Earticle

This paper presents a preliminary study on the development of a Light-Emitting Diode (LED) fishing lamp system that can maintain a stationary irradiation region despite ship rolling motions. The proposed system is composed of three modules which include a main control module, a fishing lamp module, and a sensor module. The main control module collects both the operating condition setting of the fishing lamp via the input panel and the tilt angle information of a fishing boat from the sensor module. It provides the conditions and information to the fishing lamp module for controlling the LED modules that maintain a stationary irradiation region. One fishing lamp module is composed of 22 LED modules, a lamp controller, and a temperature sensor. The sensor module is used for measuring the tilt angle of the fishing boat. Tests were carried out to verify the reliability of the LED module driver and the sensor module. The tests showed that the LED modules were reliably controlled, in accordance with the rolling motion of a fishing boat.

본 논문에서는 LED 형광등에 활용이 가능한 컨버터 관한 연구를 수행하였다. 기존 고효율에너지 기자재로 지정된 형광램프용 고조 도 반사갓이 LED 형광램프의 Heat-sink 구조상 활용할 수 없는 구조이기 때문에 LED 형광램프 컨버터의 에너지 효율이 뛰어난 회로 설계 및 보호회로 설계가 필요하다. 따라서 본 논문에서는 직관형 LED램프 컨버터에 회로구동방식을 적용한 LED 형광등 연구 를 수행하였다. 또한, LED를 광원으로 한 ‘LED 램프’와 일반 상용 전원에 접속해 직류 전원을 공급할 수 있는 컨버터에 대하여 설계 및 제작을 하였다.

In this paper, we perform a study on LED Fluorescent Lamp applying Circuit Driven Method to Tubular LED Lamp Converter. The energy efficiency of LED fluorescent lamp converter requires exceptional protection circuit design, circuit design and structure, because it can not take advantage of Heat-sink structure of the heightened degree Reflector for Fluorescent Lamp. In this paper, we performed a study on LED fluorescent lamp applying circuit driven method to tubular LED lamp converter, Also, we designs LED lamp and converter which can supply DC power common commercial power source.

In this study, We have taken LED lamps which are widely used recently, applied it to training ship's cabin and lounge, cafeteria, engine control room and analyzed the power consumption and illumination with existing fluorescent. Replacing 40W, 20W of fluorescents with 22W, 11W of same number of LED lamps, It showed 45% of power consumption savings and resulted to more than 20% of illumination improvement. If applied to all areas of the ship, It would surely contribute to great amount of energy savings and illumination improvement.

LED industry in the world, is rapidly emerging as an important policy means of each countries for climate change, saving energy and international environmental regulations. And incandescent bulb regulatory policy in each country is the role of growth catalysts for the LED lamp industry, it is expected to increase research and investment for the LED package in the future. However, In spite of the growth of the LED lamp industry, the price of the world LED lamp has been declining more than 30% per year and it is accelerating further. Therefore, an alternative techniques for high performance and cost reduction of the LED lamp has been studied. In this study, we studied the aluminum extrusion product inserted heat sink as a one of the alternative techniques which can improve the thermal efficiency and reducing costs. As a result, radiant heat effect was improved around 44.5% higher than the thermally conductive resin heat sink.

First introduced in 1962, LED(light-emitting diodes) emitted low-intensity red light, but modern versions are now available across the ultraviolet, visible, and infrared spectrum, many with very high luminance or brightness. As a result, growing importance of potential safety harzards for human. Now when certificated of CE provide that testing through IEC/EN 62471 for any lamp. Korea standard adopted as it IEC 62471:2006, Photobiological safety of lamps and lamp systems without change, but effectiveness is incomplete. In this paper, we introduce analysis and direction that urgently come into effectiveness of KS C IEC 62471 as a national standard specifications.

This paper develops a LED fishing lamp mounting system which slides in and out a LED fishing lamp mounting rack according to fishing situation of a fishing boat. Sliding mechanism of the LED fishing lamp mounting system is realized with a rack and pinion. Components of the LED fishing lamp mounting system are modeled with finite elements. In addition, the LED fishing lamp mounting system is modeled with rigid bodies. A rigid body model of the LED fishing lamp mounting system is interfaced with finite element component models to develop a computational model of the LED fishing lamp mounting system. A simulation is performed with the developed computational model for dynamic stress analysis of the LED fishing lamp mounting system. A bouncing, rolling, and pitching motion which describe a very rough sea are used as input conditions for the simulation. Six cases are considered for the simulation based on the number of fishing lamp and the location of sliding rack.

최근, 자동차 전조등에 할로겐 램프가 아닌 LED 전조등을 사용하고 있는 추세이다. 이 LED 전조등 내부 에는 방열판이 존재한다. 방열판은 LED 수명에 지대한 역할을 하는 중요한 부품이다. 방열판은 매개물로부터 나온 열을 흡수하여 다이오드의 오버히트를 방지하는 장치이다. 본 연구에서는 LED 전조등 방열판의 형상에 따른 열전 달과 열응력에 대하여 알아보았다. 본 연구 결과로서, Model 1이 Model 2에 비해 열이 더 많이 내려가고 내구성면 에서도 좋은 값이 나와 내구성이 더 있었다. 이러한 기반데이터로 방열판 형상에 융합기술 적용하여 자동차 전조등 에 그 미적 감각을 나타낼 수 있다.

The Nowadays, LED head lamp has been used instead of halogen lamp at automotive head lamp. Inside this LED head lamp, there is a radiant heat panel which has the role to have the considerable influence upon LED life. As the radiant heat panel absorbs the heat from medium, the overheat of diode can prevented. in this study, the heat transfer and thermal stress are investigated according to the configuration of radiant heat panel. As the result of this study, the heat at model 1 decreases in comparison with model 2 and model 1 in design has the durability more than model 2. As the convergence technique is grafted on the design of radiant heat panel, the esthetic sense can be shown at the automotive head lamp.

This paper was used as a classroom ceiling, fluorescent lighting currently installed using LED light sensitivity. The mood of the music room and art room created by the room color and lighting can improve a learner’s creativity. Approximately 3,000K color-temperature lighting can affect various senses of a student. A psychological assessment of students was carried out under classroom illumination using Relux software. LED replaced the fluorescent lighting in the classroom. As a result, learning increased by approximately 25% with the LED lamps than with fluorescent lamps. In addition, the average illuminance was derived from the illumination law.

최근 에너지 절약과 친환경 조명에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 LED 조명에 대한 연구가 증가되고 있다. LED 조명은 타 조명에 비해 초절전, 친환경, 장수명으로 21세기에 적합한 조명이라고 할 수 있다. 본 연구의 목적은 기존의 LED 등기구 전원구동회로에 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 전류 제어시스템을 장착하여 다양한 LED 등기구에 적합한 전류가변제어시스템을 개발하는 것이다. 이를 위해 가변저항과 보상저항을 이용하여 LED 순방향 전압값에 대한 영향이 최소화되도록 회로를 구성하여 안정적인 전원공급과 전류조 정이 가능하도록 하는 전류가변제어시스템을 제안한다. 본 연구에서 제시한 마이크로 컨트롤러 기반 볼트 레귤레이터 를 이용한 정전류 회로 및 이를 이용한 에너지 절감방법은 발광소자에 불필요한 발열을 최소화할 수 있고, 저항값을 세밀하게 조정할 수 있어 다양한 대용량 LED 등기구에 적용 가능하다. 본 연구는 궁극적으로 안정적인 전류 공급으 로 LED 등기구의 신뢰성을 향상시킬 수 있을 것으로 기대된다.

The purpose of this study is to develope a current variation control system appropriate to the various LED(Light Emitting Diode) lamps using current control system equipped with microcontroller based voltage regulator of power driving circuit. For this, we will suggest a stable control system of current variation to enable a stable power-supply and current-control, consisting of circuit to minimize the affects on the LED forward voltage using variable resistance and compensating resistance. The method of constant current circuit and energy savings using microcontroller based voltage regulator suggested in this study can be applied to various a big capacity LED lamp to minimize the unnecessay heat generation and to control resistace delicately. Ultimately, we expect the results of this study will upgrade the reliability of LED lamp by supplying the current stably.

본 논문에서는 가로등 운용에 있어서 일기예보 및 일조량을 고려한 알고리즘을 제안하였다. 이 알고리즘에 의해 생성된 Weather Factor를 적용하여 보행자가 있을 시에는 가로등의 광량을 최대로 유지하고 보행자가 없을 경우 최대전력을 사용하지 않고 일정한 밝기를 유지하는 대기전력모드를 사용하여 전력소비를 줄였다. 이렇게 함으로써 배터리의 잔량을 확보할 수 있으며 이를 이용하여 부조일이 지속될 경우 운용일수를 최대한 연장하기 위한 적절한 알고리즘을 제안하였다. 또한 이러한 알고리즘에 필요한 Weather Factor의 값을 실험을 통하여 결정하였으며. 모의실 험을 통해 알고리즘의 적합성을 확인하였다.

This study, in the operation of street lamp, suggests appropriate algorithm to extend the number of days of street lamp operation as much as possible if the number of sunless days continues and experimentally determines the value of Weather Factor necessary for this algorithm. This is conducted by reducing electricity consumption and securing battery remains through the use of standby power mode, in which maximum amount of light is maintained if there is a pedestrian, and constant brightness is maintained without utilizing maximum electric power if no pedestrians exist, with the application of WFactor value created by the algorithm considering weather forecast and amount of sunlight.

본 논문에서는 대형 LED lamp용 직렬 공진형 direct ac-dc 컨버터를 제안하였다. 교류상용전원을 통한 LED lamp에 전원 공급 시, 입력전류의 왜곡을 방지하기 위해, PFC ac-dc 컨버터가 적용된다. 하지만 PFC 컨버터의 특성에 따라 회로의 복잡도 및 수용 전력의 한계가 존재한다. 제안된 컨버터는 기존의 전력변환 방식과 다른 형태로서, 교류 쵸퍼(AC chopper)와 직렬공진회로가 혼합된 구성을 가지며, 교류 쵸퍼의 직접 전력 변환을 통해 PFC 회로 구성없이도 고 역률을 획득할 수 있으며, 직렬공진회로를 통하여 제안된 컨버터의 모든 스위치의 영전압 스위칭(ZVS) 턴-온동작을 통해 손실저감을 도모한다. 본 논문에서는 제안된 컨버터의 동작원리를 간단히 설명하고, 250W의 프로토 타입을 통하여 제안된 컨버터의 우수성을 검증한다.

본 논문은 Rear Combination LED Lamp 동작 시 전류와 광출력의 변동폭를 최소화하는 LED 조명광원의 특성을 고려하여 정전류 회로의 구현이 유리한 DC/DC 컨버터의 EMC 고효율 필터를 제안하여 외부의 전자계로부터 장애를 유발하지 않고, 일정 수준의 전자파 환경에서도 오동작 없이 원할하게 작동될 수 있도록 관련 기기 상호간의 전파 환경을 개선하는 고효율 Filter를 제안 하고자 한다. 본 논문에서 제안한 Filter는 EMI 측정을 통해 타당성과 우수성을 검증하였다.

LED has the merits of High reliability, Semi-permanent life, rapid-response and its small size for use as light source of head lamp. But the dependence of its performance and life on temperature affect on its practical use. Which dependence makes problem when the LED is heated up to a higher temperature level by self-generation of heat, due to "highly integration" to get enough quantity of light. To solve this problem, effective cooling system is needed that consider conduction, convection and radiation. This study point out the limits of natural convection cooling system and propose of forced convection with heat sink. Also, describes a correlation between heat sink area and fluid velocity using numerical analysis to optimize of cooling system.

In this paper, we develop a explosion-proof LED lighting (Ex circuit) circuit of Explosion-proof LED Signal Lamp (Ex LSL) to utilize the core module of the explosion-proof Local Control System (Ex LCS) for offshore plant applications. And then analyzed its electrical, optical and thermal characteristics. Ex circuit was applied input voltage from AC/DC(12~254) V. In this experiments, stable light-on characteristics were confirmed by eyes for the every input voltages with min. 78,462 and max. $517,975cd/m^2$ of luminance. also Output current and output luminance was made proportional. Because the measured maximum surface temperature of Ex circuit was $54.23^{\circ}C$ at AC 48 V, Ex circuit was rated with T6 of temperature class. Finally, Ex circuit was shown stable light on characteristics under the $-50^{\circ}C$ and $60^{\circ}C$ during 12 hours of test period.

LED lamp arrangement is a critical issue in indoor visible light communication (VLC) system. In this paper, we analyze the illumination distribution under the arrangement of $2{\times}3$ and propose a method to find the optimal lamp arrangement. The method, based on the MIMO (Multiple Input/Multiple Output) system model and taking the first order reflection into consideration, enables accurate analysis of the arrangement of the LED lamps for any room. The studies show that under the optimal arrangement the uniformity of illumination is improved from 0.55 to 0.86, which guarantees that users can get almost equal lighting effects, no matter where they locate themselves. At the same time, the RMS delay spread distribution which is used to evaluate the inter-signal-interference (ISI) is analyzed, and the simulation results indicate that the optimal arrangement also can improve the communication quality by reducing the fluctuation of the RMS delay spread.

In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

We introduce a new method of time-division visible light communication (VLC) using LED lamp light for the generation of synchronizing pulses. The LED lamp, driven by an AC 220-V power line, radiates light that has a 120-Hz frequency component. The pulse generator in each VLC system receives the LED lamp light and generates the synchronizing pulses that are required for time-division transmission of multiple VLC channels. The pulse period is subdivided into several time slots for VLC channels. In experiments, 120-Hz synchronizing pulses were generated using LED lamp light, and three VLC channels were transmitted independently without interfering with each other in a condition where the VLC signals overlapped in space. This configuration is useful in constructing multiple wireless sensor networks that are safe and without interference in locations where LED lamps are used for illumination.