Earticle

현재 위치 Home

UAV 거리 구간 분류를 위한 LiDAR와 Radar의 성능 분석 및 멀티센서 융합
Performance Analysis of LiDAR and Radar and Multi-sensor Fusion for UAV Range Classification

첫 페이지 보기
  • 발행기관
    한국차세대컴퓨팅학회 바로가기
  • 간행물
    한국차세대컴퓨팅학회 논문지 KCI 등재 바로가기
  • 통권
    Vol.22 No.5 (2026.10)바로가기
  • 페이지
    pp.115-125
  • 저자
    임승호
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A494474

원문정보

초록

영어
With the recent increase in the use of Unmanned Aerial Vehicles (UAVs) in low-altitude airspace, the importance of multi-sensor-based recognition technology for reliably determining UAV location and distance information is growing. In this paper, we analyzed the classification performance of LiDAR and Radar across different distance ranges using the MMAUD dataset collected from real-world environments, and compared the performance of a time-series-based multi-sensor fusion model combining the two sensor data. Four distance ranges were defined based on the threedimensional distance between the UAV and the sensors, and LiDAR-only, Radar-only, and LiDARRadar fusion models were trained and evaluated under identical conditions. Additionally, temporal block-based data segmentation and a GRU-based time-series model were applied to account for the temporal correlation of continuous flight data. Experimental results showed that LiDAR and Radar exhibited different performance characteristics depending on the distance range, while the LiDARRadar fusion model demonstrated relatively high performance in both Overall Accuracy and Macro Accuracy. In particular, for distance ranges of less than 20m, the fusion model showed higher classification accuracy than the single-sensor model, confirming the potential for mutual complementarity between the two sensors.
한국어
최근 저고도 공역에서 무인항공기(UAV)의 활용이 증가함에 따라 UAV의 위치와 거리 정보를 안정적으로 파악하기 위한 멀티센서 기반 인식 기술의 중요성이 높아지고 있다. 본 연구에서는 실제 환경에서 수집된 MMAUD 데이터셋을 이용하여 LiDAR와 Radar의 거리 구간별 분류 성능을 분석하고, 두 센서 정보를 결합한 시계열 기반 멀티센서 융합 모델의 성능을 비교하였다. UAV와 센서 사이의 3차원 거리를 기준으로 네 개의 거리 구간을 정의하고, LiDAR-only, Radar-only 및 LiDAR-Radar fusion 모델을 동일한 조건에서 학습하고 평가하였다. 또한 연속 비행 데이터의 시간적 상관관계를 고려하기 위해 temporal block 기반 데이터 분할과 GRU 기반 시계열 모델을 적용하였다. 실험 결과, LiDAR와 Radar는 거리 구간에 따라 상이한 성능 특성을 나타냈으며, LiDAR-Radar 융합 모델은 Overall Accuracy와, Macro Accuracy에서 상대적으로 높은 성능을 보였다. 특히 20m 미만의 거리구간에서 융합 모델은 단일 센서 모델보다 높은 분류 정확도를 나타내어 두 센서의 상호보완 가능성을 확인하였다.

목차

요약
Abstract
1. 서론
2. 관련 연구
2.1 UAV 인식 및 멀티모달 데이터셋
2.2 LiDAR-Radar 기반 멀티센서 융합
3. LiDAR-Radar 멀티센서 기반 거리구간 인식 모델
3.1 데이터셋 및 전처리
3.2 시계열 데이터 구성 및 데이터 분할
3.3 센서별 특징 추출 및 시계열 융합 모델
3.4 학습 및 평가 방법
4. 실험 결과
4.1 실험 환경
4.2 학습 결과 및 성능 분석
5. 결론
Acknowledgement
참고문헌

저자

  • 임승호 [ Seung-Ho Lim | 한국외국어대학교 컴퓨터공학부 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국차세대컴퓨팅학회 [Korean Institute of Next Generation Computing]
  • 설립연도
    2005
  • 분야
    공학>컴퓨터학
  • 소개
    본 학회는 차세대 PC 및 그 관련분야의 학술활동을 통하여 차세대 PC의 학문 및 기술발전을 도모하고 산업발전 및 국제협력 증진을 목적으로 한다.

간행물

  • 간행물명
    한국차세대컴퓨팅학회 논문지 [THE JOURNAL OF KOREAN INSTITUTE OF NEXT GENERATION COMPUTING]
  • 간기
    격월간
  • pISSN
    1975-681X
  • 수록기간
    2005~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 566 DDC 004

이 권호 내 다른 논문 / 한국차세대컴퓨팅학회 논문지 Vol.22 No.5

    피인용수 : 0건 (자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장