Earticle

본 논문에서는 IEEE123 모선 배전계통에 분산전원 투입이 가능하도록 GUI 조류계산프로그램 개발하였다. 첫째로 제안된 배전용 조류계산 프로그램은 기존의 배전용 조류계산의 한계를 벗어나 분산전원을 투입을 가능하게 하고 비주얼하게 온라인으로 배전계통의 구조를 컴퓨터 마우스 클릭으로 손쉽게 할 수 있도록 구성하였다. 둘째로 GUI부분에서 모선, 선로, 차단기의 정보를 표시할 수도 있고 사용자가 분산전원의 투입이나 차단 그리고 선로 및 부하의 투입 및 차단이 가능하도록 하였다. 개발된 프로그램은 데이터 변환기, 조류계산프로그램 및 GUI로 구성되어 있으며 이 3부분은 메시지 Queue 명령에 의하여 서로 메모리를 공유하도록 되어있다. 분산전원 투입 및 차단은 4군데로 지정하여 분산전원 투입량의 효과를 시각적으로 표시하는 데 편하도록 되어 있다. 조류계산의 결과는 GUI상에 유효전력, 무효전력, 모선전압, 역률을 각 모선의 근접 위치에 나타낸다.

<P>Demand-side management (DSM) is easy to apply to reduce system peak load by a utility and it can be a convenient way to control and change amount of electric usage by end-use customers. Planning and operating techniques for a DSM program are required to efficiently manage and operate the program. This paper is focused on planning technique for an incentive-based DSM program. This paper describes a stochastic model that can estimate the operating days, hours, and total capacity for efficiently planning a DSM program. A temperature stochastic process, from weather derivatives, is used in the proposed method. Temperature sensitivity is proposed to improve load forecasting accuracy. The generalized extreme value distribution is also proposed for estimating stochastic results. The results of case studies are presented to show the effectiveness of the proposed method.</P>

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

The automated demand response (DR) program encourages consumers to participate in grid operation by reducing power consumption or deferring electricity usage at peak time automatically. However, successful deployment of the automated DR program sphere needs careful assessment of appliances load profile (ALP). To this end, the recent method estimates frequency, consistency, and peak time consumption parameters of the daily ALP to compute their potential score to be involved in the DR event. Nonetheless, as the daily ALP is subject to varying with respect to the DR time ALP, the existing method could lead to an inappropriate estimation; in such a case, inappropriate appliances would be selected at the automated DR operation that effected a consumer comfort level. To address this challenge, we propose a more proper method, in which all the three parameters are calculated using ALP that overlaps with DR time, not the total daily profile. Furthermore, evaluation of our method using two public residential electricity consumption data sets, i.e., REDD and REFIT, shows that our energy management systems (EMS) could properly match a DR target. A more optimal selection of appliances for the DR event achieves a power consumption decreasing target with minimum comfort level reduction. We believe that our approach could prevent the loss of both utility and consumers. It helps the successful automated DR deployment by maintaining the consumers' willingness to participate in the program.

This paper presents development of program for mid-tong term load forecasting in region and district respectively. In this program, at first, the region is classified by KEPCO branch which can be analyzed in light of curl·elation between load characteristics and economic indicator and then, prediction for load density in each region was performed by scenario of economic, population and city plan. Secondly, prediction for load density in each district is performed by methodology which is based on land use method. Finally efficiency for prediction work in each KEPCO branch could be identified by applying the developed program to the Seoul city in real.

Objects adrift can cause considerable damage to coastal infrastructure and property during tsunami and storm surge events. Despite the potential for harm, the drifting behavior of these objects remains poorly understood, thereby hindering effective prediction and mitigation of collision damage. To address this gap, this study employed a motion analysis program to track a drifting container's location using images from an existing laboratory experiment. The container's trajectory and velocity were calculated based on the positions of five markers strategically placed at its four corners and center. Our findings indicate that the container's maximum drift velocity and distance are directly influenced by the scale of the solitary wave and inversely related to the container's weight. Specifically, heavier containers are less likely to be displaced by solitary waves, while larger waves can damage coastal structures more. This study offers new insights into container drift behavior induced by solitary waves, with implications for enhancing coastal infrastructure design and devising mitigation strategies to minimize the risk of collision damage.

수질오염총량관리제 시행 하천에 대해서는 객관적이고 과학적 방법으로 유역내 각 지역의 오염부하량을 할당할 필요가 있다. 본 연구에서는 대도시에서 배출되는 오염부하의 영향을 크게 받는 영산강수계의 중상류부를 대상으로 오염부하량 할당 방법에 대해 검토하였다. 오염부하량 할당을 위한 수질모델링은, 수질관리에 흔히 적용되어온 QUAL2E의 최근 판인, QUAL2Kw를 이용해서 수행하였다. 모델 적용 대상 지역의 각 reach의 수질매개변수는 QUAL2Kw의 자동보정 기능을 이용해서 추정하였다. 오염부하량 할당의 최적화는 유전알고리즘(genetic algorithm)을 이용하였고, 최소부하량 삭감법(least waste load removal allocation), 일정 부하량 이상 최소부하량 삭감법(least waste load removal over a certain value), 동일삭감률 할당법(equal removal rate)의 세가지 방법을 적용하고 비교 검토하였다. 동일삭감률 할당법은 다른 방법보다 유역 전체 부하량 삭감량이 훨씬 크기 때문에 효과적이지 않았고, 이 방법을 쓰기 위해서는 부하량 삭감대상인 각 소유역과 하수처리장을 그 규모와 특성에 따라 세분화할 필요가 있다. 동일삭감률 할당법의 적용시 세가지 범주로 나누어서 삭감률을 적용하였다. 오염부하량 삭감의 효율성을 감안할 때 최소 부하량 삭감법보다 일정 부하량 이상 최소부하량 삭감법이 더 적절한 것으로 검토되었다.

Nutrient loads in inland rivers can propagate downstream to estuaries and near-coastal waters, where water-quality conditions may affect fisheries and aquaculture. This study examines the effect of a nutrient load control program on total phosphorus in South Korea. Using a difference-in-differences approach with fixed effect models, the study constructs monitoring stations in the Nakdong, Geum, and Yeongsan rivers as the treatment group and monitoring stations in the Han River as the control group. The study leverages total phosphorus (TP) control as the policy intervention. Using monitor-by-time data from the national Total Maximum Daily Load network from 2007 to 2012, the study found that TP levels decreased by approximately 3.6% after the policy intervention. The study further examines flexible and honest DIDs and finds limited but suggestive evidence of this improvement. The findings provide suggestive evidence of load-based regulation in reducing TP and provide policy-relevant evidence on upstream nutrient control that may inform broader downstream water-quality management in connected river-estuary systems.

This Article aims to analyze American water quality regulation under the Clean Water Act, devoting most of the discussion to the Act’s Total Maximum Daily Load (TMDL) program and U.S. Environmental Protection Agency’s latest attempt to revise and revitalize the program. Based on that analysis, the Article goes on to attempt to glean several lessons that can be applied to recent Korean efforts to introduce the TMDL program. The TMDL program represents a new regulatory approach under which total allowable pollution levels on a waterbody are established and enforced. It can be a viable alternative to the traditional approach that focuses on effluent limitations enforced against point sources under the permitting system. The TMDL program is built on the watershed approach and has the potential to solve the nation’s remaining water quality programs, especially, nonpoint source pollution, on a holistic and consensual basis. Its success will make it possible to implement innovative solutions to water pollution control, such as effluent trading and multimedia permitting. There are several barriers to the effective functioning of the TMDL program. Among others, the central government must reserve the authority to directly impose mandatory measures on nonpoint sources if municipalities fail to provide for effective controls on them. And it is necessary to resolve many of the scientific uncertainties and technological difficulties, which will occur in the process of setting total allowable pollution levels and allocating them among various sources. Most importantly, the nation should create a broad consensus on the urgent need to harmonize environmental protection and economic development that the TMDL program tries to achieve.

In KwangYang steel works power system operation, the ON-LINE application of power system diagnosis technology is indispensable to not only power quality, but also stable operation and economical generation. In cases of stability constraint violation. stable power system operation is obstructed. Steel works power system is consist of 154kV transmission lines, and 345, 154, 22, and 6.6[KV] distributed lines, 5 numbers of substation, 17 units of generators. For this power system operation. loadflow program is developed. Database is tied with Windows GUI application, is designed, and is interfaced with this program. This program put up with loadflow solution of assembled MMI power system, and planed to diagnose of overloads or to imitate entrance, and isolation of equipment.

This paper proposes the Embedded Linux System that can overcome the shortcomings of conventional CNC machine system. Linux is free of charge with the open source library and tools that can be used in the development of Kernel. Besides, Application is easily available through countless open source, allowing simple mending for seamless porting. This study have developed the study about NC Program automation Load System based on Embedded Linux and the ordered controller.

This paper proposes an efficient method of On-Line Economic Load Dispatch(ELD) using Evolutionary Programming(EP) technique at Kwangyang steel works. The economic operation of steel works is done by experienced engineer. So far, there is no formulation and algorithm of economic operation of steel works. In this paper, we propose the formulation and On-Line algorithm of economic operation of steel works. The EP technique is the kind of Evolutionary Computation(EC) which has become a candidate for many optimization applications due to its flexibility and efficiency. Based on the EP technique, the proposed algorithm is capable of not only solving the economic problem, but also obtaining the global optimal solutions within reasonable execution time. To validate our proposed approach, the algorithm is demonstrated on many sample systems and compared to actual values of steel works.

The accelerated testing technique using the equivalent load condition plays an important part in development process. However, in the industrial field, the theoretical background and advantages of this accelerated testing technique have been lack of understanding. Because the environmental durability condition forms the foundation of the accelerated testing technique, it is important to analyze the loading components and damage in service environment. In this work, we present the theoretical background and process for accelerated testing, and introduce our accelerated equivalent load analysis program. We developed the GUI program, and the user can easily obtain the result by selecting the program module.

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

정부의 배전분할 유보결정에 따라 전력거래소에서는 현행 발전경쟁시장의 효율성 향상을 위한 많은 사업을 추진하고 있다. 그중 우선적으로 추진하였던 사업이 도매전력시장을 대비해 구축한 시장운영시스템(MOS; Market Operation System)을 현행 계통운영을 담당하고 있는 급전 자동화시스템(EMS; Energy Management System)과의 연계활동이다. 이는 시장운영시스템(MOS)에 내재되어 있는 최첨단 기능중에서 일부를 현행 전력시장에 적용함으로써 계통운영의 효율성 향상뿐만 아니라 계통운영기술을 선진화하는 것이다. 특히, 기존 급전시스템에 비해 가장 두드러지는 점은 발전기들에 대한 에너지 및 예비력 급전계획을 사전적으로 5분단위로 최적화하여 수립하고 이를 발전기들에게 송신함으로써 경제적이며 안정적인 전력계통운영을 가능하게 해 줄 수 있는 것이다. 이를 가능하게 하기 위해서는 바로 정확한 미래 수요수준의 결정이 필수불가결한 요소이다. 따라서 본 논문에서는 MOS-EMS 연계활용에서의 실시간 수요예측의 중요성과 기존 제작사의 알고리즘과 국내 전력수요특성간의 불일치점 그리고 이를 해결하고자 모색했던 방안들에 대하여 설명하고자 한다.

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

This paper describes a research for activation of diect load control program in competitive electicity market. A direct load control program after the restructuring of electric power industry will evolve to the bilateral information system to derive a voluntary participation of demand side resource. Therefore, this paper presented a right way of direct load control program for the foreign market research.

This paper deals with an allocation strategy for the resources of direct load control program, which is considered the operating states in power systems. The existing approaches, load shedding priority algorithm, curtailment payback based algorithm and mixed curtailment algorithm, are based on the uniform allocation strategy. These approaches are not taken into account the operating states in power systems. So, under the critical operating condition, direct load control resource is evaluated by introducing the congestion factor.