Earticle

This study was evaluated the indicators of GRI guideline LA6-LA9 for industrial safety sanitation field on 22 domestic sustainable management reports and 46 overseas reports published by companies in 2007 and 2008, was developed new indicators with emphasis on industrial safety sanitation act, and was assessed whether they are released. As a result, LA6(Percent of total workforce represented in formal joint management-work health and safety committees that help monitor and advise on occupational health and safety programs) was evaluated highest in release ratio on whether to release the reports by each indicator of industrial safety sanitation field using domestic sustainable management report GRI guideline, and in the case of overseas companies, it was evaluated that there is no companies that release all from LA6 through LA9 among GRI guideline, but it was grasped that the ratio of partial release is high. As for the release of indicators was developed with the use of industrial safety sanitation act of 22 domestic companies, the release of indicator No. 1(report and industrial disaster record) and 10(health diagnosis) of industrial safety sanitation act was high. This study is meaningful in that it analyzed the industrial safety sanitation field of sustainable management report(CSR) that has not been attempted so far with the use of new indicators developed with emphasis on GRI guideline and industrial safety sanitation act.

Steel and iron works have place many hazard or risk factor as a high temperature material, a high place, and so on. Accordingly, steel and iron works need system for risk assessment. In this paper, we development of risk assessment system for steel and iron works. In case study applied at the steel enterprise. The resultant, we can discovery that an human factor is an important question form risk assessment.

The object of this study is to understand the psychological factor of the worker on safety and recommend the experimental factor of safety education program. The following are the methods of this study. We analyzed the statistical data from survey to workers(N=139) about the psychological factor on safety. The survey consisted of 34 questions about 4 factors like private external characteristic, psychological characteristic, characteristics on behavior, and experience and reason of disaster. As the result of the analysis of the multi regression model on the base of correlation of each of the major factors, psychological health, effort on practicing, and satisfaction on their life were the variables with high influence on the safety mind of workers. So, it is good safety strategy for effective working to maintain healthy life with optimistic minds, and try to practice actively as usual. After considering the result, for the development of safety education program for working, we have to consider psychological factors of our workers that influence their safety and try to improve the experimental education opportunity, and it will be effective.

Since it's first adaptation in Germany in 1884, the industrial accident compensation insurance system has been on the most widely used social security systems, and in was first enforced in Korea in 1964. Today's society has been industrialized and number of business places for workers accident. As the welfare of workers improves in korea, the number of beneficiaries of industrial accident compensation insurance is increasing. Even though such trend is desirable in many respects, there is a growing social problem caused by abnormal insurance claims.

본 연구는 급수전('tap'과 'faucet'은 호환사용)의 종류에 따른 사용자의 조작방향에 대해 우리나라와 다른 나라의 문화적인 차이를 비교한 연구결과이다. 이를 위하여 우리들이 가정과 공공시설의 화장실이나 욕실 등에서 많이 사용하고 있는 냉 온수 일체형 레버형 손잡이 급수전과 냉 온수 분리형 손잡이 급수전을 선정하여 이의 열림 방향에 대한 스테레오타입을 파악하였다. 또한 본 실험결과와 다른 문화권의 자료를 비교하여 이의 차이를 규명함으로써 서로 다른 사용자들이 공감하는 설계방향에 대해 언급하였다. 국외 자료는 연구문헌을 참조하였으며 국내자료는 직접 10대에서 60대 이상까지 6개 연령계층의 남 여 50명씩 총 600명을 할당표본추출 방식으로 선정하여 실험을 통하여 수집하였다. 조사 결과는 각 항목별로 통합 자료, 성별, 연령별, 주손에 따라 빈도분석을 실시하였으며 카이제곱검정을 통해 성별, 연령계층별, 주손(hand dominance)별로 스테레오타입의 기대특성(expectation characteristics)에 대해 문헌을 통해 조사된 연구결과와 상호비교 분석하였다. 분석결과 우리나라 사람은 비교 분석된 다른 나라 사람과 같이 스테레오타입에 대한 통상적인(그러나 동일하진 않음) 문화적인 배경을 공유하고 있음을 알 수 있다. 본 연구결과는 급수전 손잡이 설계에 있어서 서로 다른 문화적인 배경에 따른 보편적 기대와 일치된 설계지침으로서 사용상의 편리성과 안전성을 향상시키는데 유용하게 이용될 수 있을 것이다.

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, the incidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that the difference between managers and workers are existing about safety awareness and knowledge. And, we confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor.

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. As a result, as for body part(neck), (waist) and (arms) the degree of risk of work posture measured with the use of job stress(KOSS), psycho-social stress(PWI-SF) and REBA is significantly more affected by fatigue than muscular skeletal disease related consciousness symptom. However, regarding bod(wrist), the degree of risk of work posture measured with the use of job stress(KOSS) and REBA is directly affected by muscular skeletal disease related consciousness symptom. This study is meaningful in that the study clarified the causal relations of the degree of risk of work posture, degree of fatigue, and muscular skeletal disease related consciousness symptoms by each body part measured with the use of work stress(KOSS), psycho-social stress(PWI-SF) and REBA.

The objective of this study is to develop 3D anthropometrical data acquisition method of human back surface and to recognise and extract its morphological characteristics. This technique is very useful in describing the sitter's back contour and the interaction between the sitter's back and the seat. The back surfaces of subjects in sitting posture are measured by using martine-type anthropometer and sliding gauge. These basic anthropometrical data are reconstructed into 3D image.

The purpose of this study was to examine the relative effectiveness of immediate feedback and informational prompt on safe sitting behaviors that may cause VDT syndromes. Participants were three white color workers and an ABCB within-subject design was adopted. Safety Posture System was developed specifically for the present study. The system could detect participants' unsafe sitting postures using sensors and provide feedback and prompt on the computer monitors. The results indicated that both immediate feedback and informational prompt considerably increased safe sitting behaviors. More importantly, the immediate feedback was more effective than the informational prompt in increasing safe sitting behaviors.

While musculoskeletal disorders increased, its prevention efforts were rather decreased or its operation was insufficient. This study aims to examine the actual conditions of musculoskeletal disorders at Electronics Company in Korea, analyze occupational danger factors related to musculoskeletal disorders through analysis of components of wrong workplaces and works, evaluate degree of danger of factors examined, analyze association between danger factors and musculoskeletal disorders, accumulate data of musculoskeletal disorders which are not enough in Korea and further prepare the foundation of improving working environment and developing prevention/management program of musculoskeletal disorders.

The study focuses on analysing situation of disasters and characteristics in construction process which the technical construction firms accomplish. Besides, the study aims at the role and responsibilities of technical construction firms in construction safety. It is found out by a questionnaire and interviews in this study that safety control and management have a key role to prevent accidents in construction projects. Based on the result of the research, it is concluded that institutional improvement and support strategies are suggested and that additional to the support of the government and institutions in charge of the field of construction safety the effort of the first contractor, the second contractor and the laborer it is also important.

In this study the real situation of apartment house in seoul is reproduced with multi-zone modeling program CONTAM2.4. This model include disinfection system which is consist of dilution, filtration, UVGI(ultra violet germicidal irradiation). It's energy consumption was also analyzed through the linked model of CONTAM and TRNSYS according to the combination of components. The comparison of total energy consumption through energy analysis revealed that adjusting the air change rate of the UVGI air sterilizer to maintain the same indoor microbe removal capability was more advantageous in terms of energy consumption.

We predict the earthquake rate in Korea following Bayesian approach. We make a model that can utilize the data to predict other levels of earthquake. An event tree model which is a frequently used graphical tool in describing accident initiation and escalation to more severe accident is transformed into an influence diagram model. Prior distributions for earthquake occurrence rate and probabilities to escalating to more severe earthquakes are assumed and likelihood of number of earthquake in a given period of time is assessed. And then posterior distributions are obtained based on observed data. We find that the minor level of earthquake is increasing while major level of earthquake is less likely.

The purpose of this study were to examine the effects of emotional dissonance on customer orientation and service delivery level, and to examine the mediating effects of the customer orientation. In order to verify the relationships and mediating effect, data were obtained from 199 nurses working in a general hospital in Changwon City were analyzed by using SPSS 12.0. and AMOS 5.0. The findings are as follows: Firstly, there was a negative relationship between emotional dissonance and customer orientation. Secondly, there was also a positive relationship between customer orientation and service delivery level. Thirdly, there was also a negative relationship between emotional dissonance and service delivery level. Finally, the customer orientation was a partial mediating effect on the relationship between emotional dissonance and service delivery level. Based on these findings, the implications and the limitations of the study were presented including some directions for future studies.

The present study is to investigate the effect of wave-structure interaction such as wave oscillation. The theoretical method is based upon the linear diffraction theory obtained by the boundary element method. The water depth and incident wave period in fluid region are assumed to be constant. To investigate the wave interaction due to offshore structures, the numerical program has been developed and the simulation has been carried out by varying the conditions of distance and width of offshore structures. This study can effectively be utilized for safety assessment to various breakwater systems and layout of offshore breakwater in the ocean and coastal field. It can give information for the safety to construct offshore structure and revetment in coastal region.

As a results of comparing with fire occurrences and gross national income(GNI), annual fire increasing rate has been 5.6%, and that of GNI has been 11% for the past 55 years. As GNI shows 5.4% higher than fire occurrences, economy growing rate is faster than that of fires. In addition, study has been done every 10 years from 1950's to 2000's. Fire occurrences increase twice as much annually and GNI increases above 3.3 times as much.

This study was conducted in search of the acceptance level of air traffic services from domestic airlines pilot's perspective in comparison with male controllers and female controllers. Pilots responded to the questionnaire that female ATC controllers are of significance to male controllers in terms of pronunciation, accuracy of English grammar, attitude and kindness. Besides, The ICAO aviation English proficiency level four test revealed that female controllers were found superior to male controllers in terms of rating scales of holistic descriptors.

Ubiquitous application is in need of high-level technology to meet various requests for ubiquitous service. In order to adopt ubiquitous technology in not only pilot projects but also regional services, many projects like u-City are implemented in and outside the country. RFID has been known as one of the important technology to provide with core benefits of Ubiquitous services. Because each band of RFID technology has merits and demerits concurrently, single-band RFID system has limitations for various RFID services. Thus, we developed dual-band RFID system enable to provide with 13.56MHz and 2.45GHz RFID service at the same time to compensate the shortage of single-band RFID system. Also we have considered the way that the firmware would control signals without collision, studied battery life and range for tag, and made hardware for dual-band RFID service.

Many researches and projects are implemented about u-IT according to changes of ubiquitous environments in the world. Especially, there are benefits to raise lifestyle and we can develop industry by applying ubiquitous regionally. Also it makes citizen feel comfortable directly. There are many projects to regionally adopt ubiquitous services like u-City model for getting this advantages. RFID technology must be suited to each environment because each RFID tag has different characteristics according to frequency band. We need to integrate bands of RFID to overcome limitations and provide more detail information and services. In this study, we develop the dual band RFID Manager needed adopting u-Zone service for both 13.56MHz and 2.45GHz. The RFID Manager, application software for base station of u-Zone, delivers the information from readers to integrated u-Zone server system.

In this study, we suggest a standardization of the logistics terminologies in Korean Standard to improve its consistency. To support this work, some principles for terminology selection and corrections are studied based on the guideline in international standard. The revised terminologies are summarized in Appendix for 20 logistics-related Korean Standards.

Recently, an industrial production-distribution planning problem has been widely investigated in Supply Chain Management(SCM). One of the key issues in the current SCM research area is reverse logistics network. This study have developed a simulation model for the reverse logistics network. The simulation model analysis reverse logistics network issues such as inventory policy, manufacturing policy, transportation mode, warehouse assignment, supplier assignment. Computational experiments using commercial simulation tool ARENA show that the real problems. The model can be used to decide an appropriate production-distribution planning problem in the research area.

The types and quantities of Hazmat and Hazmat transportation are gradually increasing, keeping pace with industrialization and urbanization. At present the safety management for Hazmat transportation only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Thus the methods to reduce risk (Risk=ProbabilityConsequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method is invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management on Hazmat transportation in railway industries can be suggested. (1st step: building up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP). In conclusion, those 7 steps are used as a standardization method of optimum transportation routing. And to increase the efficiency of optimum transportation routing, optional route can be revise by verification.

The minimum latency problem, also known as the traveling repairman problem and the deliveryman problem is to minimize the overall waiting times of customers, not to minimize their routing times. In this research, a genetic algorithm, a clonal selection algorithm and a population management genetic algorithm are introduced. The computational experiment shows the objective value of the clonal selection algorithm is the best among the three algorithms and the calculating time of the population management genetic algorithm is the best among the three algorithms.

Electronic Product Code Information Services(EPCIS) is an EPCglobal standard for sharing EPC related information between trading partners. EPCIS provides a new important capability to improve efficiency, security, and visibility in the global supply chain. EPCIS data are classified into two categories, master data (static data) and event data (dynamic data). Master data are static and constant for objects, for example, the name and code of product and the manufacturer, etc. Event data refer to things that happen dynamically with the passing of time, for example, the date of manufacture, the period and the route of circulation, the date of storage in warehouse, etc. There are four kinds of event data which are Object Event data, Aggregation Event data, Quantity Event data, and Transaction Event data. This thesis we propose an event-based data model for EPC Information Service repository in RFID based integrated logistics center. This data model can reduce the data volume and handle well all kinds of entity relationships. From the point of aspect of data quantity, we propose a formula model that can explain how many EPCIS events data are created per one business activity. Using this formula model, we can estimate the size of EPCIS events data of RFID based integrated logistics center for a one day under the assumed scenario.

Since 1995, the small and medium enterprise introduced the Quality Innovation Program that is called 100PPM Quality Renovation Program. A point of 2000, the program's name was changed by Single PPM Quality Innovation Program in pursuit of defects below 10ppm in outgoing quality. Nowaday 1,651 companies is received Single PPM Quality Certification from government at the end of 2008. On the other side, the return or withdrawal of certification is going on because of various reasons. In this study, we analyse the status of certification's preservation and cancellation, and suggest the cooperation ideas between government and companies.

In this paper, we propose development of new products including the proposed process of at the customer's requirements. The success of new product development depends on customer satisfaction in the marketplace. Existing product development process, including the customer's interest was weak. In this paper, we propose development of new products which include Kano's attractive quality factor method and Timko's customer satisfaction index method. Also we verified new medical treatment of incontinence-nency which is applied to the proposed process.

The object of this paper is established for a paradigm for the organization. Although concerns on management get increased in these days, there is no general and systematic framework for a unified sector. Therefore this study proposes the new general and systematic framework for managing in organization, through applying Service-Engineering model. The new framework of this study provides the general sector of organization model, the method of analyzing BSC and RMS, and system model for Risk Management. Furthermore, this study suggests the practical ways of developing a paradigm.

The purposes of this study is to verify whether insider trader get the excess return using inside information. For this we divide inside traders into four groups according to their ownership: maximum shareholder, main shareholders, 5% shareholders and executives. Also we categorize inside traders into three groups: personal investor, foreign investor and institutional investors. After insiders trade their stock, excess return is reported for 20days and the size of excess return of executives and institutional investor is larger than that of other groups. It means more strict monitoring system is needed in the domestic stock market.

The purposes of this article is to analyse how market competition of credit card company affect price(interest rate) and survival length of card users. This paper uses individual account data from a large Korean credit card company during the periods from 2002 to 2006. The findings of our study are as follows. First, market competition of credit card company have a negative effect with interest rate of credit card. Second, market competition of credit card company have a affirmative effect with survival length. Finally, The effect of Increasing delinquency rate due to price increase is smaller than decreasing delinquency rate due to extending survival length.

we can easily find numerous cases, where the outcomes are not up to their expectations, despite the enormous efforts and investments poured on developing ERP systems. Consequently, we are in need of a new methodology for efficient implementation and Maintenance of an ERP system. Therefore, we have investigated and analyzed various problems that may occur in adopting ERP systems, such as high implementation costs, shortage of professional manpower, and lack of active participation from insiders. In this thesis, we developed a new ERP system, focusing on accounting management modules and benchmarked our proposed model to one of the real companies.