Earticle

The Second Phase New Town development is in process, since 2000. So, the evaluation on the on going project is not proper. However, the planning indices, planning tools, and ways of developments can be compared, between the First Phase and Second Phase New Towns. The level of physical environments is actually advanced, than that of the First Phase, especially the planning techniques such as eco-planning, mass transit, and U-city planning are strikingly advanced.However, the reconfiguration of spatial structure in SMA, land compensation and management of the bordering area, sharing of infrastructure cost, and the provision of rental housing is still debating issues.

Recently, bottom-up information systems (BUIS), developed according to the requirements of individual user departments, have become popular. However, effective management of BUIS projects is not enough, with many organizations having experienced integration challenges with such individual projects. BUIS projects are relatively small and limited in scope, as opposed to the large, complex systems developed through traditional top-down information system development projects. Due to these differences in characteristics, the control modes as well as the aspects to improve development performance in each type of project are also different. Therefore, it is difficult to apply the results of prior research on control in system development projects to improve BUIS project performance. The purpose of this study is to derive a new theory of control to improve BUIS project performance. The results contribute to the improvement of firm performance through effective control of BUIS projects in modern enterprises.

정보 매체로서 자리잡은 인터넷은 초고속정보통신망을 통한 종합정보통신망이 된다는 것은 이제 기정 사실이 되었다. 교육 분야에서도 많은 변화를 가져왔고, 점차 가르치는 교수중심에서 배우는 학습자 중심으로 변모해가고 있으며 전통적인 교실에서의 수업보다도 공간과 거리감에 구애를 받지 않는 가상공간(cyberspace)이라는 인터넷을 통하여 가상대학(cyber university)을 설립하게 되었다. 따라서 본 연구는 급속히 변화되는 교육환경에서 교육정보서비스의 개선과 사용자중심의 디자인을 제공하기 위한 방법으로서 WDS (Web Identity Development System)을 적용한 웹사이트디자인을 개발하였다. 그리하여 WDS 적용한 웹사이트 개발 모델를 통하여 가상공간에서 보다 개선된 홈페이지디자인 개발을 위한 방안을 제안하고자 한다.

It has been a well known fact that the Internet as a information media has became a obvious ISDN(Integrated Services Digital Networks) through ultra speed information networks. Internet has mads a great change in educational fields. The educational systems are being changed into a learner central figure from the professor central one and cyber universities regardless of space and distance have appeared though the Internet. Accordingly in this paper, we present the web site of UC(Ulsan College) applied to WIDS(Web Identity Development System) to supply the enhancement of information services and the interface design of user's convenience in rapid changing educational environment. We suggest the more enhanced methodology of web site development in cyber space through the case of UC web site development.

This paper designed and developed internet based competency developing system for small IT (Information & Technology) companies. The purpose of this system was to provide career development opportunities to small IT business workers for their longstanding employment and self-improvement job skills. This study analyzed job competencies based on job descriptions from two IT companies. The survey was conducted to analyze employees' self-assessed current job competency level and effective ways of improving their current level of competencies. From the results of survey, most of subjects indicated their job competencies were in between mid-level to low level, and they required the need of training programs to improve their job knowledge and experience. Based on the interview from field experts about job competency development, this study designed and developed the internet based competency development system to provide effective and efficient way of improving job competencies and needed training programs for small IT business employees.

본 논문은 비행 정보 등 각종 운항 자료를 보다 다양하게 분석하고, 좀더 쉽게 이해하기 위하여 시각적으로 구현할 수 있는 비행정보 분석시스템 개발에 대한 개념 설계서이다. 비행이 완료된 후, 항공기에 탑재된 비행 데이터 저장 장치(QAR, Quick Access Recorder)로부터 비행 및 관련 시스템 데이터를 추출한 후, 이 데이터를 변환한다. 또한 변환된 데이터를 이용하여 각종 비행 및 시스템 정보 분석과 운항 궤적 및 ND, PFD 등 조종실 내 운항 시스템들의 상황을 운항 시와 동일하게 3차원 그래픽으로 재현하는 시스템을 구축하였다. 이는 시스템 분석 및 안전, 표준 운항 체계 구축에 도움을 줄 수 있으며 유사 관련 분야로의 확대도 가능하다.

A system for evaluating streamflow data (KORSAS) was developed, and is operated using PC based Windows to help the hydrological observation practitioner's working in Korea Water Resources Corporation (KOWACO). This system has modules including; DB access and data management, flow measurement arranging, H-Q relation deriving, area rainfall calculating, flow calculating, and flow evaluating modules. Evaluation of observed streamflow is accomplished through the following processes. First, hourly streamflow data is calculated from water level data stored in a DB server by applying the rating relationship between water level and flow rates derived from the past flow measurements. Second, hourly areal rainfal data is calculated from point data stored in the DB server by applying Thiessen networks. Third, hydrographs are displayed on a daily, weekly, monthly, or seasonal duration basis, and are compared to hydrographs of reservoir inflow, hydrographs at water level observation stations and hydrographs derived from simulated results using models.

It is widely recognized that increasing the accuracy and diversity of rotating machinery necessitates an appropriate diagnostic technique and maintenance system. Until now, operators have monitored machinery using their senses or by analyzing simple changes to root mean square output values. We developed an expert diagnostic system that uses fuzzy inference to expertly assess the condition of a machine and allow operators to make accurate judgments. This paper describes the hardware and software of the expert diagnostic system. An assessment of the diagnostic performance for five fault phenomena typically found in pumps is also described.

This paper proposes an algorithm that automatically converts images into Pipo, painting images using OpenCV-based image processing technology. The existing "purity," "palm," "puzzling," and "painting," or Pipo, painting image production method relies on manual work, so customized production has the disadvantage of coming with a high price and a long production period. To resolve this problem, using the OpenCV library, we developed a technique that automatically converts an image into a Pipo painting image by designing a module that changes an image, like a picture; draws a line based on a sector boundary; and writes sector numbers inside the line. Through this, it is expected that the production cost of customized Pipo painting images will be lowered and that the production period will be shortened.

국제적으로 기후변화에 대한 대응 및 생물다양성 증진 방안이 대두되면서 국내 정부 및 공공기관에서는 수변구역 등 법정 보호지역 내 생태계를 보전하고 수질개선을 위해 사유지를 매수하여 보전·복원사업을 추진하고 있으나, 매수시스템 체계가 미흡하여 다양한 문제점을 초래하고 있다. 이에 본 연구에서는 동강유역 생태·경관보전지역을 중심으로 생태성 평가를 통한 효율적이고 체계적인 토지매수시스템을 개발하였다. 생태성 평가는 필지단위의 평가와 권역별 평가를 통합하여 생태성 평가모형을 개발하고, 생태기능 종합등급을 설정함과 동시에 현장검증을 통해 최종 등급화 하였다. 88필지의 매수토지에 대해 검증한 결과, 85.2%이상의 비교적 높은 일치성을 보였으며 불일치한 필지는 생태성 평가와 현장검증시 계절의 차이로 식생 고사, 경작물 수확 등 영향이 있었던 것으로 나타났다. 매수시스템은 멸종위기종과 핵심생태계에서의 거리를 기준으로 생태성 평가등급에 따라 1순위에서 9순위까지 순위를 선정하였으며, 동강유역 거운리, 문산리, 덕천리, 운치리, 귤암리, 가수리의 사유지를 대상으로 총 68필지에 대해 현장 검증 결과, 5순위까지 매수 우선순위가 체계적으로 도출되었다. 본 연구는 생태평가에 기반한 체계적인 토지매수시스템을 구축 및 제안함으로써 향후 보호지역 내 매수토지의 보전과 복원 및 생태적 관리에 일조할 것으로 기대된다.

With the increasing attention of the international community on climate change and biodiversity promotion programmes, the Korean government and public agencies are trying to protect and restore the ecosystem of areas protected by law, such as waterfronts, by acquiring private land. However, the inadequate purchase system has caused various problems. In this study, an efficient and systematic land purchase system was developed through ecological evaluation, focusing on the ecological and landscape conservation areas of the Donggang basin. The ecological evaluation was developed by integrating parcel-level evaluation and regional-specific evaluation, and the overall level of ecological function was established and finalized through on-site verification. As a result of verifying the purchase land of 88 parcels, it showed a relatively high agreement of more than 85.2%, and the rest of parcels (non-agreement) were considered to have had an impact on vegetation, crop harvesting, etc. due to seasonal differences in ecological evaluation and field verification. The purchasing system was ranked according to the ecological evaluation grade based on the endangered species and the distance from the core ecosystem. As a result, the purchase priority was systematically drawn up to the 5th rank for a total of 68 parcels for the private lands of Geoeun-ri, Munsan-ri, Deokcheon-ri, Unchi-ri, Gumam-ri, and Suji-ri. This study is expected to contribute to the preservation, restoration and ecological management of purchased land in the protected area in the future by establishing and proposing a systematic land purchase system based on ecological evaluation.

Existing web applications and services have historically been implemented using JavaScript. However, new technologies such as artificial intelligence, the Internet of Things, and Big Data are being developed as part of the Fourth Industrial Revolution. With the definition of the HTML5 web standard, services (such as the technologies mentioned above) that were previously not available through the Web become available. These services, however, need to have the same performance as native applications, and implementing these services will require new technologies. Therefore, additional tools that can work on the Web with native performance are needed. In this paper, a system for branching processing was established using JavaScript and WebAssembly, a language that can operate on the Web. This system performs user requests in advance, and requests are branched in a language that produces faster results. Therefore, a service capable of quick response times can be implemented.

The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than $30{\mu}m$. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned glass is developed. The developed system, which is based on a line-scan mechanism, obtains information on the defects and sorts the defects by type automatically. The developed inspection system adopts a multi-vision method using slit-beam formation for minimum inspection time and the detection algorithm is embodied in the detection ability. Characteristic defects such as pin holes, substances, and protrusions are extracted using the blob analysis method. Defects such as open, short, spots and others are distinguished by the line type inspection algorithm. It was experimentally verified that the developed inspection system can detect defects with reliability of up to 95% in about 60 seconds for the 42-inch PDP panel.

A computer system for crop information was developed using Visual Basic and ArcGIS VBA. The system is operated on ArcGIS 8.3 with Microsoft Access MDB. Landsat +ETM, KOMPSAT-1 EOC, ASTER VNIR and IKONOS panchromatic (Pan) and multi-spectral (MIS) images were included in the system to extract agricultural land use items identifiable at various spatial resolutions of images. Agriculture related data inventories using crop cover information such as texture and average pixel value of each band based on crop cultivation calendar were designed and implemented. Three IKONOS images were loaded in the system to show crop cover characteristics such as rice, pear, grape, red pepper, garlic, and surface water cover of reservoir with field surveys. GIS layers such as DEM (Digital Elevation Model), stream, road, soil, land use and administration boundary were prepared to understand the related characteristics and identify the location easily.

This study developed a fully automated test system for pressure vessels, containing such as oxygen, nitrogen, which is widely used in many industries. The pressure vessel test has three major parts including weight measurement test, water-hydraulic test and leakage test followed by cleaning and drying. The control system for these tests consists of three parts: a PLC, a monitoring system and a database management system. The PLC oversees overall control of test machines, while the monitoring system measures and displays weight, pressure, flow etc. for every situations, and the database management system stores test data. These three modules are designed to communicate with one another at 1 Hz frequency alerting problematic situations to the operator. The system has gone through actual field tests for verification of performances.

In order to analyze the water supply capacity in an estuary reservoir, a system composed of daily water balance model and daily inflow model was developed. The agricultural water demands to paddy fields, domestic water demands to residential areas, and industrial water demands to industrial complexes were considered in this daily water balance model. Likewise, the outflow volume through sluice gates and inside the water level at the start of the outflow was initially conditioned to simulate estuary reservoir storage. The DAWAST model (Noh, 1991) was selected to simulate daily estuary reservoir inflow, wherein return flows from agricultural, domestic, and industrial water were included to simulate runoff. Using this system, the water supply capacity in the Geum River estuary reservoir was analyzed.

This study designs a squat posture recognition system that can provide correct squat posture guidelines. This system comprises two modules: a Kinect camera for monitoring users' body movements and a Wii Balance Board(WBB) for measuring balanced postures with legs. Squat posture recognition involves two states: "Stand" and "Squat." Further, each state is divided into two postures: correct and incorrect. The incorrect postures of the Stand and Squat states were classified into three and two different types of postures, respectively. The factors that determine whether a posture is incorrect or correct include the difference between shoulder width and ankle width, knee angle, and coordinate of center of pressure(CoP). An expert and 10 participants participated in experiments, and the three factors used to determine the posture were measured using both Kinect and WBB. The acquired data from each device show that the expert's posture is more stable than that of the subjects. This data was classified using a support vector machine (SVM) and $na{\ddot{i}}ve$ Bayes classifier. The classification results showed that the accuracy achieved using the SVM and $na{\ddot{i}}ve$ Bayes classifier was 95.61% and 81.82%, respectively. Therefore, the developed system that used Kinect and WBB could classify correct and incorrect postures with high accuracy. Unlike in other studies, we obtained the spatial coordinates using Kinect and measured the length of the body. The balance of the body was measured using CoP coordinates obtained from the WBB, and meaningful results were obtained from the measured values. Finally, the developed system can help people analyze the squat posture easily and conveniently anywhere and can help present correct squat posture guidelines. By using this system, users can easily analyze the squat posture in daily life and suggest safe and accurate postures.

This study focused on realizing the UX pattern elements for Wordpress service, and applying the UX pattern approach to enhance UX consideration in Wordpress theme service. The Wordpress UX pattern system was developed based on web UX pattern analysis, and on characteristics of Wordpress components and theme filtering tags. The Wordpress UX pattern system was further analyzed in 22 popular Wordpress themes and 20 web UX scenarios, to evaluate its working by defining theme UX as a case study. The Wordpress theme filtering service GUI was designed based on the Wordpress UX pattern system as a design suggestion. Web technology is evolving rapidly, and web design has become a ready-made service with less user experience consideration, or design creativity. This study directs to keep track of UX value in an emerging web service paradigm.

A control rod device (CRD) nozzle attaches to the hemispherical surface of a reactor head with J-groove welding. Primary water stress corrosion cracking (PWSCC) causes degradation in these welds, which requires that these defect areas be repaired. To perform this repair welding automatically on a complicated weld groove shape, an auto-welding system was developed incorporating a laser vision sensor that measures the 3-dimensional (3D) shape of the groove and a weld-path creation program that calculates the weld-path parameters. Welding trials with a J-groove workpiece were performed to establish a basis for developing this auto-welding system. Because the reactor head is placed on a lay down support, the outer-most region of the CRD nozzle has restricted access. Due to this tight space, several parameters of the design, such as size, weight and movement of the auto-welding system, had to be carefully considered. The cross section of the J-groove weld is basically an oval shape where the included angle of the J-groove ranges from 0 to 57 degrees. To measure the complex shape, we used double lasers coupled to a single charge coupled device (CCD) camera. We then developed a program to generate the weld-path parameters using the measured 3D shape as a basis. The program has the ability to determine the first and final welding positions and to calculate all weld-path parameters. An optimized image-processing algorithm was applied to resolve noise interference and diffused reflection of the joint surfaces. The auto-welding system is composed of a 4-axis manipulator, gas tungsten arc welding (GTAW) power supply, an optimized designed and manufactured GTAW torch and a 3D laser vision sensor. Through welding trials with 0 and 38-degree included-angle workpieces with both J-groove and U-groove weld, the performance of this auto-welding system was qualified for field application.

A functional external fixator system for bone deformity near the joints using worm gear was developed for curing the angle difference in fracture bones while the lengthening bar was developed for curing the differences in length, also in fracture bones. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for bone deformity near joints. The FE model using compressive and bending FE analysis was applied due to the angle differentiations. The results indicate that compressive stiffness value in the experiment was 175.43N/mm, bending stiffness value in the experiment was 259.74 N/mm, compressive stiffness value in the FEA was 188.67 N/mm, and bending stiffness value in the FEA was 285.71 N/mm. Errors between experiments and FEA were less than $10\%$ in both the 'compressive stiffness and the bending stiffness. The maximum stress (157 MPa) applied to the angle of the clamp was lower than the yield stress (176.4 MPa) of SUS316L. The degree of stiffness in both axial compression and bending of the new fixator are about 2 times greater than other products, with the exception of EBI (2003).

A decision support system for determining reservoir capacity, named as KORESIDSS (KOwaco's REservoir SIzing Decision Support System), was developed. The system is composed of three subsystems; a database/information subsystem, a model subsystem, and an output subsystem. This system is operated using MS-Windows with a GUI (Graphic User Interface) system developed using Visual Basic 5.0. As a continuous runoff model, the DAWAST model (DAily WAtershed STreamflow model) developed by Noh(1991) was and its analysis module was developed. This system was applied to a newly-planned dam, the Cheongyan Dam, Which will be located in Cheongyang-Gun, Chungcheongnam-Do and it was proved to be applicable in determining reservoir storage.

Horse breeders suffer massive economic losses due to dystocia, abortion, and stillbirths. In Thoroughbred mares, breeders often miss the foaling process because approximately 86% of the foaling events occur from 19:00 to 7:00; consequently, breeders cannot assist mares experiencing dystocia. To solve this problem, various foaling alarm systems have been developed. However, there is a need to develop a new system to overcome the shortcomings of the existing devices and improve their accuracy. To this end, the present study aimed to (1) develop a novel foaling alarm system and (2) compare its accuracy with that of the existing Foalert™ system. Specifically, eighteen Thoroughbred mares (11.9 ± 4.0 years old) were included. An accelerometer was used to analyze specific foaling behaviors. Behavioral data were transmitted to a data server every second. Depending on the acceleration value, behaviors were automatically classified by the server as categorized behaviors 1 (behaviors without change in body rotation), 2 (behaviors with sudden change in body rotation, such as rolling over), and 3 (behaviors with long-term change in body rotation, such as lying down laterally). The system was designed to alarm when the duration of categorized behaviors 2 and 3 was 12.9% and that of categorized behavior 3 was 1% during 10 min. The system measured the duration of each categorized behavior every 10 min and transmitted an alarm to the breeders when foaling was detected. To confirm its accuracy, the foaling detection time of the novel system was compared with that of Foalert™. The novel foaling alarm system and Foalert™ alarmed foaling onset respectively 32.6 ± 17.9 and 8.6 ± 1.0 min prior to foal discharge, and the foaling detection rate of both systems was 94.4%. Therefore, the novel foaling alarm system equipped with an accelerometer can precisely detect and alert foaling onset.