Earticle

This article describes developments in fiber to the home (FTTH), and introduces the technical reviews for the various types to realize FTTH. Also, we have presented the results of each EPON, GPON and WDM-PON standardization by each IEEE, ITU-T and TTA. Finally, based on the above results, we proposed the trend of FTTH service deployment strategies.

DWDM(dense wavelength division multiplexing)-PON technology is applied to subscriber network as the same as EPON or G-PON. And its network components consist of OLT, ONU and RN. Legacy DWDM technologies have been applied on the long-haul part of optical network due to its excessive high cost. But many researchers have successfully devised a few methods which can considerably reduce the cost of equipment. Nowadays DWDM-PON equipment’s has arrived to a level having a competitive price in comparison to E-PON or G-PON on condition of giving equal bandwidth. Recently a major domestic ISP has deployed DWDM-PON equipments in one apartment complex area in the purpose of satisfying ever-increasing bandwidth demand. The ISP increased data transmission capacity from 1 G to 16G without any additional fiber deployment. In this paper we introduce roughly three technologies of implementing DWDM-PON’s optic module and related optic devices. And we also describe pre-test of vendor’s DWDM-PON equipment and discuss the result. Lastly we propose some of network configurations which adopt DWDM-PON technology. By adopting DWDM-PON technology ISP can greatly save the cost of deploying broadband subscriber network.

We propose a PON repeater system which transports multiple PON channels at the same time over the physical limit of the standard E-PON reach. To increase the physical reach up to 60km, we used the O-E-O (optic-electric-optic) signal regeneration on an active remote terminal which is placed between a central office and passive remote nodes. Also, by incorporating the wellestablished WDM technology to aggregate multiple E-PON channels, we successfully increased the split ratio (the number of subscribers per fiber core) to over 256.

최근 통신시스템과 핸드폰, PDA등의 통신기기들의 발전에 따라 사용자들은 높은 데이터 전송률과 고속의 통신서비스를 요구하고 있다. 이러한 상황에서 유·무선 통합 시스템인 Radio-over-Fiber(RoF) 시스템은 그 대안으로 대두되고 있다. 본 논문에서는 광전자소자를 선 왜곡 방식에 적용하여 광 송신기의 선형성을 향상시키는 방법을 제안하였다. 선 왜곡 방식은 두 개의 루프로 구성되어 있으며, 광 부품인 레이저 다이오드와 포토 다이오드 그리고 RF 부품인 위상변위기, 감쇄기, RF 결합/분배기, RF 증폭기를 사용하였다. 메인 루프에서 주 레이저 다이오드의 비선형성에 의해 발생된 왜곡신호성분은 보조 루프에서 부 레이저 다이오드를 이용하여 추출된 선 왜곡신호에 의해서 제거된다. 제안된 선형화 기법을 적용하여 2.4 GHz에서 선형화 기법을 적용하기전보다 3차 상호변조 왜곡성분이 약 30 dB 향상된 결과를 얻었다.

KT는 기업대상 전국대표번호서비스(예: 1588, 1577 등)와 기업이 보유하고 운용중인 콜센타 서비스를 통합한 새로운 부가서비스를 기업고객에게 제공하여 기업 콜센타의 인바운드 및 아웃바운드 호처리를 효율화하고, 고객사에게 일원화된 고객 접점 센터 구축을 통한 One-Contact, One-Stop서비스 구현 가능하게 함은 물론 기업고객측 회선, 장비 등에 대한 투자 및 운용비용을 절감할 수 있게 하고 있다. 이를 위해 KT에서는 기업 콜센타 구축시 다양한 구축환경(예: 고객사 CTI 미들웨어)과 고객사가 보유한 멀티사이트 콜센타에 적합하도록 지능망 개선 및 효율적인 시스템간 접속환경 제공으로 변화하는 기업 콜센타 고객의 니즈에 맞는 유연하고 강력한 서비스를 제공하고 있다. 본 논문에서는 기업형 콜센타 솔루션에 관한 통신사업자별 제공 기술 및 현황, KT에서 제공중인 콜센타 제공 구조에서의 지능망 제공 요소와 고객사 콜센타와의 망간 시스템 연동관계를 분석하고, KT에서 콜센타 부가서비스기반 호 제어하에서 제공하고 있는 기업의 콜센타 유형별 구축방안을 실제 적용 사례를 기반으로 제시하고 이에 따른 최적의 콜센타 구축방안을 제시한다.

The standardization for Seamless IP Mobility between heterogeneous networks is being progressed according to each specific purpose of the organizations such as ITU-T ((International Telecommunications Union– Telecommunication), 3GPP(3rd Generation Partnership Project), IETF(Internet Engineering Task Force), and IEEE(Institute of Electrical and Electronics Engineers). [1] Specially VCC (Voice Call Continuity) for seamless voice continuity between heterogeneous networks using IMS (IP Multimedia Subsystem) of the next generation platform is being introduced into a few companies, and also MIH (Media Independent Handover) and MIP (Mobile IP) for IP mobility between heterogeneous networks are being customized by their internal situation. This article describes the idea to support IP Mobility between heterogeneous networks in the network which IMS platform is deployed and only supports the mobility for the voice by the type of AS (Application Server).

We study signal characteristics of the injection-locked Fabry-Perot laser diodes(FP-LDs) for the development of a costeffective WDM-PON solution. The output power and system performance of WDM-PON using injection locked FP-LD are depend on optical characteristics of injection source. The effect of optical power and polarization state of the injection source experimentally investigated. We also measured BER characteristics of the directly modulated FP LD and its power penalty at the BER of 10-9.

유비쿼터스 도시의 개념이 등장하면서 도시관리에 대한 중요성이 점차 부각되어가고 있다. 특히 지하시 설물에 대한 안전한 관리는 안전한 도시를 표방하는 유시티 에서는 없어서는 안될 중요한 공공서비스라 할 수 있다. 최근 이러한 도시의 지하시설물의 안전한 관리를 위한 체계적인 관리 방안에 대한 연구가 국토해양부를 중심으로 활발히 이루어 지고 있다. 지하시설물의 특성상 안전하고 체계적인 관리를 위해서는 무엇보다 지하시설물에 대한 정확한 위치좌표를 알아야 하고 지하시설물에 일어나는 변화에 대한 정보를 수집하기 위해 센서적용기술을 필요로 한다. 본 논문에서는 유비쿼터스 도시 내 지하시설물 구축과정에서의 절대위치확보 방안과 각 지하매설물별 특성을 고려한 센서적용방안에 대한 내용을 기술하였다.

사용자의 각 개인별 관심 및 환경에 따라 적절한 정보를 다양한 입출력 방식으로 제공하고, 가정내의 모 든 장소에서 네트워크 접속이 가능한 사용자 중심의 지능형 홈 네트워크 환경의 새로운 요구가 대두 되고 있다. 또한 집안의 온도, 가스, 화재, 도어, 적외선 센서들로부터 수집된 정보를 요약, 분석, 처리 가공하여 문자 및 그래픽 등으로 보고 받는 사용자 중심의 서비스 제공이 요구 된다. 이에 본 논문은 전력선 통신 (Power Line Communication, PLC)을 이용한 홈 네트워크 시스템을 구축하여 가정내의 온도, 화재, 침입방지 등의 보안 문제뿐만 아니라 정보가 전기기들이 네트워크로 상호 연결되어 기기, 시간, 장소에 구애 받지 않는 다양한 서비스의 제공이 가능하며, 중앙의 홈 서버를 통해 집안 전체의 관리가 가능한 안전하고 스마트한 자동화 서비스를 제공하는 환경을 구축한다

This paper describes some field multiplication algorithm over GF(2m) on 8-bit processor. Through performance comparisons among algorithm, we show that our proposal is faster than existing algorithms. The proposed algorithm save 26.38% of running time compared with naive comb multiplication algorithm which is a kind of lookup-table (LUT) based algorithm. With the proposed algorithm, a scalar multiplication over GF(2163) can be computed within 1.04 secs on 8-bit MICAz sensor mote.

This paper shows an implementation of WLAN-based Audio/Video(A/V) system for multimedia home networks. Proposed WLAN-based A/V system can transmit multimedia data of high quality. The entire system consists of a 16-bit RISC controller, a program ROM, a SRAM, timers, an interrupt controller, a UART, GPIOs, an I2C and the OFDM modem supporting for the IEEE 802.11g standard. The simple MAC functions are implemented by firmware on an embedded 16-bit RISC controller. The OFDM modem supports a complete set of data rates up to 54Mbps. Proposed the system is implemented by an Altera FPGA EP1S60F1020C6 device, a 10-bit 2-ch DAC, a 10-bit 2-ch ADC and RF/IF chips.

Recently, the development of u-City and u-City services have been actively pursued by individual local government bodies in South Korea. This study focuses on the development of u-Health service, one of the services of u-City, by studying u-Health services in development (domestic and foreign) and by analyzing and proposing the communication infrastructure required to provide such services. Mainly, this study will focus on analyzing the current trend in personal mobile device based u-Health services domestically and internationally, and propose a new type of u-Health service, u-Diet service. The study will introduce the architecture, service scenario, technologies, characteristics, and the business model for the u-Diet service. It is expected that this study will provide the guideline for developing new u-Health services.

Convergence services are very important to mobile operators in next generation mobile networks. However, mobile operators cannot deal with all convergence services because there are numerous convergence services. Thus, they should select and develop main technologies to provide convergence services which are areas to grow our business. In this paper, we introduce basic technologies to provide convergence services and then present some evaluation models to select an important area and technology.

In the block cipher, DPA-resistant masking methods make an appropriation of extremely high cost for the non-linear part. Block ciphers like AES and ARIA use the inversion operation as this non-linear part. This make various countermeasures be proposed for reducing the cost of masking inversion. In this paper, we propose the efficient masking inverter by rearranging the masking inversion operation over the composite field and finding duplicated multiplications.

The primitive of Identity-Based Broadcast Encryption allows a sender to distribute session keys or messages for a dynamically changing set of receivers using the receiver's identity as a public key. We already know that the trade-off exists the efficiency between the public parameter size and the ciphertext size. So, if the ciphertext size is O(1) , then the public parameter size may be O(n) . Some of IBBE scheme take the public parameters as input in decryption phase. Thus, a decryption device (or client) has to store the public parameters or receive it. This means that a decryption device (or client) has to have the proper size storage. Recently, delerable proposed an IBBE which have the O(1) size ciphertexts and the O(n) size public parameters. In this paper, we present an IBBE scheme. In our construction the ciphertext size and the public parameter size are sub-linear in the total number of receivers, and the private key size is constant.

IP-based mobile communication system is one of the key research items in the mobile networks for a long time. But, due to some technical issues and no need of markets, it is still not full-fledged. Recently, CDMA and WCDMA service providers want to introduce IP-based network connectivity. Even though their efforts, the main network infra-structure depends on ATM or HDLC technology. This article describes a good example of commercialization of IP-based mobile communication systems. Our research is not experimental system but a in-service system – replacing the existing equipments with new IP-based systems. In this paper, we introduce IP related technologies used in our research such as IP-based ATCA(Advanced Telecommunications Computing Architecture) platform, HA(High Availability) redundancy, IP multicast, network redundancy techniques, multi-link bundling and IP header compression. These are already well-known to internet domain. We mix them with mobile communication systems concretely.

와이브로(WiBro), 3G 무선인터넷(HSDPA), 3G LTE 등과 같은 와이어리스 브로드밴드(Wireless Broand) 기술이 점차 성숙됨에 따라 이들 망을 활용한 다양한 무선인터넷 서비스를 제공하려는 사업자들이 증가하고 있다. 기존의 WLAN, 2G/3G 회선망에서의 제한된 이동성 및 네트워크 전송 속도를 개선한 와이어리스 브로드밴드 서비스 시장은 국내에서도 2006년부터 WiBro및 HSDPA가 사용됨에 따라 사업자간의 경쟁도 본격화되고 있다. 이러한 환경 속에서 사업자들은 신속하고 편리한 서비스 개통과 스마트폰, USB모뎀, 노트북, UMPC, PMP 등 다양한 단말들의 펌웨어 업그레이드, A/S 처리 방안에 대해 고심을 하고 있으며, 이들 문제점은 막대한 비용과 고객 민원을 야기시키는 요인이기도 하다. 따라서 경제적인 관리비용으로 동적인 서비스/펌웨어 업그레이드 및 A/S에 대한 고객 만족도를 높이기 위한 단말 원격 관리 필요성이 절실히 요구된다. WiBro 단말의 안전하고 효율적으로 관리하기 위해서는 단말과 기지국사이의 무선구간에 대한 보안(security)을 강화시켜 줄 수 있으면서 이동성(mobility)을 고려한 OMA DM 프로토콜을 이용하는 것이 적합하다. 또한, WiBro에서 가입자 인증을 채택하고 있는 UICC의 관리를 위해서 3GPP에서 정의하는 SMS/MMS기반의 또는 BIP(Bear Independent Protocol)기반의 OTA기술을 병행하여 사용하여야 한다. 본 논문에서는 Wi-MAX단말 관리를 위한 OTA Provisioning 규격으로 OMA DM과 TR069이 WiMAX 단말을 위하여 어떻게 적용하도록 규정하고 있 는지를 살펴본다. 특히, WiBro 가입자 인증뿐만 아니라 폰북, DRM, 금융서비스 등 다양한 부가 서비스를 위하여 사용되는 UICC의 원격관리를 위한 관리 요소들을 정의, 설계하고 이를 바탕으로 구현된 KT UICC OTA Provisioning시스템을 소개한다.

현재 통신 시장의 상황은 유무선 통신서비스 시장의 포화, 이동통신 시장의 기존 유선전화 규모 초과, 그리고 유선통신의 서비스 사업자의 영역 확대 도모 등을 특징으로 한다. 유무선 통합 (Fixed Mobile Convergence, FMC)서비스는 유선통신 사업자를 중심으로 한 비즈니스 모델로 사용자에게 유무선 통신망 종류에 상관없이 일관되고 끊김없는 서비스를 제공하는 것을 목표로 한다. 이동통신망까지 확대하여 고객 기반을 유지하고자 하는 유선사업자들은 FMC 서비스 중 하나의 방안으로 IMS (IP Multimedia Subsystems) 기반의 VCC (Voice Call Continuity) 기능에 주목하고 있다. VCC AS (Application Server) 는 이종망 (WiFi-CDMA)간 Seamless 핸드오버기능을 수행하므로, WiFi 와 CDMA를 지원할 수 있는 듀얼단말을 이용하여 사용자가 WiFi 서비스 지역과 CDMA 서비스 지역간 이동시에도 eamless 한 음성서비스를 제공한다. 이에 본 논문은 IMS/VCC 기반으로 음성 seamless 핸드오버 적용 사례(시범서비스)를 중심으로 유무선 통신사업자 상호 Win-Win을 추구할 수 있는 LG데이콤 특화 VCC 모델을 제시한다. 그리고 LG데이콤이 추구하는 차세대 서비스인 사용자 context 기반의 개인화된 서비스 제공을 위한 IMS 기반 통합 프로파일/인증/과금 연구 동향에 대해 간략히 소개한다

Many different types of network equipments are deployed in a large-scale IP network. In this operating environment, network service providers suffer from difficulty in controlling various equipments simultaneously in case network faults happen in their overall or regional network due to physical link failure or abnormal traffic. This paper presents a policy-based methodology to control many different types of network equipments at the same time in abnormal cases. The key idea is that NMS(Network Management System) keeps vendor-neutral control policies in normal times and that when an abnormal case occurs in network, NMS transforms the selected policy into vendor-specific control commands and enforces them to various equipments simultaneously.

홈 네트워크내에서 Always-on 기기 특성으로 인하여 불필요한 에너지를 소비하는 경우가 전체 소모전력량의 60%이상을 차지한다. 그러므로 이러한 에너지 소비를 줄일 수 있는 방안에 대한 연구의 필요성이 점차 증대되고 있으며, 본고에서 연구한 Ethernet기반의 트래픽량에 의한 대기모드 전환 알고리즘은 에너지 절감에 매우 유용한 연구기술이라 할 수 있다. 이에, 본고에서는 idle time때의 네트워크 에너지 소비를 절감하기 위한 대기전력 지원형 Green Ethernet Gateway시스템설계 및 구현방안과 시스템 대기모드상태를 최대한 연장하여 energy efficient효과를 향상시키기 위한 Proxying 기반 control policy를 제안한다. 일반적으로 홈네트워크의 네트워크 연결은 ethernet을 중심으로 이루어지며, 대부분 게이트웨이를 기반으로 그 연결이 구성된다. 그러나 홈네트워크의 일반적인 동작시간이 8시간 내외인데도 불구하고, 네트워크 연결을 위해서 full Power 상태를 유지해야 하는 기존의 energy unaware기반의 게이트웨이 구조로는 에너지측면에서 막대한 에너지 낭비를 초래한다. 이에 본고에서는 게이트웨이에서의 에너지 절감을 위한 트래픽량 기반의 대기모드 지원형 시스템을 구현하고 실제 홈네트워크 적용을 통한 에너지 절약효과를 실험한다. 또한 활성모드, 대기모드간 전환을 효과적으로 하기 위한 layer 2,3 Packet기반의 지능형 Proxying 알고리즘을 이용한 control policy를 제안한다.

IEEE 802.11e standardized the EDCA mechanism to support the priority based QoS. And the virtual collision handler schedules the transmission time of each MAC frame using the internal back-off window according to the access category(AC). This can provides the differentiated QoS to real-time services at the medium traffic load condition. However, the transmission delay of MAC frame for real-time services may be increased as the traffic load of best effort service increases. It becomes more critical when the real-time service uses a compressed mode video codec such as moving picture experts group(MPEG) 4 codec. That is because each frame has the different importance. That is, the I-frame has more information as compared with the P- and the B-frame. In this paper, we proposed a buffer management algorithm based on the frame importance and the delay bound. The proposed algorithm is consisted of the traffic regulator based on the dual token bucket algorithm and the active queue management algorithm. The traffic regulator reduces the transmission rate of lower AC until that the virtual collision handler can transmit an I-frame. And the active queue management discards frame based on the importance of each frame and the delay bound of head of line(HoL) frame when the channel resource is insufficient.

Cognitive Radio (CR) technology is proposed for using the unused spectrum band efficiently because of the spectrum scarcity problems. Spectrum sensing is one of the most challenging issues in cognitive radio system. In this paper, we focus on the signal detection of WiBro system band. As most of the modulated signals can be treated as cyclostationary random process, we can detect the signal of the OFDM signals in WiBro system. OFDM symbols using WiBro system have several pilot subcarriers and periodic pilots have cyclostationary characteristic. To improve of the detection performance, we get diversity gain using multiple antennas.

Multiple antenna technology, such as multiple input multiple output (MIMO), beamforming is one of the most promising technology for broadband wireless communication. In OFDM environment, we found that as the number of paths is increased, smart antenna system cannot fully exploit beamforming gain. In this paper, we propose a beamforming scheme and analyze the performance of the proposed beamforming scheme in WiBro smart antenna system. WiBro is an OFDMA-based multiple access service for wireless broadband multimedia environment. The proposed beamforming technique for WiBro smart antenna system can effectively improve the performance of the systems in multipath fading environment.

OFDM (Orthogonal Frequency Division Multiplexing) modulation using the orthogonal subcarriers reduces the delay spread by increasing robustness to multipath fading and can use overlapped bandwidth due to orthogonality on frequency domain. Thus data rate and spectral efficiency are increased. Because of these reason, OFDM is used for high speed data transmission for multimedia transmission as HSDPA, WiBro, WLAN. However OFDM also has drawbacks that have the high PAPR (Peak to Average Power Ratio). This high PAPR takes place because of parallel processing a number of data at once using a FFT processor. By high PAPR, amplifier doesn’t act in dynamic range, so that BER performance is worse. In this paper, we reduce the PAPR using SLM(Selective Mapping). SLM doesn’t effect on BER performance, but should transmit the side information for demodulation [2]. Also PAPR is higher as the number of FFT processor is larger. Thus SLM has high complexity. In this paper, we analyze the performance of SLM using scaling for no side information.

Recently WiBro network is installed for high speed wireless internet service by telecommunication service provider, however WiBro service is not provided in the region of mountain or difficult region to install network infra. Fixed repeater is used to resolve those shadow area problem in current WiBro network. This paper study introducing Ad-hoc based multi-hop relay instead of using fixed repeater in order to resolve those shadow area problem. Cost down of fixed repeater and active network expansion is possible to resolve shadow area problem by introducing multi-hop relay technology.

Cyclic prefix (CP) is one of the most important technique to OFDM system and is reducing inter-symbol interference (ISI) effects in high speed wireless mobile communication system. At the time varying channel condition, however, fixed CP length is not only increasing power consumption but also reducing data transmission rate. So in this paper, we propose the system that has adaptive CP length for high speed data transmission system. We don’t control CP length of every symbol but adjust symbol interval depending on channel condition to CP reconstruction.

In this paper, the high efficiency and linearity Doherty power amplifier using DGS and adaptive bias technique has been designed and realized for 2.3GHz WiBro applications. The Doherty amplifier has been implemented using silicon MRF 281 LDMOS FET. The RF performances of the Doherty power amplifier (a combination of a class AB carrier amplifier and a bias-tuned class C peaking amplifier) have been compared with those of a class AB amplifier alone, and conventional Doherty amplifier. The Maximum PAE of designed Doherty power amplifier with DGS and adaptive bias technique has been 36.6% at 34.01dBm output power. The proposed Doherty power amplifier showed an improvement 1dB at output power and 7.6% PAE than a class AB amplifier alone.

In this paper, we introduce a platform of advanced multiple antenna system based on orthogonal frequency-division multiplexing (OFDM). The advanced multiple antennas have beamforming gain using array antenna. In array antenna systems, received signal has phase delay caused distance of each antennas, therefore it should compensate with optimum weight vector which calculated by Lagrange algorithm. To implement the presented above procedures using Digital Signal Processor (DSP), we should fixedpoint design. The performance of implemented platform is verified through MATLAB® simulations with various signal environments.

This paper presents the design and analysis of 2.45GHz Low-IF Mixer using CMOS 0.18um. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique, and the resonating technique for the tail capacitance. And the design of this Double Balance Mixer is based on its lineaity since it is important in the interference cancellation system. The low flicker noise mixer is implemented by incorporating a double balanced Gilber-type configuration, the RF leakage-less current bleeding technique, and Cp resonating technique. The proposed mixer has a simulated conversion gain of 16dB a simulated IIP3 of -3.3dBm and P1dB is -19dBm. A simulated noise figure of 6.9dB at 10MHz and a flicker corner frequency of 510kHz while consuming only 10.65mW od DC power. The layout of Mixer for one-chip design in a 0.18-um TSMC process has 0.474mm x 0.39 mm size.

This paper presents the program to analyze an antenna for using the Moment Method. The program contains three different functional steps. In the first stage, the pre-processor is based on the Delaunay Triangulation Algorithm. The next stage, the main-processor, can be considered the core process of the program, which solutions are obtaining the linear matrix for using the Moment Method. The final stages, the name of the post-processor, analyze radiation patterns, which results are same with the S-parameters. The results demonstrate satisfactory agreement with the results for using other numerical packages and measurement data. We can confirm that the results of this program compare with the results of common program to analyze for an antenna.