Earticle

스캐닝된 지상사진의 수치화상데이타를 이용하여 정사투영화상을 작성하는 기법을 제시하였다. 수치화상데이타를 얻기 위하여 촬영된 지상사진을 CCD 카메라 스캐너로 스캐닝한 후, 4차 다항식을 적용하여 스캐닝과정에서 생긴 기하왜곡을 보정하였다. 좌우 화상에 있어서 각 화소의 동일점을 찾기 위하여 자동매칭기법을 적용하였으며 외부표정요소를 이용한 공간교차이론으로 각 화소의 3차원 지상좌표를 구하였다. 얻어진 3차원 지상좌표와 우측화상데이타값으로부터, 거리의 역에 따른 가중평균법을 사용하여 1개 화소의 크기가 $1mm{\times}1mm$ 되는 정사투영화상을 작성하였다. 검사점에 대하여, 작성된 정사투영화상상의 X 및 Y좌표와 지상관측된 좌표를 비교하여 정사투영화상 작성기법의 유효성을 검증할 수 있었다.

Investigation is given to the detailed procedure of a computer assisted automatic technique for ortho-image generation from digital stereo image data of close-range photographs scanned by the CCD camera scanner. After rectification of geometric scanning errors, the bundle adjustment technique was used to determine the exterior orientation parameters of terrestrial camera. An automatic correlation matching technique was applied to search for the conjugate pixels in digital stereo pairs. And the 3-dimensional coordinates of the corresponding pixels were calculated by the space intersection method. For the generation of ortho-image from the calculated coordinates and right image data values, inverse-weighted-distance average method was used. And the accuracy of the resulting ortho-image was checked by comparing its image coordinates with there corresponding ground coordinates for the check points.

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and asymmetrical in experimental images. Hence, it is difficult to measure fringe order accurately at a data point by visual observation. In this study, a method of fringe sharpening, which can extract shapened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photelastic fringe patterns are simulated and their images are processed to yield sharpened lines. The method is then applied to general problems such as images of a circular disk compressed by diametrically concentrated loads and a circular cylinder sybject to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

Cellulase activities assay for the enzyme produced from a filamentous fungus Trichoderma reesei strain QM9414 and Rut C-30 were performed. Reducing sugar released from cellulase hydrolysis was detected by dinitrosalicylic acid (DNS) method. The color developed from DNS was then measured by Digital Image Processing (DIP) technique in normal scale comparing the conventional spectrophotometric assay to the new DIP technique. Both spectrophotometric assay and DIP technique showed similar average cellulase activities with no statistically difference (P>0.05) among the 2 methods in normal scale. The cellulase activities of T. reesei QM9414 and Rut C-30 were measured, using mini-scale (5 times reduced) of DNS method comparing spectrophotometric assay to the DIP technique. The mini-scale of spectrophotometric assay and the DIP technique also displayed no difference of cellulase activities at confidence interval 95%. This study showed that the cellulase activity determination in the mini-scale by the DIP technique could rapidly be used for the determination with convenience and accuracy.

비측정용 사진기로 촬영된 사진으로부터 수치화상처리기법과 컴퓨터를 이용하여 3차원 좌표 및 정보를 추출하는데 있어서는 해결해야 할 과제들이 뒤따르게 된다. 따라서 본 연구에서는 수치사진화상을 얻기위한 비측정용 사진의 스캐닝 방법, 스캐닝 시에 발생하는 기하왜곡의 보정방법, 각 화소에 해당하는 3차원 지상좌표 추출을 위한 공간교차이론의 효율적 적용기법 등을 연구하고 실제 적용을 통하여 제시된 기법의 유효성을 검증할 수 있었다.

Significant developments in the use of digital imagery for close-range photogrammetric metrology have occured in the last few years because of technological advances in digital image processing. Present day needs for applications of digital image processing technique to measurements of photographs obtained with non-metric camera at reduced cost, automation and convenience. In order for this application to be useful, a detailed procedure must be developed. Investigation of this study is given to the detailed procedure for the digital measurements of the object space data from the scanned non-metric photographs.

홀로그래피 간섭무늬로부터 변형의 요철방향을 구하기 위하여 무늬반송법을 응용하였다. 변형에 의해 형성된 간섭무늬의 차수가 기준무늬를 따라 한 방향으로 증가하도록 하였으며, 디자탈 영상처리 기술을 이용하여 간섭무늬 해석을 자동화 하였다.

The purpose of this paper is to build a computer vision system that endows an autonomous mobile robot the ability of automatic measuring of the analog and digital meters installed in nuclear power plant(NPP). This computer vision system takes a significant part in the organization of automatic surveillance and measurement system having the instruments and gadzets in NPP under automatic control situation. In the meter image captured by the camera, the meter area is sorted out using mainly the thresholding and the region labeling and the meter value recognition process follows. The positions and the angles of the needles in analog meter images are detected using the projection based method. In the case of digital meters, digits and points are extracted and finally recognized through the neural network classifier. To use available database containing relevant information about meters and to build fully automatic meter recognition system, the segmentation and recognition of the function-name in the meter printed around the meter area should be achieved for enhancing identification reliability. For thus, the function- name of the meter needs to be identified and furthermore the scale distributions and values are also required to be analyzed for building the more sophisticated system and making the meter recognition fully automatic.