Earticle

Safety management was divided by the competent authorities supplier, and customer with responsibility and authority. Gas accident were caused by treatment problem on the supplier and user, on technical and use management mater, on facilities and goods, and included problem with gas safety connection system. Especially, the big accident of the inside and outside of the country occurred during recent year was newly recognized with the whole society about safety. This study is present standard application plan of each department to use planning gas technical standard and gas utilization standard of introduction model than statute for change of self-regulation management system and complicated regulation of examination center and order.

The modem industrial society is developing while growing more diverse and gigantic. Accordingly, occupational injuries or accidents can be caused in various situations, not just in the limited range of workplaces but also in the surroundings, and interest has increased in the prevention of occupational accidents with respect to occupational health and safety, and environment. Thus, this thesis will consider 4MlE (Man, Machine, Method, Material, Environment) as the fundamental causes of accidents and introduce a model of system in which the output of the process control system is replaced by accidents with its input by 4M1E. Furthermore, it will demonstrate how occupational hazardousness can be measured, whereby it can also be rated, by examining the relationship between 4M1E and types of accident in terms of the categories of severity, frequency, and detectability, based on the application of the model to the framework of FMEA.

We achieved a Quantitative economic growth through rapid developed in 1970' and 1980'. It was confronted after IMF crisis that we needed to improve the past economic policy and the industrial structure. In line of that, the problem of the industrial structure like huge accidents of 1990' converted the recognition of safety. And to improve the conversion, the research of a safety management was needed. In this paper, we thought 4M1E(Man, Machine, Method, Material, Environment) as the cause of accident using the principal of process, assuming that output is accident. Applying 4M1E to the structure of QFD(Quality Function Deployment), we propose the safety function deployment, which has the flow line as followed; demand safety, safety characteristic, direct cause, 4M1E and safety management.

The processes of manufacturing FRP sewage disposal tanks are very dangerous and hazardous jobs for workers because of large size and heavy weight of the tank, toxic fiberglass dust, nasty smell, and dangerous tools such as hand-grinders. This paper introduces an automatic manufacturing system of the FRP sewage disposal tank to enhance the safety of workers. The system consists of 3 components: the FRP body rotation jig, the automatic manhole cutting machine, the automatic sanding processing machine. The safety of workers and working environment are greatly improved, because the dangerous jobs are automatized and the toxic fiberglass dust is automatically collected. Also, the productivity is greatly improved and the cost is reduced.

Industrial facilities are becoming more complex and various with rapidly developing technologies. A number of installations and equipments are increased to improve productivity, and they are operated under the condition of high temperature and pressure. They are continuously repaired, replaced or abolished because of the deterioration with time, but their repair and replacement are not easy for economical and environmental concerns. If possible, the deteriorating equipments should be inspected and repaired effectively considering the state of maintenance and preservation, economic efficiency, and safety. That's where RBI(Risk Based Inspection) fits in. Even if RBI technology has been known among specialists, there were no tools readily available and it was hard to practice and apply RBI in industrial inspection and safety management. In the development of the qualitative RBI, the overall algorithm adopted API-581 BRD. The qualitative RBI program was developed to search the appling process.

In this paper, a group replacement policy based on a failure count is analysed. For a group of identical repairable units, a maintenance policy is performed with two phase considerations: a repair interval phase and a waiting interval phase. Each unit undergoes minimal repair at failure during the repair interval. Beyond the interval, no repair is made until a number of failures. The expected cost rate expressions under the policy is derived. A method to obtain the optimal values of decision variables are explored. Numerical examples are given to demonstrate the results.

According to the changing environment of management, the concept of the one-to-one marketing is appeared in the environment of management by high Quality that customers needs. In this paradigm, CRM(Customer Relationship Management) offering integrated multiple view points is able to be executed by the advance of Information Technology (IT). In this study, the environment and the management status of the steel company that CRM implemented is analyzed. This study presents the system architecture which applies OLAP(on-line analytical processing), web technologies, and logistics service. Then this research presents a variety of effects and development direction in the future.

Globalization of Economic activities have increased Company's interests about International Logistics Management. Expansion of International trade depends on International Logistics which can overcome distance and time. In In-cheon, There are many small scale and minor Freight Forwarders take advantage of being linked with a port, an airport but their inefficient paper works cause raising of Logistics costs and losing of competitive power. In this study, we design a web based ocean forwarder information system for freight forwarder to solve these problems. So, this system will provide decreasing operation time, human resources, and accessing easily because of web based system, and finally decrease logistics cost and improve national competitive power.

This Study will introduce the concept of A TP(A vailable To Promise) and CTP(Capable to Promise) through the existing study, the process analysis of CTP, the modeling of algorithm and the embodiment of system. This research considers the environment of using Job-Shop method. The CTP algorithm models using LPST(Latest Possible Start Time) and EPST(Earliest Possible Start Time) method especially. It is important part of executing CTP systems. The CTP modeling and implementing develops to system which is capable to implement in the various business environment through additional and continuous research.

In this paper, we purpose the integrated TMS to solve the problem of current systems. The current system resulted in inconvenience because customers and users must contact to each system, when they want to know the information about orders. In this research, we develope a system with which customers and users can confirm all of order information from one system. To solve this problem, the information brought from two systems is integrated by constructing integrated database.

Greeting the globalization and information period of 21C, the improvement of the distributional system structure and modernization of publishing distribution are the seriously required periodic assignments for the publishing industry that is a national knowledge and culture industry to be equipped with the core competitiveness. First, it is to found a large distributional organization that is able to provide total logistics services in time that is essential to the publishing company and bookstore. Second, it is to have a logistics service to act up to the variable requirements of customers such as publishing companies and bookstores under the rapidly changing distribution environment. Third, it is to provide the standardized information of publishing distribution. It is needed to establish a total distributional center in collaboration to satisfy the requirements of publishing industry as above. By doing this work, structure of the publishing distribution system can be improved and its constitution can be strengthen, and it is possible not only to construct a stable supply system but also to realize an information-based system in the publishing industry with the construction of information system and its utilization. Furthermore, the application of RFID in the publishing distribution is essentially required to provide the symbolic model and logistics infrastructure into the 'Paju publishing culture information industrial complex'. It could be possible by growing the international recognition regarding distribution environment and strengthening the international competitiveness in the period of the ""Open door"uot;"Open door"door&"uot;

This paper first addresses a distribution planning method on centrally controlled supply chain. The distribution channels are assumed to be network of arborescence form. For such distribution networks, this study proposes a distribution planning scheme when the demands for retail sites are provided for a given planning horizon. As the planning horizon rolls forward, for a new horizon, forecasted demand distributions of periods in the horizon are updated. An idea of controlling customer service level by the selection of demand to be used in the planning (Demand Used in Planning, DUP) from the forecasted values is also discussed.

The goal of this paper is to offer a quantitative decision model using Quality Function Deployment(QFD). We consider the factors outsourcing that affect the benefits of the organization and the fifth alternatives that were selected to be considered for outsourcing as customer requirements and technical attributes in QFD. For selecting the outsourcing system, we compute the priority considering interdependencies among alternatives. Thus this paper propose a decision model, which uses the quality function deployment to help practitioners set priority and users in structuring the outsourcing problems.

The results of this study has been split into two components, On set of results addressed the strategy of developing a Agility for maintenance consumer. The other set of results addressed the strategy of illuminating the successful measurement and concepts formed during the maintenance problem solving process, especially in the context of the Logistics Information system by aggregation information space. This paper presented a classifiable elements of Agility & Measurement of logistics capability in the Korea market. These concepts are positioned in a framework to give a better understanding what the consequences are of the changing business environment. The developments towards more globalization which leads to centralization and mass individualization that has a tendency to go more in the decentralized solutions, seems to be in contradiction. we will focus a proposal of Logistics information system and demand management decisions that should be a prime concern of any profit maximizing firm, unready strategy of investment. and we will prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influnce for a cause and effect basically.[5]

The production using U-shaped line is studied. This research presents the relationship among machining time, cycle time and production rate in a U-shaped line. The U-shaped line produces shafts by automated machines. In this paper when any production rate is given the U-shaped line always satisfies the production rate. An algorithm is developed for the determination of cycle time, the number of machines and workers of the U-shaped line in order to minimize the total machine capacity and the number of workers for any given production rate. The U-shaped line was successfully designed by applying the proposed algorithm.

To suggest a more efficient way of delivering information for process control under computerized environment, population stereotypes of colors were tested with 57 Korean subjects. The subjects were asked to associate 11 colors salient at electronic video displays with 55 pairs of adjectives that might be used when they explain the current state of process. The levels of association were evaluated with semantic differential methods by 7 point scales. Based on the multivariate analyses, the 55 pairs of adjectives were grouped into three distinct dimensions. The emotional maps of the 11 colors with respect to each dimension were presented. The Quantitative relationships between the colors and subjective impressions were also calculated by quantification theory I. On the basis of these color associations, it was suggested a general guideline for color coding when delivering process information

In this research, OIL (Ontology Inference Layer), one of the ontology language, is applied for classifying product data systematically, defining concepts, and establishing relationship between concepts. By transforming steel product data into XML documentation and managing them, knowledge management based on the logical structure of documents is possible.

We can be acquire the conformation about on the due date of supplier by using the A TP(A vail able to Promise) function of management about real and concurrent access on the supply chain, also decide the affect about product availability due to forecasting or customer's orders through the A TP. Under the these environments, defines the A TP rule that can improve the customer value and data flow related the LTV(Life Time Value) and builds on a algorithm. In this paper, It consolidates the necessity on a LTV (Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV rule that can improve the customer value. And then, Scheduling plays an important role in shop floor planning. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem.

Quality management has been recognized as an important means to secure business competitiveness for management environment changes and competitiveness reinforcement. An effort of an ISO 9001 certification has thought that it is the best way to practice quality management. This paper checks a quality management situation of manufacturing companies that acquired ISO 9001 certification. Then, this paper investigates whether quality management is actual1y contributing to production performance and proposes proper alternatives for an improvement of production performance.

Recently, International Standardization is an important issue in competitive world market because of integration of standard, liberalization of international trade and globalization. Consequently, Korean companies need a strategy about corresponding to market circumstance and global standard. In this study, we examine Intellectual Property, Patent and Antitrust Law which are related to standardization. This study suggests company strategy and system integration model to dispose the global standard.

According to the World Competitiveness Yearbook(WCY), competitiveness of nations looks how nations create and maintain an environment which sustains the competitiveness of its enterprises. To develop economics and join the ranks of the advanced countries in the global market, Korea needs to consider the national competitiveness. Consequently, in this study, first, we try to know a concept of national competitiveness. Second, we also investigate models of national competitiveness. Finally, we suggest an improvement strategy, which is based on models, as compared with many countries of Europe.

This study aims to examine the effects of team member characteristics(change reception, work understand) and team process(potency, social support, workload sharing, communication and cooperation within the team) to team effectiveness(job commitment, job satisfaction and productivity), As the result, both team member characteristics and team process have positive relations with team effectiveness

This paper describes the NC simulator system for Wire-cut electrodischarge machining. Electrodischarge Wire-cut machining is applicable to all materials including metals, alloys, and most carbides. Although CAM system generate the NC code considering electrodischarge conditions, incorrect Wire-cut tool path bring about fatal results. The simplest way of simulating a EDM process is to display the trajectory of Wire-cutter location by line segments. With this kind of simulation, the programmer can get a general idea about whether the wire is moving as planned but cannot locate gouging or excess material because only the wire location will be seen, not the changes in the workpiece as it is machined. The ideal way of simulating the EDM process is to display the solid model of the workpiece as it is machined. Therefore we propose the ideal NC simulator system for Wire-cut EDM.

An inorganic filling agent, ATH (alumina trihydrate) was used to induce inorganic-organic coupling by mixing with stearic acid, acryl silane, vinyl silane as surface treatment agents in order to apply as a high voltage insulating material. Volumetric resistivity was shown to vary with surface treatment agents, and the highest value was obtained in case of the mixture with vinyl silane. The dielectric breakdown intensity was shown to decrease gradually and saturate to a stable value, possibly due to the increase of cross link density in the vinyl radicals introduced to silica surface, resulting in stable dielectric breakdown intensity in the final stages. Tracking and flame retardant properties were also shown to be the best among the samples investigated in this study.

This paper is to study the energy absorption characteristics of CF/Epoxy(Carbon Fiber/Epoxy Resin) laminated shell with the various curvatures subjected to transverse impact loadings under the low impact velocity in consideration of design of structural members for use of transportation machine, which are consisted of the characteristics of high stiffness, strength and lightweight. The curvature radius are associated with the energy absorption characteristics of CF/Epoxy laminated shell which is brittleness material. In all tests, maximum load of CF/Epoxy laminated plate is higher than that of laminated shell with curvature, but maximum deflection is lower. And then absorbed energy of laminated shell with curvature is higher than laminated plate(curvature radius is unlimited), As curvature radius is increased, the absorbed energy is increased in laminated shell with curvature.