Earticle

조명은 현재 인류에서는 없어서는 안 될 유효사용 기술 중 하나이다. 이러한 조명은 태양광에 의한 주광조명(晝光照明)과 인공광원을 통해 생성되는 인공조명(人孔照明)이 있으며, 본 논문에서는 전기에너지를 통해 생성되어지는 인공조명의 제어기술과 효율적인운영방안에 대한 연구를 진행하였다. 일차적으로 인체를 감지하기 위하여 Doppler Sensor를 사용하여 인체를 감지하고 이에 대한감지신호를 기반으로 하여 LED조명의 연속디밍 컨트롤 하여 효율적인 에너지 관리를 하기 위한 기술이다. 이와 같이 본 논문에서는전기적인 에너지원을 기초로 하여 LED 조명에 대한 연속 디밍 기법과 도플러 및 적외선센서 융합 기법을 제안하고자 한다.

Illumination is an effective technique that must be in the mankind today. These lights, there is artificial light that is createdby using an artificial light source daylight illumination by sunlight, in this paper, it is created using the electrical energyit is a paper on the study of technology management scheme and efficient control technology of artificial light.

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

This paper presents an inertia type of piezostack based active mount for unmanned aero vehicle (UAV) camera system. After identifying the stiffness and damping properties of the rubber element and piezostack a mechanical model of the active mount system is established. The governing equation of mount is them derived and expressed in a state space farm. Subsequently, a sliding mode controller which is robust to uncertain parameters is designed in order to reduce the vibration imposed according to the military specification associated with UAV camera mount system operation. Control performances such as acceleration and transmitted force are evaluated through both computer simulation and experimental implementation.

최근 TV 와 같은 디스플레이들은 비접촉식 인터랙션에 의해 제어되는 방법을 많이 사용하고 있다. 이를 위한 다양한 방법들 중에서 풀 비전 기반 인터랙션 방법이 사용자에게 가장 자연스러운 접근을 유도한다. 본 논문에서는 이러한 풀 비전 기반 방법으로 같은 시점의 컬러 영상과 적외선 영상을 이용하여 사용자를 인식하고 손 동작을 이용하여 TV 를 제어하는 어플리케이션을 보인다. 이를 위해 적외선 영상과 거리의 관계를 도출하여 어플리케이션에 적용하고 제스쳐 기반으로 TV 를 제어하였다.

This study proposes a frequency-based analysis framework to interpret the internalmechanisms of Generative Adversarial Networks (GANs) for infra-red (IR) image generation. Unlikevisible images, IR images possess distinct physical characteristics, such as thermal distributionsand temperature gradients, corresponding to specific frequency bands. To address the "black-box"nature of GANs, we analyze the generation process using frequency decomposition and layer-wiseattribution via Integrated Gradients. Our diagnosis reveals that standard DCGANs exhibit spectralbias, leading to high-frequency artifacts. To mitigate this, we incorporate Focal Frequency Loss(FFL) into the training process. The analysis demonstrates that FFL stabilizes spectral formationacross layers and distributes the generative burden, effectively suppressing artifacts. Quantitativeresults show a significant improvement in the Frechet Inception Distance (FID) from 324.65 to250.52. This research provides domain-specific guidelines for designing controllable andexplainable IR generation models by linking neural network behaviors with physical thermalcharacteristics.

본 논문에서는 30 Hz의 프레임률로 동작하는 적외선 영상 투사기 (IR scene projector, IRSP)에서 투사되는 적외선 영상의 유효온도 감소를 최소화하기 위해 sub-frame 제어 기법을 적용한 IRSP용 신호입력회로 (read-in integrated circuit, RIIC)를 제안한다. 제안하는 sub-frame 제어 기법은 단위 프레임을 8개의 sub-frame으로 나누어 동일한 영상 데이터를 8회 refresh함으로써 픽셀 내 커패시터에 sampling된 영상 데이터가 유지 기간 동안 MOSFET 스위치를 통한 누설 전류로 인해 손실되는 정도를 감소시킨다. Emitter에서 투사되는 적외선 영상의 높은 유효온도를 위해 전류 구동형 RIIC를 설계하였으며, 외부의 DAC로부터 아날로그 전압 형태의 영상 데이터를 전송 받는다. 시제품 $64{\times}32$ RIIC array 칩은 매그나칩/SK하이닉스 $0.35{\mu}m$ 2-poly 4-metal CMOS 공정으로 제작되었으며, 출력 가능한 최대 데이터 전류는 $230.3{\mu}A$이다. 이를 $15k{\Omega}$의 저항 값을 갖는 시제품 emitter 소자에 인가할 시 mid-wavelength IR (MWIR) 대역을 기준으로 최대 $366.2^{\circ}C$의 유효온도를 갖는 적외선 영상의 투사가 가능하다.

In this paper, a read-in integrated circuit (RIIC) for IR scene projectors (IRSPs) adopting a sub-frame control technique is proposed, which minimizes the reduction of the apparent temperature of the IR images projected from IRSPs operating at a frame rate of 30 Hz. The proposed sub-frame control technique significantly reduces the amount of scene data loss on capacitors, which is caused by leakage currents flowing through MOSFET switches during holding periods, by dividing a unit frame into 8 sub-frames and refreshing the same scene data for each sub-frame. A current-drive RIIC was designed for the higher apparent temperature of IR radiated from the emitter, and it receives the scene data as a form of analog voltages from an external DAC. A prototype chip with a $64{\times}32$ RIIC array was fabricated using Magnachip/SKhynix $0.35{\mu}m$ 2-poly 4-metal CMOS process, and the measured maximum output data current is $230.3{\mu}A$. This amount of current ensures the projection of IR images whose maximum apparent temperature is $366.2^{\circ}C$ in the mid-wavelength IR (MWIR) when applied to a prototype emitter having a resistance of $15k{\Omega}$.