Earticle

This study present that the deep structure is related to the bi clause, the derivation structure to the control structure, and the surface structure to the mono clause. Furthermore, the semantics is related to the atelic of the Japanese [-temiru] sentence.

An attempt to derive the surface temperature from the Korea Multi-purpose Satellite (KOMPSAT)-3A mid-wave infrared (MWIR) data acquired over the southern California on Nov. 14, 2015 has been made using the MODerate resolution atmospheric TRANsmission (MODTRAN) radiative transfer model. Since after the successful launch on March 25, 2015, the KOMPSAT-3A spacecraft and its two payload instruments - the high-resolution multispectral optical sensor and the scanner infrared imaging system (SIIS) - continue to operate properly. SIIS uses the MWIR spectral band of 3.3-5.2 ㎛ for data acquisition. As input data for the realistic simulation of the KOMPSAT-3A SIIS imaging conditions in the MODTRAN model, we used the National Centers for Environmental Prediction (NCEP) atmospheric profiles, the KOMPSAT-3Asensor response function, the solar and line-of-sight geometry, and the University of Wisconsin emissivity database. The land cover type of the study area includes water,sand, and agricultural (vegetated) land located in the southern California. Results of surface temperature showed the reasonable geographical pattern over water, sand, and agricultural land. It is however worthwhile to note that the surface temperature pattern does not resemble the top-of-atmosphere (TOA) radiance counterpart. This is because MWIR TOA radiances consist of both shortwave (0.2-5 ㎛) and longwave (5-50 ㎛) components and the surface temperature depends solely upon the surface emitted radiance of longwave components. We found in our case that the shortwave surface reflection primarily causes the difference of geographical pattern between surface temperature and TOA radiance. Validation of the surface temperature for this study is practically difficult to perform due to the lack of ground truth data. We therefore made simple comparisons with two datasets over Salton Sea: National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL) field data and Salton Sea data. The current estimate differs with these datasets by 2.2 K and 1.4 K, respectively, though it seems not possible to quantify factors causing such differences.

Preliminary surface soil Derived Concentration Guideline Levels (DCGLs) were derived conforming to the Multi-Agency Radiation Site Survey and Investigation Manual (MARSSIM) procedure for the site release and reuse of Kori Unit 1 in Korea. Based on the decommissioning experiences of the U.S. nuclear power plants, a suite of residual radionuclides was determined, and uncertainties contributed to the resultant dose by the input parameters were quantified via the sensitivity analysis of parameters. The peak of the mean dose was obtained via the probabilistic analysis of the RESRAD (RESidual RADioactivity)-ONSITE code. Consequently, $DCGL_w$ of Kori Unit 1 in accordance with two scenarios, industrial worker and residential farmer scenario, were derived and the results were compared respectively with other NPPs. It could be used as a basic guideline for establishing regulatory standards for reuse planning, designing the site characterization surveys and implementing final status survey (FSS).

Slope rotatability of response surface designs is a desirable property when we are interested in estimating slopes of response surfaces. In this paper, we derive a simplified measure of slope rotatability from new viewpoints for response surface designs that are frequently used in response surface methodology.

An accurate and efficient evaluation for hypersingular integrals (HIs), strongly singular integrals (SSIs), and weakly singular integrals (WSIs) plays an essential role in the numerical solutions of 3D electromagnetic scattering problems. We derive analytic formulas for WSIs based on Stokes' theorem, which can be expressed in elementary functions. Several numerical examples are presented to validate these analytic formulas. Then, to show the feasibility of the proposed formulations for numerical methods, these formulations are used with the existing analytical expressions of HIs and SSIs to correct the near-field interaction in an iterative physical optics (IPO) scheme. Using IPO, the scattering caused by a dihedral reflector is analyzed and compared with the results of the method of moments and measurement data.

For reference human intrusion scenarios constructed in previous study, a probabilistic safety assessment to derive the radionuclide concentration limits for the low- and intermediate- level radioactive waste disposal facility is conducted. Statistical approach by the Latin Hypercube Sampling method is introduced and new assumptions about the disposal facility system are examined and discussed. In our previous study of deterministic approach, the post construction scenarios appeared as most limiting scenario to derive the radionuclide concentration limits. Whereas, in this statistical approach, the post drilling and the post construction scenarios are mutually competing for the scenario selection according to which radionuclides are more important in safety assessment context. Introduction of new assumption shows that the post drilling scenario can play an important role as the limiting scenario instead of the post-construction scenario. When we compare the concentration limits between the previous and this study, concentrations of radionuclides such as Nb-94, Cs-137 and alpha-emitting radionuclides show elevated values than the case of the previous study. Remaining radionuclides such as Sr-90, Tc-99 I-129, Ni-59 and Ni-63 show lower values than the case of the previous study.

하천 제방의 안정성을 평가하기 위해서는 홍수시 제방 주변의 흐름특성을 분석하는 것이 필요하다. 일반적으로 홍수시 유속은 측정된 홍수량을 이용한 단면평균유속을 이용하여 평가를 하고 있기 때문에 제방 주변의 흐름특성을 정확하게 분석하는데 한계가 있다. 이를 개선하기 위해서는 홍수시 제방 주변의 유속을 측정하여야 하는데 접근이 어렵고 위험하기 때문에 봉부자 또는 유속계를 이용한 유속측정이 어려운 실정이다. 이와 같은 경우 제방 주변의 영상 분석을 이용한 표면영상유속계의 활용이 좋은 대안이 될 수 있다. 표면영상유속계의 경우 원거리에서도 줌을 이용하여 영상을 획득할 수 있고, 측정 시간이 짧기 때문에 제방 주변의 유속을 간편하게 측정 가능하다. 하지만 표면영상유속계(SIV)는 영상좌표와 물리좌표 사이의 좌표 변환을 필요로 한다. 종전까지는 일반적으로 8-변수 좌표 변환법이 널리 이용되었으나, 이 방법은 최소한 4점 이상의 참조점이 필요하기 때문에 수면위에 참조점을 설치해야 하는 어려움이 있다. 또한, 내삽을 하는 방법이기 때문에 참조점 내부의 점에 대해서는 비교적 정확한 변환이 가능하지만, 참조점 외부의 좌표들에 대해서는 부정확한 변환이 되는 단점이 있었다. 따라서 본 연구에서는 카메라 모형을 이용하여, 새로운 좌표 변환식을 유도하였다. 이 영상좌표 변환식은 참조점을 이용하지 않으며, 수면과 카메라간의 연직 거리와 카메라의 기울어진 각도만을 이용하여 좌표 변환이 가능한 방법이다. 참조점을 필요로 하지 않기 때문에 측량의 번거로움이 없으며, 변환식내에서 내삽을 하지 않기 때문에 영상 전체에 대해 고른 좌표 변환이 가능한 장점을 지니고 있다.

모멘트법을 적용한 임의 형태 구조의 전자파 수치해석시 Rao에 의해 제시된 삼각형 표면 벡터 전개함수가 많이 사용된다. 이 경우 스칼라 적분식과 벡터 적분식이 나타나는데, 면적 좌표계가 도입되기 때문에 적분과정이 복잡해진다. 또한 구현시는 삼각형의 절점 정보 뿐만 아니라 쌍을 이루는 삼각형 번호의 데이터를 미리 입력하여야 하는 번거로움이 뒤따른다. 이를 극복하고자 본 논문에서는 삼각형 영역 자체에서 적분을 수행함으로써 적분식의 수를 2/3로 줄였으며, 삼각형의 쌍을 이루는 절점 정보로부터 적을 수행할 수 있도록 하였다.