Earticle

기후위기 대응을 위해 우리나라는 「탄소중립·녹색성장 기본법」에 근거하여2030년까 지2018년 온실가스 배출량 대비40% 감축이라는NDC 목표를 수립하였으며, 이를 달성 하기 위한 산업 현장 적용 가능한 탄소 포집 기술의 실증이 시급한 과제로 부상하고 있다. 특히 청정에너지원으로 주목받는 수소 생산(SMR 공정)은 수소1톤 생산 시 약10 톤의 이산화탄소를 배출하며, 국내 수소 생산 사업장의 지속적인 확대로 포집 기술의 의무적 적용 필요성이 높아지고 있다. 본 연구에서는 평택수소생산기지 내 상용급 플랜트(80톤/일)를 구축하고, 중공사 멤 브레인을 활용한 분리막 포집 기술과 한국에너지기술연구원 개발KIERSOL을 적용한 습식 포집 기술을 각35톤/일 규모로 통합 구축하는 하이브리드 포집 시설을 구축후 실증을 수행하였다. 포집된 이산화탄소는–33℃, 19.5 bar 조건의 액화탄산 공정을 통 해 고순도 액화탄산가스로 전환되며, 배관을 통해 이송되어 부지내에서 직접 활용하여 드라이아이스 제조에 활용되는 CCU 기반 순환 체계를 구현한다. 이질적인 두 포집 기술의 상용급 통합 실증은 단일 기술 대비 안정성과 경제성을 향상시키는 레퍼런스 모델로서 학술적 가치가 있으며, 본 시설의 안정적 운영 시 연간 약17,700톤의 이산화탄소 저감이 기대된다. 본 연구 결과는 국가NDC 목표 달성 및 2050 탄소중립 실현에 기여하는 핵심 실증 데이터로 활용될 것으로 전망된다.

본 연구의 목적은 호소의 정체로 인한 발생되는 호소내부의 현상을 개선하고자, 호소에 밀도류를 유발하는 장치를 투입하여 호소의 수체를 순환함(윤정환 등, 2010)으로써 호소의 정체에 따르는 현상을 개선하고져 한다. 따라서 호소는 성층화나 부영양화현상을 예방하는 물리적 조건이 조성될 것으로 판단된다. 이를 위해 밀도류를 발생시킴으로써 물순환을 유도하는 장치인 DCG(density current generator)를 대상호소에 적용하였을 때 그 효과를 분석하고자 호소수의 용존산소, 수온, 염분의 시공간적 분포를 조사, 분석하였다.

The purpose of this study was to investigate on the improvement of water quality in lakes which are polluted by contaminants internal and external of lakes. For this DCG, a purifier using natural phenomenon called density current, was applied to target lake, and the change of water quality (DO, Temperature, Salinity) before and after the operation were compared and analyzed. Also, another purpose is to take advantage of this as a basic material for improving water quality of fresh water lakes, dams and reservoirs frequently experiencing similar problems like eutrophication.

Urban-rural consolidated cities face ongoing problems such as an imbalance in public services and living conditions between urban and rural areas because of Korea's urban-centered development of the past. Korea is establishing a master plan for parks and greenbelts to resolve this imbalance in the area of public green space, but the analytical indicators for the status of public green space services focus on physical status, which limits practical improvements. To derive practical measures for improving the imbalance in public green space services within urban-rural consolidated cities, Anseong City was chosen as the site for a comparative study of the physical status of each living zone and a survey of residents' perceptions. This study found the Eastern living zone to have the largest deficit in public green space services but reported high satisfaction with such services. Regardless of the physical extent of the public green space service, satisfaction is higher if roads and linear green spaces, such as tree-lined streets and green belts along rivers, are adjacent to living infrastructure and easy to access and use. This study shows that citizens' satisfaction is affected not only by the physical status but also by the type, accessibility, and function of public green spaces. It can be seen as a preliminary study reflecting residents' perceptions of public green space services in the future.

The National Strategy for Carbon Neutrality and Green Growth has positioned landscape architecture as a key carbon-sink sector. This study has applied a Building Information Modeling BIM-based simulation to Gongdo Neighborhood Park No. 4, a new sink designated in Anseong's first carbon-neutral and green growth plan. Environmental performance was quantified using domestic allometric models embedded in a tree BIM library that simulated growth-driven changes from 2025 to 2050. The results have shown a steady increase in all indicators, thus demonstrating the capability of BIM to integrate planting design with performance verification and long-term scenario analysis. The proposed workflow provides a quantitative foundation for assessing sink capacity, and offers a practical tool for evidence-based landscape planning and management to achieve carbon neutrality.

생활습관 개선을 통한 근육량향상은 대사 증후군의 위험을 줄이는 것으로 보고되었다. 본 연구에서는 갈조류인 고리매(Scytosiphon lomentaria) 에탄올 추출물이 골격근 성장억제조절 단백질인 마이오스타틴 신호전달을 억제하는지와 고 급식으로 유도된 비만 제브라피시의 대사 항상성에 대한 효과를 확인하였다. 고리매 에탄올 추출물(10 ㎍/ml)은 pGL3- (CAGA) 12-루시퍼라제 분석에서 마이오스타틴(1 nM/ml) 신호를 완전히 차단하였다. 또한 웨스턴 블롯 분석에서 마이오스타틴 신호를 차단하여 Smad2 인산화가 억제되는 것을 확인하였다. 제브라피쉬의 치어에 대한 연구는 고 급식 대조군 그룹의 체내 포도당 농도는 정상 급식 대조군 그룹보다 유의하게 높았지만, 12.5 ug의 고리매 에탄올을 처리한 고 급식 그룹과 18.75 ug의 고리매 에탄올로 처리한 고 급식 그룹의 체내 포도당 수준은 정상 급식 대조군 그룹과 유사하였다. 고 급식 그룹의 GLUT2 유전자의 mRNA 발현 수준은 정상 급식 대조군 그룹에 비해 현저히 낮았다. 하지만, 고리매 에탄올 추출물을 처리한 실험군 그룹의 GLUT2 유전자의 발현은 정상 급식 대조군 그룹의 GLUT2 유전자의 발현과 거의 유사하게 나타났다. 그러므로 고리매 에탄올 추출물은 GLUT2유전자의 발현 조절을 통하여 체내 포도당 조절이 가능함을 보여준다. 본 연구의 결과는 고리매 에탄올 추출물이 대사 증후군 치료에 도움을 주는 소재 및 마이오스타틴 억제제로서의 가능성을 시사합니다.

Muscle mass improvement through lifestyle modification has been shown to reduce the risk of metabolic syndrome. This study examined the capacity of ethanol extracts of Scytosiphon lomentaria (SLE) to suppress the bioactivity of myostatin, a potent negative regulator of skeletal muscle mass, as well as the effect of SLE treatment on metabolic homeostasis in obese zebrafish induced by high feeding. A total of 10 ㎍/ml SLE completely blocked myostatin (1 nM/ml) signaling in the pGL3-(CAGA)₁₂ luciferase assay and suppressed myostatin-induced Smad2 phosphorylation in the Western blot analysis. In the zebrafish larvae analysis, the whole body glucose concentration of the high feeding control (HFC) group was significantly higher than that of the normal feeding control (NFC) group. However, the glucose levels of the high feeding group treated with 12.5 ug SLE and of the high feeding group treated with 18.75 ug SLE were similar to those of the NFC group. The mRNA expression level of the GLUT2 gene of the HFC group was significantly lower than that of the NFC group. SLE treatment restored the expression of the GLUT2 gene to a level that was close to that of the NFC group, indicating that SLE is capable of regulating glucose levels in zebrafish larvae. The current results highlight the potential of SLE as a natural MSTN inhibitor and supplement that can be used to facilitate the treatment of metabolic syndrome.

본 논문에서는 차기구축함에 탑재될 통합 마스트의 레이더 반사면적을 감소시킬 수 있는 스텔스 기술로 응용하기 위해 해양 환경이 모사된 온도 환경 조건에서 전자기파 메타물질 흡수체의 내구성을 검증하였다. 이를 위해 미국 군사 규격인 MIL-STD-810H의 Method 501.7 중 Procedure I 조건에 따라 주기적으로 온도를 조절할 수 있는 항온 챔버에 저장 후 전자기파 메타물질 흡수체의 반사도를 측정하였다. 고온 환경시험 전과 후 모두 X 밴드 전체에서 스텔스 성능을 충족시킬 수 있는 -10 dB 미만의 반사도가 확인되었다.

In this paper, the durability of an electromagnetic metamaterial absorber is verified in a temperature varying condition mimicking a maritime environment for the purpose of applying it to reduce the radar cross section of an integrated mast of the next-generation destroyer. To validate the durability, the reflectance of the electromagnetic metamaterial absorber was measured after storing it in a chamber that can control the temperature according to Procedure I of Method 501.7 included in MIL-STD-810H. Before and after the environmental test, both of the measured reflectances were retained less than -10 dB over the X band, that can guarantee the stealth functionality.

In this paper, the data retention characteristics were analyzed to find out the thickness effect on the trap energy distribution of silicon nitride in the silicon-oxide-nitride-oxide-silicon (SONOS) flash memory devices. The nitride films were prepared by low pressure chemical vapor deposition (LPCVD). The flat band voltage shift in the programmed device was measured at the elevated temperatures to observe the thermal excitation of electrons from the nitride traps in the retention mode. The trap energy distribution was extracted using the charge decay rates and the experimental results show that the portion of the shallow interface trap in the total nitride trap amount including interface and bulk trap increases as the nitride thickness decreases.

The reliability of 3D NAND flash memory cell is affected by the charge migration which can be divided into the vertical migration and the lateral migration. To clarify the difference of two migrations, the activation energy of the charge loss is extracted and compared in a conventional square device pattern and a new test pattern where the perimeter of the gate is exaggerated but the area is same. The charge loss is larger in the suggested test pattern and the activation energy is extracted to be 0.058 eV while the activation energy is 0.28 eV in the square pattern.

As the NAND flash memory goes to 3D vertical Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) structure, the lateral charge migration can be critical in the reliability performance. Even more, with miniaturization of flash memory cell device, just a little movement of trapped charge can cause reliability problems. In this paper, we propose a method of predicting the trapped charge profile in the retention mode. Charge diffusivity in the charge trapping layer (Si3N4) was extracted experimentally, and the effect on the trapped charge profile was demonstrated by the simulation and experiment.

In this paper, IGZO thin film transistor (TFT) was fabricated with cross-linked Poly (4-vinylphenol) (PVP) gate dielectric for flexible, transparent display applications. The PVP is one of the candidates for low-temperature gate insulators. MIM structure was fabricated to measure the leakage current and evaluate the insulator properties according to the annealing temperature. Low leakage current ( <0.1nA/cm2 @ 1MV/cm ) was observed at $200^{\circ}C$ annealing condition and decreases much more as the annealing temperature increases. The electrical characteristics of IGZO TFT such as subthreshold swing, mobility and ON/OFF current ratio were also improved, which shows that the performance of IGZO TFTs with PVP can be enhanced by reducing the amount of incomplete crosslinking in PVP.

본 연구에서는 전산유체역학 프로그램을 이용하여 순환형공기분급기 내부유동 및 입자거동을 해석하였다. 주날개 및 분급날개의 회전속도 조건을 변화시키며 이에 따른 등급분급효율, 절단입경 및 분급첨예도 변화를 예측하였다. 주날개의 회전속도를 제어함으로써, 절단입경을 증가시킬 수 있었으나, 오염토양 분급에 적용할 수 있을 정도의 정확도를 확보할 수 없었다. 반면, 분급날개의 회전속도를 증가시킴으로써, 절단입경을 감소시킬 수 있었으며, 보다 정확하게 입자를 선별할 수 있었다. 결과적으로 주날개와 분급날개를 동시에 사용할 경우, 높은 분급첨예도 결과를 보이며, 우수한 분급특성을 유지할 수 있었다.

In this study, we performed numerical simulations on a circulating air classifier using a commercial computational fluid dynamics program. The variations in the grade efficiency, the cut-size and the cut-sharpness were calculated and discussed. By controlling the rotating speed of the main fan, the cut-size could be rapidly increased. However the linearity of the cut-size variation with respect to the main fan speed was not sufficient for application to contaminated soil classification processes. On the other hand, by varying the rotating speed of the classifying fan, the cut-size gradually decreased and could be precisely adjusted. Using both the main fan and the classifying fan, we could achieve larger cut-sharpness values and better classifying performances.

In this study, we fabricated a TFT gas sensor with ZnO nanorods grown by hydrothermal synthesis. The suggested devices were compared with the conventional ZnO film-type TFTs in terms of the gas-response properties and the electrical transfer characteristics. The ZnO seed layer is formed by atomic-layer deposition (ALD), and the precursors for the nanorods are zinc nitrate hexahydrate ($Zn(NO_3)_2{\cdot}6H_2O$) and hexamethylenetetramine ($(CH_2)6N_4$). When 15 ppm of NO gas was supplied in a gas chamber at $150^{\circ}C$ to analyze the sensing capability of the suggested devices, the sensitivity (S) was 4.5, showing that the nanorod-type devices respond sensitively to the external environment. These results can be explained by X-ray photoelectron spectroscopy (XPS) analysis, which showed that the oxygen deficiency of ZnO nanorods is higher than that of ZnO film, and confirms that the ZnO nanorod-type TFTs are advantageous for the fabrication of high-performance gas sensors.

In this paper, atmospheric pressure plasma treatment was proposed for high performance indium gallium zinc oxide thin film transistor (IGZO TFT). RF Ar plasma treatment is performed at room temperature under atmospheric pressure as a simple and cost effective channel surface treatment method. The experimental results show that field effect mobility can be enhanced by $2.51cm^2/V{\cdot}s$ from $1.69cm^2/V{\cdot}s$ to $4.20cm^2/V{\cdot}s$ compared with a conventional device without plasma treatment. From X-ray photoelectron spectroscopy (XPS) analysis, the increase of oxygen vacancies and decrease of metal-oxide bonding are observed, which suggests that the suggested atmospheric Ar plasma treatment is a cost-effective useful process method to control the IGZO TFT performance.

In this paper, solution based Indium Zinc Oxide thin film transistors (IZO TFTs) were fabricated with PVP gate dielectric. To enhance the electrical properties, UV-O3 treatment is proposed on solution based IZO TFTs. The gate leakage current and interface trap density is compatible with conventional ZnO-based TFT with inorganic gate insulator. Especially, the UV-treated device shows improved electrical characteristics compared to the untreated device. These results can be explained by X-ray photoelectron spectroscopy (XPS) analysis, which shows that the oxygen vacancy of UV-O3 treatment is higher than that of no treatment.

Cause of contamination in the study area nearby Jang Hang Refinery is dust scattering in refinery stack, and soil washing treatment is one of the proper technologies for soil remediation in this area. Site conditions frequently limit the selection of a treatment process. A treatment technology may be eliminated based on the soil classification or physicochemical characteristics of soil. This study was assessed the soil washing efficiency by conducting of soil characteristic analysis in the vicinity of Jang Hang Refinery Stack within a 2 km radius. Also, it was decided about remedial range with comparative analysis of As in soil by Korean Standard Test Method before/after revision, whereupon As concentration in soil showed a increasing tendency after revision. As a result, the soil washing using the size separation of soil was determined through identifying of As species in the soil. In this site, only particle size distribution and water content of soil can provide the initial means of screening for the potential use of soil washing.

Recently the use of ultra high strength steels (UHSS) in structural and safety component is rapidly increasing in the automotive industry. For example, 1.5GPa grade hot stamping with die-quenching of boron steel 22MnB5 could apply crash-resistant parts such as bumpers and pillars. The development of laser welding process of hot stamping steels, fundamental bead-on-plate welding and lap joint welding test were carried out using 3kW Nd:YAG laser. Local hardening & HAZ softening occurred in hot stamping steel as a result of metallurgical change caused by the welding heat input in the Nd:YAG laser welding process. The size of soft zones in the hot stamping steel was related to the welding heat input, being smaller at high speeds which generated a smaller heat input. Also in the case of lap joint design structure, same welded characteristics were shown. The HAZ softening degree was controlled to ensure the joint strength.

The status of contaminated soils vary widely ; therefore, the techniques and equipment applicable to the soil concerned should be selected and used after careful consideration. Hyundai Soil Washing is physical-chemical separation based on mining and mineral processing principles for removing a broad range of organic and inorganic contaminants from soil. Mobile plant(capacity 15 tons./hr) was installed for this project. The goals of this project were 1) to verify the applicability of the washing process, which showed reliable results in the pilot plant with various kind of contaminated soils and 2) to promote recycling of the washed soil as a backfill on site. The results revealed that $F^-$ and $Pb^{2+}$ in the soil were effectively washed out to a certain level which washed soil was acceptable for recyeling.

청과물의 품질 영양표시 모델을 개발하기 위하여 경북의성군 옥자두를 대상으로 품질 및 영양적 성분을 분석하고 품질 영양표시 모델을 확립하였다. 일반성분은 수분 92%, 조단백 0.74%, 조지방 0.64%, 조섬유 1.65%, 조회분 0.32%, 무질소물 4.29%로 확인되었으며, 열량은 32kcal/100g 으로 계산되었다. 당도는 $10.33{\pm}0.85Brix^{\circ}$로, 산도는 $1.08{\pm}0.12%$로 나타났으며, 자두의 비타민 C 함량은 $7.037{\pm}0.317mg%$로 나타났다. 무기질은 황, 칼륨, 칼슘, 나트륨, 마그네슘 등의 순으로 함량이 높았고, 주요 유리당으로는 과당, 포도당, 자당로 나타났다. 유기산으로는 호박산, 사과산, 구연산이 확인되었다. 총 페놀화합물의 함량은 과육과 과피 간에 현저하게 차이를 보였으며 전과로는 $75.55{\pm}0.73mg%$의 함량을 보였다. 품질 표시에는 당과 산 함량, 영양 정보 표시에는 열량, 미네랄, 비타민 C, 총 페놀 성분이 표기된 자두의 품질 영양 표시 모델을 개발하여 제시하였다.

In order to develop a model on the quality and nutrition label of Korean fruit plum, we first examined the quality and nutritional characteristics of Korean Plum, ChooHee. The contents of moisture, crude protein, crude fat, crude fiber, crude ash and N-free extinct were 92% 0.74% 0.64% 1.65%, 0.32% 4.29% respectively. Thus the total calorie of the sample was 32 kcal/100 g. The content of sugar, acidity and Vitamin C were $33{\pm}0.85 Bx^{\circ}$, $1.08{\pm}0.12%$ and $7.037{\pm}0.317mg%$ respectively. The principle minerals were S, K, Ca, Na, and Mg. Major free sugars were fructose, glucose and sucrose and major organic acid were succinic acid, malic acid and citric acid. The difference of contents of total phenols between peel and flesh pare were considerable. The total phenolic contents of whole fruit were $75.55{\pm}0.73mg%$. On the above results, the quality and nutrition label of Korean plum were developed in the first time. We expect that this study on labeling could play an important role to the quality control and marketing of Korean agricultural products.

This study examined the clothing behavior in terms of creativity, individuality and conformity. The subjects were 317 boys(mean age: 18) and 312 girls(mean age: 18) in third grade of high school, in which were situated at north and south part of Han-River in Seoul. They were administered with the following questionnaires to measure the attitudinal and behavioral conformity, creativity, individuality, clothing conformity, clothing nonconformity, clothing confidence, aesthetic sense, clothing importance, fashionability. Results indicated that (1) high school students who have high creativity showed higher scores in clothing nonconformity, clothing confidence, aesthetic sense, clothing importance than those who have low creativity. But there were no significant differences between two groups in clothing conformity and fashionability(p<0.001). (2) High school students who have high individuality showed higher scores in clothing conformity clothing, nonconformity, clothing confidence, aesthetic sense, clothing importance and fashionability than those who have low individuality(p<0.001). (3) Students who have low attitudinal conformity showed higher scores in clothing nonconformity, clothing confidence and aesthetic sense(p<0.001) and lower score in information and norm specific clothing confirmity(p<0.05) than those who have high attitudinal conformity. And those who have high behavioral conformity showed higher score in clothing confirmity than those who have low behavioral confirmity(p<0.05). From these findings, we could find that the importance of creativity and individuality was greater than that of conformity in clothing behavior. These results were discussed and following studies were suggested.