2017 (89)
2016 (69)
2015 (87)
2014 (89)
2013 (40)
2012 (66)
2011 (41)
2010 (36)
2009 (15)
2008 (18)
2007 (24)
2006 (26)
Performance Characteristic of satellite Wibro system in the high-speed Railroad Channel Environment
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.1-9
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
본 논문은 고속철도 채널환경에서의 위성을 통한 Satellite Wibro 시스템의 성능열화특성과 이에 따른 보상기법에 대해 서술하였다. 고속철도 채널환경은 LOS채널 과 터널환경으로 구분되고 LOS 환경에서는 고속철도 파워 급전선에 의한신호블로킹에 의한 문제와 터널내 에서는 Optic Fiber내에서와 같은 다중경로 간섭문제가 발생한다. 이러한 전형적인 두채널 공간에서의 위성 와이브로 시스템 성능열화 특성을 해석적으로 규명하고 컴퓨터 시뮬레이션을 통하여 확인 하였다. 아울러 300 km/h 이상으로 이동하는 고속철도에서 발생되는 OFDM 시스템의 도플러 효과에 의한 ICI 현상과 이를 보상할수 있는 기법을 해석적 ,실험적 결과를 통하여 증명하였다.
In this paper, we describe the performance degradation of satellite Wibro system and compensation method in the high-speed railroad channel environment. High-speed railroad channel environment is divided into LOS channel and tunnel. In the LOS channel, signal blocking caused by railroad power feeder structures can be a critical problem which is can be solved with antenna diversity. On the other hand, multi path interference phenomenon, representable by propagation model of Optic Fiber, occurred in the tunnel may be another obstacle. These satellite Wibro system performance degradations in railroad channel environment are addressed and dequate compensation methods are proposed and verified through computer simulation. In addition, the ICI caused by Doppler shift in OFDM system is analyzed with its compensation method.
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.10-15
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
위성방송수신 및 위성 양방향 인터넷, VSAT 등의 위성통신서비스를 차량 이동 시에도 이용할 수 있기 위해서는 차량에 탑재하기 용이하도록 소형이며 높이가 낮은 안테나 구조가 요구된다. 또한 중위도 지역에서 평면 안테나 상태로 45도 틸트 특성을 갖고, Ku 밴드의 위성통신용으로 충분한 고이득을 얻기 위해, 빔폭이 좁고 사이드로브가 적으며 저손실 구조의 배열안테나 개발이 필요하다. 본 논문에서는 이러한 성능을 만족시키기 위해, 진행파형 누설파 모드를 기초로 한 수직 편파로 동작하는 도파관 종방향 슬롯 배열안테나를 제안하였다. 16개 누설파 소자의 배열안테나 이득은 30 dBi 이었으며, 빔폭은 4.9도, 사이드로브 레벨은 -20 dB 이하, 중심주파수에서 빔틸트 각도는 45도를 얻었다. 급전선로는 도파관의 병렬급전 방식으로 설계하여 광대역, 저손실 특성을 얻을 수 있었다.
Small size and low profile antenna for mobile vehicular-top-mounted is needed in satellite communication services such as DBS, Satellite Internet and VSAT. In middle latitudes, the development of an array antenna which has the conformal, low profile and 45 degree beam tilted configuration, and has the high gain with sharp beamwidth, low sidelobe and low loss is required for Ku-band satellite communication. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. An array antenna consisting of 16 leaky-wave elements is showing 30 dBi of gain, 4.9 degree of beamwidth, below than -20 dB of sidelobe level, 45 degree of beam tilt angle in center frequency. Feed network designed by waveguide cooperated feed shows good performance of wideband and low loss.
Station Keeping Maneuver Planning Using COMS Flight Dynamic Software
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.16-21
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
Design of spectrum spreading technique applied to DVB-S2
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.22-28
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
일반적으로 대역확산기술은 원하는 전송신호에서 요구되는 최소 나이퀴스트 대역과 관련하여 신호 대역의 인위적인 확산하는 것으로 인식된다. 대역확산은 재밍, 간섭 등의 탄력성, 신호전력의 감소 등 여러목적으로 사용된다. 본 논문에서는 대역확산은 작은 안테나, 송신 EIRP 증가없이 수신신호의 에너지를 증가시키고 링크버짓의 제한을 만족시키기 위함이다. 실제로 많은 이동환경 시나리오에서 DVB-S2 표준의 낮은 대역폭당 전송효율 형태의 전송형태에도 링크버짓을 만족시키지 못할 수 있다. 대역확산기술은 송신단의 전력제한환경하에 기존의 DVB-S2의 새로운 전송형태의 추가없이 시스템성능을 만족시킬수 있는 기법이다. 이러한 목표를 위해 대역확산기술의 설계는 스펙트럼 형상, 물리계층 성능, 링크버짓, 하드웨어 재사용, 강인성, 복잡도, 존재하는 사용 모듈과의 호환성등이 고려된다. 제한된 기법의 구현은 현재 DVB-S2 를 완전히 만족시키는 것이 가능해진다.
Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an ‘inner layer’ in the standard DVB-S2 chain.
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.29-35
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
통신해양기상위성은 다목적 정지궤도위성으로서 Ka대역 통신탑재체, 기상센서 및 해양센서를 하나의 위성플랫폼에 탑재한 복합위성이다. 본 논문에서는 한국정부의 자금으로 개발되는 첫번째 혁신적인 정지궤도 통신해양기상위성 프로그램에 대해서 소개하고자 한다. 위성플랫폼은 아스트리움의 UROSTAR 3000 통신위성을 기반으로 하고 있으며, 세 개의 다른 탑재체를 효과적으로 수용하기 위하여 화성탐사선 Express를 일부 활용하였다. 세개의 탑재체 중 통신탑재체는 스위칭 다중빔 기술을 검증하고 광대역 멀티미디어 통신서비스를 시험하는데 목적이 있다. 기상센서임무는 고해상도 멀티분광 센서로 지속적으로 한반도 기상데이타를 산출하는데 있으며, 세계 최초의 정지궤도 해양센서는 한반도의 어류자원정보및 장단기 해양정보의 모니터링을 목적으로 하고 있다. 통신임무와 원격탐사임무를 동시에 수행해야 하므로 위성체의 요구사항은 매우 복잡하여 이를 만족시키기 위한 설계 및 조립/시험의 난이도는 매 우 높다고 할 수 있겠다.
COMS satellite is a multipurpose satellite in the geostationary orbit, which accommodates multiple payloads of the Ka band Satellite Communication Payload, Meteorological Imager, and Geostationary Ocean Color Imager into a single spacecraft platform. In this paper, Korea’s first innovative geostationary Communication, Ocean and Meteorological Satellite (COMS) program is introduced which is fully funded by Korean Government. The satellite platform is based on the Astrium EUROSTAR 3000 communication satellite, but creatively combined with MARS Express satellite platform to accommodate three different payloads efficiently for COMS. The goals of the Ka band satellite communication mission are to in-orbit verify the performances of advanced communication technologies and to experiment wide-band multi-media communication service. The Meteorological Imager mission is to continuously extract meteorological products with high resolution and multi-spectral imager, to detect special weather such as storm, flood, yellow sand, and to extract data on long-term change of sea surface temperature and cloud. The Geostationary Ocean Color Imager mission aims at monitoring of marine environments around Korean peninsula, production of fishery information (Chlorophyll, etc.), and monitoring of long-term/short-term change of marine ecosystem. The system design difficulties are in the different kinds of payload mission requirements of communication and remote sensing purposes and how to combine them into one to meet the overall satellite requirements. In this paper, Ka band communication payload system is more highlighted.
The Communication Satellite Transponder Testing by EGSE System
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.36-40
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
EGSE is used to check out satellite payload during the development prior to launch. The EGSE represented in this paper is a test system for Ka band communication transponder of COMS. The EGSE consist of two subsystems as CTS subsystem and PCTS subsystem. Communication Test subsystem (CTS) performs satellite transponder RF performance testing, data analysis and trending. Most of transponder RF performances are automatically tested by the CTS subsystem. Power, Command & Telemetry subsystem (PCTS) monitor telemetry messages from the transponder and send tele-commands to satellite transponder for the configuration change. PCTS also provide simulated S/C power to the transponder during the ground validation testing. The EGSE test functions are verified by the transponder simulator testing and will be used for the flight model transponders testing.
Auto-compatibility Analysis for Ka-band payload of COMS
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.41-47
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
2009년 발사예정인 우리나라가 개발한 최초의 정지궤도위성 COMS에는 기상센서, 해양센서 및 Ka대역 통신탑재체등 세개의 탑재체가 실리며 해양센서 및 기상센서의 측정데이타를 전송하기위한 L대역 통신중계기가 있다. 또한 S대역의 원격측정 및 원격명령서브시스템과 Ka대역 비콘등이 있다. Ka대역 통신탑재체는 스위칭 중계기로서 부품의 우주인증 및 재난통신서비스에 활용될 전망이다. 또한 Ka대역 비콘은 지상국 안테나의 포인팅 및 강우감쇠 실험을 포함한 Ka대역 전송실험에 활용될 예정이다. 본 논문은 L대역 센서데이타 전송용 중계기 및 S 대역 원격명령/측정 서브시스템의 RF 복사가 Ka대역 중계기 및 비콘에 어떤 영향을 주며, Ka밴드 비콘이 L 대역 및 S 대역 중계기에 어떤 영향을 주는지 조사하였다. 중계기들의 상향/하향 링크시 출력, 안테나들의 기하학적 위치 및 거리 및 중계기들에 포함되어 있는 필터들의rejection 그리고 편파에 의한 degradation factor등을 포함하여 coupling factor를 고려하여 상호 호환성을 고려하였다. 분석결과 L대역 및 S대역 중계기에 의한 Ka대역 탑재체에 대한 영향은 미미한 것으로 계산되었으며, Ka대역 비콘의 영향도 무시할 정도임을 밝혔다.
The first geostationary satellite made by Korea, COMS, has the three different payload ; Meteorological sensor, Oceanographic sensor and Ka-band communication payload. There are Meteorological & Ocean Data Communication Subsystem(MODCS) and Telemetry, Command and Ranging Subsystem(TC&R) as other RF radiation sources. MODCS transmits and receives Meteo and Ocean measurement data from/to earth using L-band and TC&R using S-band. The Ka-band communication payload will provide high-speed multimedia services and communication services for natural disaster such as prediction, prevention, and recovery services in the government communications network. Ka-band beacon is for the earth antenna pointing and the experiment of rain fading. This paper gives the analysis results about the mutual radiation effect on Ka-band communication payload, Kaband beacon, MODCS and TC&R. Up/Down link power and coupling factor including the geometrical position and distance of antenna, filter rejection and degradation factor due to the different polarization are considered. The results show MODCS and TC&R are compatible for Ka-band communication payload and Ka-band beacon does not interfere with MODCS and TC&R normal operation.
A Design of Software Receiver for GNSS Signal Processing
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.48-52
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
최근들어 하드웨어방식의 GPS 수신기를 소프트웨어 방식의 Software-Defined Radio(SDR)기법으로 구성하는 연구가 활발히 진행되고 있다. 이러한 소프트웨어 기반의 GPS 수신기는 기존의 하드웨어 방식으로 처리하는 신호획득부와 추적부를 마이크로 프로세서를 통해 소프트웨어 기법으로 처리하는 것을 말한다. 본 논문에서는 이러한 소프트웨어 기법을 이용하여 GPS 수신기를 설계하며 PC 기반에서 시뮬레이션을 통해 신호획득부, 추적부, 메시지 복조부를 설계하고 검증한다. 또한 의사거리 오차를 도출하기 위하여 신호 획득부와 추적부에 대해 효율적인 알고리즘을 제안하고 최종적으로L1 주파수대역의 여러 위성을 통해 수신된 채널간의 상대적 지연을 통해 의사거리를 계산한다. 본 논문에서 제시된 수신기기법은 향후 개발목표인 GPS/Galileo 복합시스템의 개발요소에 포함될 것이며 규격 및 성능을 검증할 방법을 제시할 뿐만 아니라 다양한 디버깅 환경을 제공함으로써 개발단계에 매우 유용하게 적용될 것이다.
Recently, the research of GPS receiver which uses the Software-Defined Radio(SDR) technique is being actively proceeded instead of traditional hardware-based receiver. The software-based GPS receiver indicates that the signal acquisition and tracking treated by the hardware-based platform are processed as the software technique through a microprocessor. In this paper, GPS software receiver is designed by using SDR technique and then the signal acquisition, tracking, and the navigation message decoding parts are verified through the PC-based simulation. Moreover, the efficient algorithms are developed about the signal acquisition and tracking parts in order to obtain the accurate pseudorange. Finally, the pseudorange is calculated through the relative channel delay received through the different satellite of L1 frequency band. GPS software receiver proposed in this paper will be included in the element of GPS/Galileo complex system of development target and will provide not only the method that verifies the performance for Galileo Sensor Station standard but also usability by providing various debugging environments.
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.53-58
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
위성통신시스템은 넓은 커버리지를 바탕으로 광범위한 지역에 통신을 가능하게 하는 장점을 가지고 있다. 그러나 위성통신 시스템에 할당된 주파수 대역의 사용률은 셀룰러 시스템과 같은 다른 무선통신시스템과 비교할 때 상당히 낮은 효율을 보인다. 그러므로 할당된 주파수를 이용하여 부가적인 서비스를 제공하고, 주파수 효율을 높이기 위한 방법들이 연구되고 있다. 본 논문에서는 허가 대역에서 새로운 서비스를 적용할 수 있는지에 관하여 분석해보고, 새로운 서비스를 적용하기 위하여 가장 중요한 부분인 위성 터미널의 신호를 정확하게 검출하는 방법을 제안한다. 제안하는 방법은 간섭을 회피하기 위하여 Spectrum Sensing과 Eigenvalue 검출하고, 결론을 통하여 터미널의 신호를 검출하고 성능을 분석한다.
The Satellite Mobile Communication System holds several advantages, such as wide coverage that guarantees the communication in a huge area. It is suitable in the ocean and forest and especially in emergency situation. However, the licensed frequency is not always occupied within all coverage and all the time. The actual utilization rate is relatively low compared to other wireless communications such as cellular systems. There are a large amount of white spaces in its coverage. Therefore, it is necessary to consider introducing additional services such as data communication, in order to increase the spectrum utilization as well as the revenue of the Satellite service provider. In this paper, we first analyze the possibility to implement new services in the licensed band of satellite mobile phone by its provider. Then we address the most significant issue for the implementation of current service, which is how to accurately detect the satellite mobile terminals. Finally, we suggest two new possible solutions namely, eigenvalue detection based methods to find out the existence of transmitted signal from the satellite mobile terminals.
Ka-band Satellite Broadcasting System using Scalable Video technology
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.59-63
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
본 논문에서는, 스케일러블 비디오 압축 기술을 이용한 Ka대역 HD 위성방송 시스템을 소개하고자 한다. 이미 알려진 바와 같이, Ka대역은 강우감쇠에 취약한 특성으로 인해 HD 위성방송 서비스를 제공함에 있어서 일정 수준 이상의 가용도가 보장되기 어렵다. 그러한 문제점을 극복하기 위한 방안으로서, 본 논문에서는 H.264 SVC 비디오 기술을 기반으로 한 계층형 방송 시스템의 개념과 그에 따른 몇 가지 형태의 시스템 시나리오를 제시하고, 각각에 대한 비교 분석을 통해 최적의 모델을 제시하고자 한다. 각 시나리오에는 DVB-S, DVB-S2 전송 규격이 포함되며, 변조 방식으로는 QPSK와 8PSK등이 고려되었다. 모든 경우에 대하여, 2 계층 공간 스케일러블 비디오 압축 방식이 적용되었다.
In this paper, we propose an advanced Ka-band satellite HD broadcasting system using scalable video coding technology. As already known, it is not so easy to achieve reasonable link availability on Ka-band because of the rain-attenuation effect, and in case of HD broadcasting service it’s more difficult. To overcome that problem, we propose an hierarchical broadcasting system based on H.264 SVC technology. In this paper, we suggest a few types of system scenario to realize the concept. Those scenarios are including DVB-S and DVB-S2 and spatially scalable video stream is the source stream in all cases.
4,000원
본 논문에서는 기존의 GPS 항법 신호와 유럽에서 새롭게 추진되고 있는 갈릴레오 위성 항법 신호를 동시에 수신할 수 있는 광대역 고정밀 위성 항법 수신기의 RF 수신단 장치 설계 및 제작 결과에 대하여 기술하고 있다. 고정밀 광대역 위성 항법 수신기는 L‐대역 안테나, 항법 신호별 RF/IF 변환부, 그리고 고성능 기저대역 신호처리부로 구성되어진다. L‐대역 안테나는 1.1GHz~1.6 GHz를 수신할 수 있어야 하며, 항법 위성이 지평선 가까이에 있을 경우의 항법 신호를 수신할 수 있어야 한다. 갈릴레오 위성 항법 신호는 L1, E5, E6의 서로 다른 대역의 신호를 가지고 있으며, 신호 대역폭이 20MHz 이상으로 기존의 GPS위성 항법 신호보다 광대역이며, 따라서 수신기의 IF 주파수가 높아지며, 수신기의 처리 속도도 빨라져야 한다. 본 연구에서 개발한 수신기의 RF/IF 변환부는 단일 하향 변환기 구조의 디지털 IF 기술로 설계되었으며, IF 주파수는 위성 항법 신호의 최대 대역폭과 표본화 주파수 등을 고려하여 140MHz로 설정하였으며, 표본화 주파수는 112MHz로 설정하였다. RF/IF 변환부의 최종 출력은 디지털 IF 신호로서, IF 신호를 AD 변환기로 처리하여 얻게 된다. 본 연구에서 설계된 위성 항법용 고정밀 수신기 RF 수신단은 ‐130 dBm의 입력 신호에 대하여 40dB Hz 이상의 C/N0 특성을 가지며, 40dB 이상의 동적 범위를 갖도록 자동 이득조절 장치가 포함되어 있다.
This paper describes the development of RF front‐end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L‐band antenna, RF/IF converters for multi‐band navigation signals, and high performance baseband processor. The L‐band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has een derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front‐end has the C/N0 performance over 40dB‐Hz for the ‐130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.
고속열차대상의 위성인터넷 서비스 제공을 위한 위성무선연동 기술(서비스 시나리오 관점)
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.69-74
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
최근 이동환경에서의 고속 위성통신 서비스에 대한 요구가 증가하고 있다. 이러한 요구를 만족시키기 위해 유럽및 북미지역에서는 지난 수년간 Ku대역을 활용한 고속이동체 대상의 이동형 위성통신 시스템 개발이 활발히 진행되고 있다. 하지만 기존의 이동형 위성통신 시스템은 수십 Kbps 정도의 전송속도를 제공하기 때문에 고속열차와 같이 다수의 그룹 사용자들을 대상으로 한 위성 인터넷 서비스 제공에 한계가 있다. 또한, 철도 운행구간에서 발생하는 N-LOS 환경에 대처하는 기술의 부재로 서비스 가용도가 크게 저하된다. 본 논문에서는 고속열차 승객을 대상으로 위성무선연동 전송기술을 이용하여 지상무선망과 동일한 수준의 끊김없는 인터넷 서비스를 제공하기 위한 이동형 광대역 위성 인터넷 접속 시스템에 대해 기술한다. 고속열차를 대상으로 이러한 서비스 제공을 위해서는 터널이 역사(Railway Station)와 같은 N-LOS 환경에 대한 대처기술이 필요하며, LOS 환경에서도 철로상에 설치되어 있는 Electric Power Post 나 Power Bridge 등으로 인한 주기적이고 짧은 시간 동안의 신호열화 현상이나 고속 이동에 따른 도플러 현상에 대한 극복기술이 필요하다. 이를 위해 본 시스템에서는 안테나 다이버시티 기법 및 갭필러와 지상무선망과의 연동기술이 적용되어야 하며, 상위 레이어에서의 에러 정정 기술이 적용된다. 본 논문에서는 위와 같은 기술이 적용되어 고속열차 승객들을 대상으로 한 위성인터넷 서비스 기술에 대해 기술한다.
Recently, the demands for the satellite broadband mobile communication services are increased. To provide these services, mobile satellite communication systems for the passengers or crews on the high-speed moving vehicles, are being developed for the last several years especially in the Europe and North America. However, most of these systems can provide only several hundred kbps of transmission rate and this is not enough performance to provide satellite internet service for the group users such as passengers on the high-speed train. Moreover, service availability with these systems is limited to be rather low because they don’t have any countermeasure scheme for the N-LOS environment which happens often along the railway. This paper describes mobile broadband satellite communication system, which is on the development, to provide high data-rate internet services to the high-speed trains. This system is applied with the inter-networking scenarios of both satellite/terrestrial network and satellite/gap-filler network so that it can provide seamless service even in the train operating environment, and these inter-networking schemes result in high service availability. And this system also has the countermeasure schemes, such as upper layer FEC and antenna diversity, for the short fading which is occurred periodically on the railway due to the power supplying structures so that it can provide high speed internet services. Mobile DVB-S2 technology which is now being standardized in the DVB is used for the forward-link transmission and DVB-RCS for the return-link.
Applications of Satellite Imagery to Surveying Archeological Sites and Remains
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.75-79
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
선조의 유골 매장지와 함께 고구려 왕조(37BC~771AD)의 산성과 이조 왕조(1392~1910AD) 때의 봉화대와 같이 중국 동북부 지역 만주와 한반도에 산재한 유적지들의 소재지들을 확인하기 위해 위성영상을 적용했다. 이러한 유적지에 관한 정보는 여러 문헌들에서 접하게 되지만 이들 문화제의 실체들은 최근의 지역 개발 프로그램들에 의해 점차 사라지고 있는 실정이다. 이번에 답사하면서 측정한 위성위치정보(GPS) 자료를 사용하여 위성영상에서 일부 역사 유적지들의 위치를 확인해 보았다. 이들의 상세한 위치 정보는 좀 더 확인이 필요할 것으로 판단된다.
Satellite imagery was applied to locating archeological sites and remains around northeastern areas of China, called as Manchuria, and Korean peninsular, such as Mountain Fortress of Goguryeo Dynasty era(37BC~771AD), and firing torch and smoke beacon signal sites at mountain tops in Josun Dynasty era(1392~1910AD) as well as burial sites below the ground level in the modern era. Information on archeological sites, fire posts and burial places could be found in various literatures, but real figures of such cultural assets have been disappearing due to land development programs and human activities in recent years. Some of these historical sites were identified in satellite images using GPS(Geographical Positioning System). Real locations of these sites would be further necessary to be verified.
The introductory study for MIMO techniques over satellite systems
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.80-84
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
본 논문에서는 MIMO (multi input multi output) 기술의 위성 통신에 적용을 위한 연구에 대해 논하고자 한다. 위성은 광역 커버리지의 장점을 활용하여 DVB-S/S2, DVB-SH와 같은 방송 서비스 및 지상망 커버리지외각에 대해 음성 및 데이터 fill-in 서비스 제공하여 왔다. 한편 최근의 지상망은 MIMO 기술을 적용하여 높은전송 효율 및 전송 커비러지를 넓히는 것을 가능하게 하였다. 이러한 관점에서, 위성 시스템의 지상망과의 효율적인 공존 및 4세대 통신에서 요구하는 유비커터스 환경에 부합하기 위해서는 지상망의 핵심 기술인 MIMO 기술의 위성 시스템 적용을 위한 연구가 필요하다. 이에 본 논문에서는 위성 및 IMR (intermediate modulerepeater) 환경에서의 효과적인 MIMO적용을 위한 여러 시스템 시나리오들을 소개하고 각각의 시나리오 모델에서 필요로 하는 기술적 요구사항 및 적용 가능성에 대해 논하고 대략적인 실험 결과를 통해 그 가능성을 확인 하고자 한다. MIMO기술은 크게 Space time coding (STC)기법과 Spatial multiplexing (SM) 기법으로 나눌수 있는데, 위성 통신에서는 STC 의 위성 및 IMR환경에서 전송 효율 및 IMR cell 커버리지를 증가 시키기 위해 사용되었으며, SM의 경우 IMR환경에서 위성에서 전송된 방송 외에 IMR cell지역의 지역 방송을 multiplexing 하기 위한 형태로 형태로 활용 되었다.
In this paper, the introductory study of the multi input multi output (MIMO) techniques for satellite communication systems is presented. Because of the advantage of wide coverage of satellite, it has been considered for broadcasting services and fill-in services. On the other hand, state of the art multi input multi output (MIMO) techniques such as space time code (STC) and spatial multiplexing (SM) makes the terrestrial system increase link performance and their coverage, and also increase the link throughput. For these regard, in order to satisfy the requirements of the next generation communications and coexists with terrestrial systems harmoniously, the studying about satellite MIMO techniques is necessary. In this paper, we introduce some system model and scenarios to apply MIMO technique to intermediate module repeater (IMR). The possibility of these techniques and technical requirements are also considered. Especially, Space time code is used to enhance IMRs coverage and increase the link performance, and space time multiplexing is utilized to multiplex satellite broadcasting signals with local broadcasting signal in IMR cell.
End-to-End Soft QoS Approach for IMS-based Integrated Satellite/Terrestrial Network Architecture
한국위성정보통신학회 한국위성정보통신학회논문지 제2권 제2호 2007.12 pp.85-91
※ 기관로그인 시 무료 이용이 가능합니다.
4,000원
The satellite networks provide global coverage. The integration of terrestrial networks with a satellite network is the most attractive approach to develop a global communication system. The IP Multimedia Subsystem (IMS) is intended to be the system that will merge the internet with the telecom world. A user with a dual-mode terminal can access both the satellite network and terrestrial network. The seamless handoff between two networks and a user’s QoS level is the major issue concerning this integration. In this paper, we propose IMS-based satellite/terrestrial integrated network architecture for a global communication system. Based on the proposed architecture, an inter-network handoff and end-to-end soft QoS procedure is discussed. Our proposed soft QoS scheme is also analyzed to calculate the number of rejected calls.
0개의 논문이 장바구니에 담겼습니다.
선택하신 파일을 압축중입니다.
잠시만 기다려 주십시오.