2022 (262)
2021 (535)
2020 (580)
2019 (584)
2018 (591)
2017 (477)
2016 (159)
2015 (145)
2014 (41)
2013 (28)
2012 (20)
2011 (24)
2010 (11)
국민건강보험공단 건강검진에 대한 만족도 연구 - 부산시의 건강검진수검자를 대상 -
한국융합학회 한국융합학회논문지 제4권 제2호 2013.06 pp.1-8
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
이 연구는 최근 들어 국민소득이 늘어나고 생활수준이 향상됨에 따라 국민들의 의료에 따른 기대와 욕구의 증가로 인한 건강검진의 확실한 서비스가 필요로 되었으며 국민 입장에서 본 건강보험 공단의 건강검진에 대한 만족 도를 알아보기 위해서 시행하였다. 2013년 3월부터 6월까지 부산시의 건강검진 수검자를 대상으로 건강검진에 대한 만족도와 인식조사를 자기기입식 설문조사로 시행했으며, 총 300부중 221부를 SPSS를 사용하여 교차분석, T-test, Anova 분석을 시행하였다. 결과로는 일반적 특성에 따른 건강검진 이용유무, 1개월전 의료기관의 이용유무, 하루 담배 흡연량의 차이, 술을 마시는 횟수에서 통계적으로 유의하였다. 또한 검진기관 만족도는 3.22±0.52, 검진서비스 에 대한 의견은 3.31±0.55(5점 척도), 건강검진 태도는 3.73±0.54로 나타났다.
The purpose of this study was carried out to evaluate the satisfaction relate to health examination of National health insurance service in Busan. This paper provide basic information of conducted by the National Health Insurance service, and the perception of health examination to provide satisfaction. The sampling group was selected in Busan's health examinations tests can be conducted targeting. Distributed 300 questionnaires were used in the final paper, call 221 and survey was accomplished between March and th June in 2013. The analyzed results was as followed; 1) There was significant of have used medical examinations; have medical institutions use 1 month ago; cigarette smoking day; the number of drinking by demographic characteristics, the statistic difference was existed on.(p<0.05, p<0.01) 2) The satisfaction of health examination institutions were recorded to average 3.22± 0.52 points on 5-points scale; Opinion the health examination services average was 3.31± 0.55 points on 5-points scale; attitude to health examination average was 3.73± 0.54 points on 5-points scale.
4,000원
전처치 방법을 개선하여 환자에게 적정량의 하제를 복용케하고, 주의사항 및 복용 방법과 시간을 체계적으 로 교육하여 보다 정확한 실천 방법을 주지시킴으로써 대장 조영 촬영 검사의 효율적인 진단을 높이는데 있다. E대학 병원에 내원한 환자 중 첫째 총504명을 대상으로 재전처치 환자의 비율을 사전 조사하고 총176명을 대상으로 주의 사항을 변경하여 재전처치율을 조사하였고 둘째 하제의 종류와 양을 변화시키전 총130명과 변화시킨 후 총137명을 대상으로 조사하였다. 조영 촬영 검사시 주의사항 변경 후 재 전처치율을 약 10%정도 줄일 수 있었고, 개선된 하제량 복용 방법의 변화로 복통의 정도는21.8%로 감소하였고 개선된 하제량 복용 전후 본인이 생각하는 장 청결 정도는 개선후 매우 잘 된거 같다가 11.9% 증가하고 그저 그런거 같다는 16.3% 감소했다. 주의사항 내용을 환자에게 정확하 게 인식시켜 주는 방법만으로 재전처치율을 감소시키고 재전처치로 인한 환자의 불편과 고통이 감소된 결과를 얻을 수 있었고, 환자 본인이 생각하는 장 청결 정도가 좋아지므로 해서 정확한 검사에 대한 기대심리가 높아졌다.
This study which improve pretreatment method was to increase effective diagnosis of barium enema to remind a more accurate action by training precautions, method of taking medicine, time and taking suitable laxative to patient. First, A total of 504 patients who received barium enema in the E university hospital were evaluated about repretreatment proportion of patients. 176 patients who were changed with precaution were evaluated about repretreatment. Second, Both 130 patients who were not changed with the type and amount of laxative and 137 patients who were changed with it were evaluated. Repretreatment rate was reduced about 10% since changed precautions. Stomachache was reduced about 21% due to chage methode to take the laxative improved. Patients who think cleanliness degree of bowel increased that it is going very well about 11.9% since improvement and decreased that it's not bad about 16.3%. The methods which accurately recognize precautions to patient decrease repretreatment rate, inconvenience and pain of patients due to repretreatment. Expectation mentlity for accurate inspection also had increased in that patients think that cleanliness degree of bowel was increased.
4,000원
본 연구는 대형유통업체와 거래 관계에 있는 제조업체가 대형유통업체가 보유한 물류창고를 활용하는 데 에 따른 물류비용의 효율성을 측정하기 위한 요인들을 도출하는데 목적을 두고 있다. 대형유통업체와 거래를 하고 있는 제조업체가 물류 방식을 결정할 때 대형유통업체의 물류창고를 이용하거나 혹은 제조업체가 보유한 자체 물류 창고 및 이미 활용하고 있는 외주 물류창고를 이용할 수가 있다. 이 때 제조업체가 어떠한 물류창고를 이용하는가에 따라 물류비용의 효율성은 달라질 것이다. 또한 제조업체가 이용할 물류창고를 결정하게 하는 다양한 요인들이 있을 것이다. 이에 본 연구에서는 제조업체가 이용할 물류창고 결정 요인으로 제조업체와 유통업체 간의 시장지배력과 같은 영향력 변수로써 사업 환경의 불확실성의 정도, 제조업체가 보유한 역량, 제조업체와 대형유통업체의 거래 특성 요인들을 도출하였으며, 이들 요인은 물류창고 비용효율성을 측정할 수 있는 지표로 활용할 수 있을 것이다.
This study aims to determine factors related for manufacturers to use distributors storehouse and its cost efficiency in Supply Chain. When manufacturers which have relationships with Big distributors determine the way of their logistics, they can use their own warehouse, or the distributors’, or outsource its function. In which case the manufacturers face the cost efficiency of using warehouse will be different, therefore, the driven factors will exist internally or externally. The findings of this study are that internal factors(brand value, product portfolio, and technological capabilities), external factors(technological characteristics, demands fluctuations, and munificence), and transaction characteristics(transaction experiences, dependency) would be driven factor between manufacturer and distributors in supply chain. These driven factors effects manufacturers transactions power on their distributors..
4,000원
점용접은 자동차 산업에서 많이 사용되어지는데 조립공정의 자동화로 인하여 경제성과 차체 중량을 높이 지 않아 자동차 연비 개선효과가 있다. 그러나 차량 주행시 노면으로부터 불규칙적인 하중전달 및 진동으로 인하여 점 용접부에 응력집중이 발생하고 피로파괴가 종종 발생한다. 이에 대하여 강성변화를 고려한 점용접부의 피로수명 평가는 필수적이다. 본 논문에서는 선형정적해석을 수행하여 취약부위를 파악하였다. 점용접부의 피로특성을 획득하 였고, 시간영역에서 3단계의 하중이력을 도출하여, 준정적 피로해석에 조건으로 설정하여 수행하였다. 또한 점용접 부에 대한 피로수명예측 방법은 기존 방법과 피로누적으로 인한 손상방법을 적용하여 나타낸 결과를 가지고 비교분 석하였다.
Spot welding is automation of assembly process, without increasing the vehicle weight and economy, there is a fuel economy improvement of motor vehicles and to widely used in the automotive industry. But By irregular load from the road surface while at the vehicle is running, stress concentration occurs in the weld point, fatigue failure occurs frequently. Considering change of stiffness is the essential fatigue life of the evaluation spot weld. In this paper, by performing a linear static analysis was to understand the vulnerable part. Acquire to the fatigue properties of the spot weld, take the load history of the three levels in the time domain, was performed by setting as a condition of quasi-static fatigue analysis. and Fatigue life prediction method of the spot weld was by applying the method according to the fatigue damage accumulation and the conventional method was compared analyzed with the results shown.
4,000원
지난 2005년 부산의 한 초등학교에서 시작된 “스쿨폴리스”제도가 그 효과를 인정받아 전국의 초등학교에 적용 되고 있다. 하지만 스쿨폴리스 제도만으로는 부족한 인력을 확보하기 위해서 배움터지킴이 제도로 확대되었음에도 불구 하고 국내에서는 2010년과 2011년에 잊지 못할 충격적인 초등학생 자살사건이나 성폭력 사건들이 교내에서 발생하고 있는 실정이다. 이와 같이 초등학교에서 고학년이 되는 4학년부터 중학교 1학년 학생들의 범죄에 대한 노출과 자살, 집단 따돌림 등의 문제가 심각하게 발전하는 현실을 감안해 전 국가 차원의 문제 해결책이 반드시 필요하다. 하지만, 인력, 공간, 기술, 정서적으로 총체적인 해결책을 제시하여야 함에도 불구하고 지금까지는 개별적인 피해 학 생의 부모와 학생 당사자만의 문제로 여겨지고 사회에서 크게 관심을 얻지 못해 그 해결이 미온한 편이다. 그러므로 본 논문에서는 초등학생 범죄의 가장 큰 공간을 차지하는 학교 교실 내부에서 학생들이 자주 사용하는 스마트-폰의 특정 앱과 학교 내부의 홈페이지에 게시되는 글들을 분석하여 학생들이 집단 따돌림이나 자살, 폭력 사건 등이 발생 하기 전에 이를 학부모, 학내에 근무하는 배움터지킴이, 선생님에게 안내함으로써 사고를 미연에 방지할 수 있는 시시스템을 제안하고자 한다. 우리가 제안한 시스템은 안드로이드 기반의 스마트-폰에서 동작하도록 설계되었으며, 모바일 웹 기술을 접목하여 교내 홈페이지 게시판에 게시되는 글들에 대한 모니터링을 통해서 보다 학생들의 심리, 정신, 건강 상태 등에 대해서 알아볼 수 있도록 설계하였다.
From one elementary school of last 2005 Pusan was started “the school police” system is being applied the effect in the elementary school of the human nature receiving entire country. But “with school police system " have a limit about manpower that is insufficient. So we try to make “Baumter-Gikimy " that is extended scollo police in seoul. Despite being like that at 2010 and 2011 cannot forget the elementary student suicide events which are shocking or sexual assault events occur from the campus.From elementary school 4 grade the students between junior high school 1 grade crime occurrence ratio are highest. These people the group leaving out mainly, suicide, with group violence and sexual assault problem gets up same problems. In order to solve like this problems stands the countermeasure of the dimension which is national certainly is necessary. But so far only the damage student and the parents have an interest in about like this problems and they hurt. We the smart phone of Android bases it will be able to solve like this problem points [ayp] from under planning and development boil the elementary student safe helper it will can use. When it uses the elementary student safe helper system which we propose before the accident occurs, it will grasp the state information of the student and it will be able to prevent an accident in advance. We will try to more efficient safe guard to elementary school student by real-time monitoring skill soon.
Information Management by Data Quantification with FuzzyEntropy and Similarity Measure
한국융합학회 한국융합학회논문지 제4권 제2호 2013.06 pp.35-41
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
Data management with fuzzy entropy and similarity measure were discussed and verified by applying reliable data selection problem. Calculation of certainty or uncertainty for data, fuzzy entropy and similarity measure are designed and proved. Proposed fuzzy entropy and similarity are considered as dissimilarity measure and similarity measure, and the relation between two measures are explained through graphical illustration.Obtained measures are useful to the application of decision theory and mutual information analysis problem. Extension of data quantification results based on the proposed measures are applicable to the decision making and fuzzy game theory.
Design of Sliding Mode Controller with Auto-tuning Method
한국융합학회 한국융합학회논문지 제4권 제2호 2013.06 pp.43-50
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
Sliding mode control(SMC) are carried out in this literature. And to make the controllers perform better, fuzzy logic was chosen,it makes PID controller auto-tuning parameters and reduced the chattering problem of sliding mode control. Since SMC take error and derivative of error as inputs, after comparison some results are obtained.PID controller response faster yet sliding mode control is much steadier. However certain problems cannot be ignored that the chattering phenomenal cannot be reduced entirely and this motion may hurt the machine; this project only considered a simple system, there is no guarantee PID can work as well as in this case for a much more complex system. MATLAB simulink was the main approach to obtain the performance of the two controllers: to observe the control output of the two controllers, electric circuit and special controllers are designed and tested in MATLAB.
0개의 논문이 장바구니에 담겼습니다.
선택하신 파일을 압축중입니다.
잠시만 기다려 주십시오.