Earticle

현재 위치 Home 검색결과

결과 내 검색

발행연도

년 - 년

학문분야

자료유형

간행물

검색결과

검색조건
검색결과 : 10건
No
1

7,500원

우리나라는 2030 국가 온실가스 감축목표 달성을 위해 관계부처 합동으로 2016년 12월 ‘제1차 기후변화대응 기본계획' 및 ‘2030 국가 온실가스감축 기본로드맵' 등을 수립하여 현재 시행 중에 있다. 이는 2015년에 체결된「파리협정(Paris Agreement)」 등에 따른 것으로 국제사회의 기후변화 대응 노력에 동참하기 위한 조치의 일환이다. 이와 관련, 우리 정부에서는 온실가스 감축 및 화석연료 사용을 최소화하기 위한 탄 소중립형 친환경 에너지 선박 개발의 필요성을 인식하고 이를 수용하기 위한 검사기 준 마련 등과 같은 조치를 지속적으로 추진하고 있다. 한편, 이러한 신기술이 접목된 선박을 새롭게 개발하기 위해서는 건조에 따른 검 사기준을 관련 법령에 따라 구체적으로 제시하여야 하며, 현행 「선박안전법」 제26조에 따른 「전기추진 선박기준」, 「어선법」 제3조에 따른 「축전지 추진 어선의 설비기준」 및 「수상레저기구의 등록 및 검사에 관한 법률 시행규칙」 제13조제4항에 따른 「전기 추진 동력수상레저기구 설비기준」 등이 이에 해당한다. 그러나 이와 같은 검사기준은 ⅰ) 순수 전기추진 방식으로 기존 내연기관(디젤기 관, 가솔린기관 등)을 배제하고 오로지 전기와 관련된 설비에 의해서만 추진되는 선 박과 ⅱ) 직렬식 하이브리드 방식으로 내연기관과 전기추진 설비를 각각 설치하여 서로 간 상호 간섭 없이 필요에 따라 둘 중 하나의 방식으로만 구분해서 추진되는 선박에 한해 제한적으로 적용되고 있어 이와는 다른 전기복합 추진 시스템(병렬식 하이브리드 등)을 적용하는 선박을 개발하고자 할 경우 별도의 추가 검사기준 마련 이 필요하다. 가령, 실용화를 목적으로 새로운 신기술 선박을 개발하고자 할 경우 통상 이를 수용할 수 있는 검사기준 개발을 포함하게 된다. 이에 따라 본 논문에서는 전기추진 설비 등을 사용하여 선박을 건조하는 현행 검 사기준 이외 다른 방식의 전기복합(병렬식 하이브리드) 추진 선박을 건조하는데 있 어 필요로 하는 제도적 요소들에 대해 살펴보고, 이를 통해 보다 다양한 친환경선박 으로의 전환 확대를 위한 토대를 마련하는 것은 물론이고 국내·외 해양환경 규제 정 책에 안정적으로 대응하기 위한 기초자료를 제시하고자 한다.

In order to achieve the 2030 national greenhouse gas reduction goal, our country established the '1st Framework Plan for Response to Climate Change' and the '2030 National Greenhouse Gas Reduction Basic Road Map' in December 2016 in cooperation with relevant ministries, and is currently implementing them. This is in accordance with the ‘Paris Agreement’ concluded in 2015, and is part of measures to participate in the international community’s efforts to respond to climate change. In this regard, the our government recognizes the need to develop carbon neutrality environment friendly energy vessels to reduce greenhouse gases and minimize the use of fossil fuels, and continues to take measures such as preparing survey regulations to accommodate them. Meanwhile, in order to newly develop vessels incorporating these new technologies, survey regulations according to shipbuilding must be presented specifically in accordance with relevant laws and regulations. These include the “Electric Propulsion Vessel Standards” under Article 26 of the “Ship Safety Act,” the “Equipment Standards for Battery Propulsion Fishing Vessels” under Article 3 of the “Fishing Vessels Act,” and the “Equipment Standards for Electric Propulsion Power-Driven Water Leisure Craft” under Article 13(4) of the “Enforcement Rules of the Act on Registration and Inspection of Water Leisure Craft”. However, such survey regulations are only applied to i) vessels that are propelled solely by electricity-related equipment, excluding existing internal combustion engines(diesel engines, gasoline engines, etc.) with a battery electric propulsion method, and ii) vessels that are propelled by only one method as needed without interference between the two, with a series hybrid method, in which internal combustion engines and electric propulsion equipment are installed separately. Therefore, if a ship that applies a different electric composite propulsion system(such as a parallel hybrid) is to be developed, separate additional survey regulations need to be established. For example, if a new technology ship is to be developed for the purpose of practical use, it usually includes the development of survey regulations that can accommodate it. Accordingly, this study examines the institutional elements required to shipbuilding electric composite (parallel hybrid) propulsion vessels other than the survey regulations for shipbuilding using current electric propulsion facilities, etc., and through this, it aims to lay the foundation for expanding the transition to more diverse environment friendly ships and to provide basic data for stably responding to domestic and foreign marine environmental regulation policies.

2

Research on Search-Based Scheduling and Allocating Algorithm SCOPUS

Fan Zhang, Yueli Li, Chen Chen

보안공학연구지원센터(IJGDC) International Journal of Grid and Distributed Computing Vol.9 No.1 2016.01 pp.167-180

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

Trans-regional operation with Chinese characteristics, which is a unique farm machinery social service, appeared in our country. How to select scheduling paths and farmland for obtaining the maximum profits is difficult to make decision. The scheduling and allocating income model with the goal of high-income and low-cost is established in the paper. Then the concept of parallel tasks is defined, judgment of parallel tasks, generation of scheduling path graph with heuristic information and establishment of combined scheduling and allocating rules are studied in the paper. Multi-machinery simultaneous scheduling and allocating algorithm and scheduling and allocating in demand algorithm are proposed according to the characteristic of multi-machinery and multi-point operation. Scheduling and allocating strategies of parallel tasks are improved and search-based scheduling and allocating algorithm are put forward. The feasibility and validity of search-based scheduling and allocating algorithm are further verified at the aspects of parallel task, amount of farmland and farm machinery demand.

3

Energy Aware Scheduling based on Two-phase Frequency Scaling for Parallel Tasks in Cluster

Aihua Liang, Jun Liang, Jiazheng Yuan

보안공학연구지원센터(IJGDC) International Journal of Grid and Distributed Computing Vol.8 No.5 2015.10 pp.205-214

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

Improving the energy efficiency of high performance clusters has become important research issue. We proposed a new algorithm that reduces energy consumption of precedence constrained parallel tasks in power-scalable clusters. To reduce energy consumption without increasing the schedule length, our algorithm reclaims both static and dynamic slack time and employs different frequency adjusting techniques in different slack time. The optimal frequency is obtained through analyzing the precedence constraints of parallel tasks. We conducted extensive experiments to compare the proposed algorithm with two other existing algorithms, simulation results show that the proposed algorithm can get better energy efficiency without increasing the make span.

4

Fault-tolerant Scheduling of Real-time Parallel Tasks with Energy Efficiency on Multicore Processors

이관우

[Kisti 연계] 한국정보처리학회 정보처리학회논문지/컴퓨터 및 통신 시스템 Vol.3 No.6 2014 pp.173-178

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

제시된 스케줄링 기법은 병렬처리 기법을 활용하여 실시간 작업들의 데드라인 제약과 결함 포용 제약을 만족하면서 멀티코어 프로세서의 에너지 소모 효율성을 향상시켰다. 최소 에너지 소모량 스케줄을 찾는 것은 NP-hard 문제이므로, 제시된 기법은 다항식의 시간 내에 최소 에너지 소모량에 근접하는 스케줄을 찾는다. 제시된 기법은 연관된 최신 기법과 비교하여 높은 병렬처리 속도는 물론 낮은 병렬처리 속도에서도 에너지 소모량이 현격하게 낮았으며, 에너지 소모량을 최대 86% 줄였다.

By exploiting parallel processing, the proposed scheduling scheme enhances energy saving capability of multicore processors for real-time tasks while satisfying deadline and fault tolerance constraints. The scheme searches for a near minimum-energy schedule within a polynomial time, because finding the minimum-energy schedule on multicore processors is a NP-hard problem. The scheme consumes manifestly less energy than the state-of-the-arts method even with low parallel processing speedup as well as with high parallel processing speedup, and saves the energy consumption up to 86%.

5

Fault-tolerant Scheduling of Real-time Parallel Tasks with Energy Efficiency on Multicore Processors

이관우

[NRF 연계] 한국정보처리학회 KIPS Transactions on Computer and Communication Systems Vol.3 No.6 2014.06 pp.173-178

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

By exploiting parallel processing, the proposed scheduling scheme enhances energy saving capability of multicore processors forreal-time tasks while satisfying deadline and fault tolerance constraints. The scheme searches for a near minimum-energy schedule withina polynomial time, because finding the minimum-energy schedule on multicore processors is a NP-hard problem. The scheme consumesmanifestly less energy than the state-of-the-arts method even with low parallel processing speedup as well as with high parallelprocessing speedup, and saves the energy consumption up to 86%.

6

주파수 공유형 멀티코어 프로세서를 위한 부하균등화에 기반한 실시간 병렬 작업들의 최소 전력 스케줄링

이완연

[Kisti 연계] 한국정보처리학회 정보처리학회논문지/컴퓨터 및 통신 시스템 Vol.4 No.6 2015 pp.177-184

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

본 논문에서는 DVFS 기반의 멀티코어 프로세서상에서 실시간 병렬 작업들의 마감시한을 만족하면서 전력 소모량을 최소화시키는 스케줄링 기법을 제안하였다. 제안된 기법에서는 먼저 모든 프로세싱 코어들의 계산부하가 동일해지도록 각 작업에게 할당될 프로세싱 코어들의 실수 개수를 찾는다. 그리고 프로세싱 코어들의 계산부하가 동일하도록 유지하면서 찾은 실수 개수의 프로세싱 코어들을 자연수 개수의 프로세싱 코어들로 변환시켜 각 작업들의 실행에 할당한다. 제안된 방법은 단일 시점에 동일한 속도로 동작하는 주파수 공유형 멀티코어 프로세서의 전력 소모량을 최소화하도록 설계되었다. 성능 평가 실험에서 제안된 기법이 기존 방법의 전력 소모량을 최대 38%까지 감소시킴을 확인하였다.

This paper proposes a minimum-power scheduling scheme of real-time parallel tasks while meeting deadlines of the real-time tasks on DVFS-enabled multicore processors. The proposed scheme first finds a floating number of processing cores to each task so that the computation load of all processing cores would be equalized. Next the scheme translates the found floating number of cores into a natural number of cores while maintaining the computation load of all cores unchanged, and allocates the translated natural number of cores to the execution of each task. The scheme is designed to minimize the power consumption of the frequency-sharing multicore processor operating with the same processing speed at an instant time. Evaluation shows that the scheme saves up to 38% power consumption of the previous method.

7

다중 작업 처리를 위한 BDI 에이전트 시스템

곽별샘, 이재호

[Kisti 연계] 한국정보과학회 한국정보과학회 학술대회논문집 2006 pp.235-237

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

소프트웨어는 네트워크로 연결된 다수의 시스템으로 분산되어 주어진 문제를 해결하기 위해 서로 협업하는 방향으로 발전하고 있다. 이러한 시스템의 적절한 예로 멀티 에이전트 시스템을 들 수 있다. 에이전트를 통해 시스템은 느슨하게 결합되어 에이전트의 교체, 추가 및 확장 등이 용이하다. 본 논문에서는 BDI 아키텍처에 기반한 지능형 에이전트 시스템인 VivACE 에이전트 시스템을 제시하고 JADE 플랫폼을 이용해 멀티 에이전트 시스템으로 확장하는 예를 제시한다.

8

주파수 공유형 멀티코어 프로세서를 위한 부하균등화에 기반한 실시간 병렬 작업들의 최소 전력 스케줄링

이완연

[NRF 연계] 한국정보처리학회 KIPS Transactions on Computer and Communication Systems Vol.4 No.6 2015.06 pp.177-184

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

본 논문에서는 DVFS 기반의 멀티코어 프로세서상에서 실시간 병렬 작업들의 마감시한을 만족하면서 전력 소모량을 최소화시키는 스케줄링기법을 제안하였다. 제안된 기법에서는 먼저 모든 프로세싱 코어들의 계산부하가 동일해지도록 각 작업에게 할당될 프로세싱 코어들의 실수 개수를 찾는다. 그리고 프로세싱 코어들의 계산부하가 동일하도록 유지하면서 찾은 실수 개수의 프로세싱 코어들을 자연수 개수의 프로세싱 코어들로 변환시켜 각 작업들의 실행에 할당한다. 제안된 방법은 단일 시점에 동일한 속도로 동작하는 주파수 공유형 멀티코어 프로세서의 전력 소모량을 최소화하도록 설계되었다. 성능 평가 실험에서 제안된 기법이 기존 방법의 전력 소모량을 최대 38%까지 감소시킴을 확인하였다.

This paper proposes a minimum-power scheduling scheme of real-time parallel tasks while meeting deadlines of the real-time tasks on DVFS-enabled multicore processors. The proposed scheme first finds a floating number of processing cores to each task so that the computation load of all processing cores would be equalized. Next the scheme translates the found floating number of cores into a natural number of cores while maintaining the computation load of all cores unchanged, and allocates the translated natural number of cores to the execution of each task. The scheme is designed to minimize the power consumption of the frequency-sharing multicore processor operating with the same processing speed at an instant time. Evaluation shows that the scheme saves up to 38% power consumption of the previous method.

9

데이터 스트림 연속 처리 태스크의 병렬 처리 방법

양경아, 이대우, 김기헌

[Kisti 연계] 한국정보처리학회 한국정보처리학회 학술대회논문집 2015 pp.214-215

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

데이터 스트림 환경에서 연속 질의를 처리하기 위한 데이터 스트림 처리 시스템이 개발되었다. 데이터 스트림 처리 시스템에서 질의를 처리하는 태스크에 과도한 데이터가 발생할 경우 일반적으로 데이터 스트림을 선별적으로 버리는 load shedding 방법을 이용하지만 이러한 방법은 처리 결과의 정확도가 저하될 수 있다. 따라서, 본 논문은 이를 해결하는 방법으로 분산 데이터 스트림 처리 시스템에서 데이터 스트림 분할을 통한 데이터 스트림 연속 처리 태스크의 병렬 처리 방법을 제시한다. 이를 위해 분산 데이터 스트림을 처리하기 위한 기준을 제시 및 데이터 분할 방법에 대해서 언급한다.

10

주기적 실시간 작업들의 전력 소모 감소를 위한 병렬 수행을 활용한 다중코어 DVFS 스케줄링 기법

박수희

[Kisti 연계] 한국컴퓨터정보학회 Journal of the Korea society of computer and information Vol.19 No.12 2014 pp.1-10

※ 협약을 통해 무료로 제공되는 자료로, 원문이용 방식은 연계기관의 정책을 따르고 있습니다.

원문보기

본 논문에서는 다중코어 프로세서 상에서 주기적 실시간 작업들의 데드라인을 만족하면서 전력 소모량을 최소화하도록 DVFS 기법과 전원 소등 기법을 모두 사용하는 스케줄링 방법을 제안하였다. 제안된 스케줄링 방법은 프로세싱 코어들이 단일 시점에 같은 속도로 동작하는 연관형 프로세서 모델에 적합하도록 설계되었고, 기존 연구에서 해결하지 못한 프로세싱 코어들의 부하불균등 현상을 병렬 수행을 작업들에 적용하여 해소함으로써 전력 소모량을 줄였다. 또한 작업들의 전체 계산량을 고려하여 일부 프로세싱 코어들만을 활성화하여 사용하고 나머지 코어들의 전원은 소등하여 전력 소모량을 줄였다. 전체 프로세싱 코어들 중에서 활성화될 프로세싱 코어들의 개수는 수학적 분석을 통하여 결정되었다. 성능 평가 실험에서 제안된 방법은 기존 방법보다 전력 소모량을 최대 77%까지 감소시킴을 보였다.

This paper proposes a scheduling scheme that enhances power consumption efficiency of periodic real-time tasks using DVFS and power-shut-down mechanisms while meeting their deadlines on multicore processors. The proposed scheme is suitable for dependent multicore processors in which processing cores have an identical speed at an instant, and resolves the load unbalance of processing cores by exploiting parallel processing because the load unbalance causes inefficient power consumption in previous methods. Also the scheme activates a part of processing cores and turns off the power of unused cores. The number of activated processing cores is determined through mathematical analysis. Evaluation experiments show that the proposed scheme saves up to 77% power consumption of the previous method.

 
페이지 저장