes in DIL environments.

기술소개

15

본 기술은 정부(과학기술정보통신부)의 재원으로 정보통신기획평가원의 지원을 받아 수행 중인연구로 “자율행동체를 위한 온디바이스 자연어 처리 고속 작업 명세 생성 기술 개발(RS-2026-25520654)”에 관한 것이다.

게시판

 
페이지 저장