Earticle

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

Skin region detection in images is an important process in many computer vision applications targeting humans such as hand gesture recognition and face identification. It usually starts at a pixel-level, and involves a pre-process of color spae transformation followed by a classification process. A color space transformation is assumed to increase separability between skin classes and other classes, to increase similarity among different skin tones, and to bring a robust performance under varying imaging conditions, without any complicated analysis. In this paper, we examine if the color space transformation actually brings those benefits to the problem of skin region detection on a set of human hand images with different postures, backgrounds, people, and illuminations. Our experimental results indicate that color space transfomation affects the skin detection performance. Although the performance depends on camera and surround conditions, normalized [R, G, B] color space may be a good choice in general.

PACS is an integrated communication network system which is consists of image acquisition devices, storage archiving units, display stations, computer processors, and database management systems. In medical industry, they have been introduced the medical equipments through PACS systems based on the DICOM standard. In this paper, we have reviewed the performance of JPEG and JPEG2000 used as medical image compression and realized the transmission mode on DICOM standard.

the power of influence of the Internet grows steadily, attacks against the Internet can cause enormous monetary damages nowadays. A worm can not only replicate itself like a virus but also propagate itself across the Internet. So it infects vulnerable hosts in the Internet and then downgrades the overall performance of the Internet or makes the Internet not to work. To response this, worm detection and prevention technologies are developed. The worm detection technologies are classified into two categories, host based detection and network based detection. Host based detection methods are a method which checks the files that worms make, a method which checks the integrity of the file systems and so on. Network based detection methods are a misuse detection method which compares traffic payloads with worm signatures and anomaly detection methods which check inbound/outbound scan rates, ICMP host/port unreachable message rates, and TCP RST packet rates. However, single detection methods like the aforementioned can't response worms' attacks effectively because worms attack the Internet in the distributed fashion. In this paper, we propose a design of distributed worm detection system to overcome the inefficiency. Existing distributed network intrusion detection systems cooperate with each other only with their own information. Unlike this, in our proposed system, a worm detection system on a network in which worms select targets and a worm detection system on a network in which worms propagate themselves cooperate with each other with the direction-aware information in terms of worm's lifecycle. The direction-aware information includes the moving direction of worms and the service port attacked by worms. In this way, we can not only reduce false positive rate of the system but also prevent worms from propagating themselves across the Internet through dispersing the confirmed worm signature.

The objects, which can be personal digital assistants, electronic rings, doors or even clothes, offer embedded chips with computation facilities and are generally called artifacts. I later realized that this was not so the real problem is actually authentication. Recent results indicate scalability problems for flat ad hoc networks. Sensor network achieves function that handle surrounding information perception through sensor and sensed information to network that is consisted of sensor nodes of large number. Research about new access control techniques and height administration techniques need authentication information persons' certification assurance level classification in sensor network environment which become necessary different view base with authentication information at node for application of AAA technology in USN environment that must do authentication process using information that is collected from various sensor mountings. So, get base authentication information in sensor type and present weight grant model by security strength about authentication information through information who draw. In this paper collected information of sensor nodes model who give weight drawing security reinforcement as authentication information by purpose present be going to. and Must be able to can grasp special quality of each sensor appliances in various side and use this and decide authentication assurance level for value estimation as authentication information elements. Therefore, do to define item that can evaluate Authentication information elements thus and give simple authentication assurance level value accordingly because applying weight. Present model who give authentication assurance level value and weight for quotation according to security strength.

Genetic algorithm based predictor for lossless image compression is propsed. We describe a genetic algorithm to learn predictive model for lossless image compression. The error image can be further compressed using entropy coding such as Huffman coding or arithmetic coding. We show that the proposed algorithm can be feasible to lossless image compression algorithm.

This paper proposes a fuzzy correction algorithm that can correct the distorted medical image caused by the scanning nonlinear velocity of the Digital X-ray Scanner System (DX-Scanner) using the Multichannel Ionization Chamber (MIC). In the DX-Scanner, the scanned medical image is distorted for reasons of unsuitable integration time at the nonlinear acceleration period of the AC servo motor during the inspection of patients. The proposed algorithm finds the nonlinear motor velocity modeling through fuzzy system by clustering and reconstructs the normal medical image lines by calculating the suitable moving distance with the velocity of the motor using the modeling, acceleration time and integration time. In addition, several image processing is included in the algorithm. This algorithm analyzes exact pixel lines by comparing the distance of the acceleration period with the distance of the uniform velocity period in every integration time and is able to compensate for the velocity of the acceleration period. By applying the proposed algorithm to the test pattern for checking the image resolution, the effectiveness of this algorithm is verified. The corrected image obtained from distorted image is similar to the normal and better image for a doctor's diagnosis.

Wireless 1394 over IEEE802.15.3 must allow a data reserved for delivery over a wired 1394 network to be delivered over an IEEE802.15.3 wireless network through bridging IEEE 1394 to IEEE802.15.3. Isochronous transfers on the 1394 bus guarantee timely delivery of data. Specifically, isochronous transfers are scheduled by the bus so that they occur once every and require clock time synchronization to complete the real-time data transfer. IEEE1394.1 and Protocol Adaptation Layer for IEEE1394 over IEEE802.15.3 specify clock time synchronization for a wired 1394 bus network to a wired 1394 bus network and wireless 1394 nodes, which are IEEE802.15.3 nodes handling 1394 applications, over IEEE802.15.3. Thus, the clock time synchronizations are just defined within a homogeneous network environment like IEEE1394 or IEEE802.15.3 until now. This paper proposes new clock time synchronization method for wireless 1394 heterogeneous networks between 1394 and 802.15.3. If new method is adopted for various wireless 1394 products, consumer electronics devices such as DTV and Set-top Box or PC devices on a 1394 bus network can transmit real time data to the AV devices on the other 1394 bus in a different place via IEEE 802.15.3.

The Home Phoneline Networking Alliance (HomePNA) 2.0 technology can establish a home network using existing in-home phone lines, which provides a channel rate of 4 - 32 Mbps. HomePNA 2.0 Medium Access Control (MAC) protocol adopts an IEEE 802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method, a Quality of Service (QoS) algorithm, and a Distributed Fair Priority Queuing (DFPQ) collision resolution algorithm. In this paper, we analyze the HomePNA 2.0 MAC protocol and propose the architecture of HomePNA 2.0 MAC controller circuit. Then, we present the simulation result of each block included in the HomePNA 2.0 MAC controller.

WUSB is a new technology which combines the speed and the security of wired USB with the easy use of wireless technology. In this paper, GUI for WUSB is designed and implemented to show the connectivity and contents of the WUSB devices. Also, the proposed GUI shows the log window while content transfers occur between the host and device. The proposed GUI can be used for various wireless technologies which provide wireless function with existing USB hosts and devices.

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as WCDMA system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a WCDMA digital transmission system. The average frame error rate degradations are presented. From these experimental results, we show that in all practical cases UWB system can coexist with WCDMA terminal without causing any dangerous interference.

this paper the platform system for IEEE 802.15.4 Low Rate WPAN is designed and fabricated. IEEE 802.15.4 Low Rate WP AN system serves the functions and realization of home-area network. According to the IEEE 802.15.4 standard, there are two modes, One is BPSK modulation in 868/915MHz frequency band. The other is O-QPSK modulation in 2.45GHz frequency band. In this paper we implemented the platform system mounted in one PCB board in 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. We measured that the platform system which consists of digital part and RF part has good performance. Also RF part is realized by design and fabrication of the RF transceiver IC. The key issue is to make the platform system which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

UWB is the most spotlighted wireless technology that transmits data at very high rates using low power over a wide spectrum of frequency band. UWB technology makes it possible to transmit data at rate over 100Mbps within 10 meters. To preserve important header information, MBOFDM UWB adopts Reed-Solomon(23,17) code. In receiver, RS decoder needs high speed and low latency using efficient hardware. In this paper, we suggest the architecture of RS decoder for MBOFDM UWB. We adopts Modified-Euclidean algorithm for key equation solver block which is most complex in area. We suggest pipelined processing cell for this block and show the detailed architecture of syndrome, Chien search and Forney algorithm block. At last, we show the hardware implementation results of RS decoder for ASIC implementation.

USB has arguably become the most successful PC peripheral interconnect ever defined. As appearing UWB, wireless USB (WUSB) emerges very popular technology. However, the distributed Medium Access Control (MAC) does not harmonize with the topology of WUSB. In this paper, we address a novel MAC protocol for conformity with WUSB. The protocol is to handle negotiation on Distributed Reservation Protocol (DRP) including the channel time slot of WUSB.

Recently, the RFID(Radio Frequency Identification) technology has gained significant attention. One of the performance issues in RFID systems is to resolve the tag collision among responses from RFID tags. In this paper, we proposed a new scheme for estimation of the number of tags in the reader filed. The scheme is used by anti-collision algorithm to identify multiple tags efficiently. And we also present the simulation result that shows the proposed scheme to estimate tags efficiently and also to improve the systems efficiency.

Ubiquitous computing is one of the key technology areas in the "Project on Development of Ubiquitous computing and network technology" promoted by the Ministry of Science and Technology as a frontier business of the century in Korea, which is based on the new concept merging physical space and computer-based cyber space. With recent advances in Micro Electro Mechanical System (MEMS) technology, low cost and low-power consumption wireless micro sensor nodes have been available. Using these smart sensor nodes, there are many activities to monitor real world, for example, habitat monitoring, earthquake monitoring and so on. In this paper, we introduce web-based real environment monitoring system incorporating wireless sensor nodes. It collects sensing data produced by some wireless sensor nodes and stores them into a database system to analyze. Our environment monitoring system is composed of a networked camera and environmental sensor nodes, which are called Mica2 and developed by University of California at Berkeley. We have modified and ported network protocols over TinyOS and developed a monitoring application program using the MTS310 and MTS420 sensors that are able to observe temperature, relative humidity, light and accelerator. The sensed data can be accessed user-friendly because our environment monitoring system supports web-based user interface. Moreover, in this system, we can setup threshold values so the system supports a function to inform some anomalous events to administrators. Especially, the system shows two useful pre-processed data as a kind of practical uses: a discomfort index and a septicity index. To make both index values, the system restores related data from the database system and calculates them according to each equation relatively. We can do enormous works using wireless sensor technologies, but just environment monitoring. In this paper, we show just one of the plentiful applications using sensor technologies.

There are emerging many eScience applications. More and more scientists want to collaborate on their investigation with international partners without space limitation by using these applications. Since these applications have to analyze the massive raw data, scientists need to send and receive the data in short time. So today's network related requirement is high speed networking. The key point of network performance is transport protocol. We can use TCP and UDP as transport protocol but we use TCP due to the data reliability. However, TCP was designed under low bandwidth network, therefore, general TCP, for example Reno, cannot utilize the whole bandwidth of high capacity network. There are several TCP variants to solve TCP problems related to high speed networking. They can be classified into two groups: loss based TCP and delay based TCP. In this paper, I will compare two approaches of TCP variants and propose a hybrid approach for high speed networking.

We have investigated on the development of 2-2 piezocomposites that have better piezoelectric activity and lower acoustic impedance than those of conventional piezoceramics. In this study, we have investigated the piezoelectric and acoustic properties of 2-2 piezocomposites sensor which were fabricated using dice-and-fill technique for the different volume fraction of PZT. The resonance characteristics measured by an impedance analyzer were similar to the analysis of finite element method. The resonance characteristics and the electromechanical coupling factor were the best when the volume fraction PZT was 0.6. It also showed the highest result from the standpoint of sensitivity, bandwidth and ring-down property and so on at the same condition. The specific characteristics shows that the 2-2 piezocomposites turned out to be superior to the ultrasonic sensor composed by single phase PZT.

Developable surface plays an important role in computer aided design and manufacturing systems. This paper is concerned with improving the develop ability of mesh. Since subdivision is an efficient way to design complicated surface, we intend to improve the developability of the mesh obtained from Loop subdivision. The problem is formulated as a constrained optimization problem. The optimization is performed on the coordinates of the points of the mesh, together with the constraints of minimizing shape difference and maximizing developability, a developability improved mesh is obtained.

A context-aware services platform supporting mobile agents consists of sensor nodes and a sensor coordinator. Sensor nodes collect environmental information and transmit the collected information to the sensor coordinator through wireless sensor networks. The sensor coordinator passes the information to the context-aware service module, and the mobile agent. The context-aware service module or the mobile agent performs services suitable for a user's situation based on the environmental information and a service actuation message is delivered to an actuation node through the sensor coordinator. In this paper, we present a context-aware services platform structure employed in our project, and describe context-aware services platform interfaces with a context-aware service module and mobile agents.

In this paper, an image-based "approach-align -grasp" visual servo control design is proposed for the problem of object grasping, which is based on the binocular stand-alone system. The basic idea consists of considering a vision system as a specific sensor dedicated a task and included in a control servo loop, and we perform automatic grasping follows the classical approach of splitting the task into preparation and execution stages. During the execution stage, once the image-based control modeling is established, the control task can be performed automatically. The proposed visual servoing control scheme ensures the convergence of the image-features to desired trajectories by using the Jacobian matrix, which is proved by the Lyapunov stability theory. And we also stress the importance of projective invariant object/gripper alignment. The alignment between two solids in 3-D projective space can be represented with view-invariant, more precisely; it can be easily mapped into an image set-point without any knowledge about the camera parameters. The main feature of this method is that the accuracy associated with the task to be performed is not affected by discrepancies between the Euclidean setups at preparation and at task execution stages. Then according to the projective alignment, the set point can be computed. The robot gripper will move to the desired position with the image-based control law. In this paper we adopt a constant Jacobian online. Such method describe herein integrate vision system, robotics and automatic control to achieve its goal, it overcomes disadvantages of discrepancies between the different Euclidean setups and proposes control law in binocular-stand vision case. The experimental simulation shows that such image-based approach is effective in performing the precise alignment between the robot end-effector and the object.

Non-contact power supply (NCPS), as a clean and safe energy supply concept has been applying wildly. Comparing with the conventional transformer the non-contact transformer has a large air gap between the long primary winding and the secondary winding. Due to it, the non-contact transformer has increased leakage inductance and reduced magnetizing inductance. So the high frequency series resonant converter has been widly used on the non-contact power supply system for transferring the primary power to the secondary one, from what a high influence voltage can be gained on the secondry coil even though the large air gap exists. However, it still has the disadvantages of the load sensitive voltage gain characteristics when load is changing. In this paper, we propose a fuzzy logic controller to adjust the frequency of the inverter to track the resonat which is changing when the load is change.

We present a device model for organic light emitting diodes(OLEDs) which includes charge injection, transport, recombination, and space charge effects in the organic materials. The model can describe both injection limited and space charge limited current flow and the transition between them. Calculated device current, light output, and quantum and power efficiency are presented for different cases of material and device parameters and demonstrate the improvements in device performance in bilayer devices. These results are interpreted using the calculated spatial variation of the electric field, charge density and recombination rate density in the device. We find that efficient OLEDs are possible for a proper choice of organic materials and contact parameters.

Recent ubiquitous computing environments increasingly impact on our lives using the current technologies of sensor network and ubiquitous services. In this paper, we propose ubiquitous architectural framework for ubiquitous sleep aid service(UbiSAS) in the subset of ubiquitous computing for refreshing of human's sleep. And we examine technical feasibility. Human can recover his health through refreshing sleep from fatigue. Ubiquitous architectural framework for UbiSAS in digital home offers agreeable sleeping environment and improves recovery from fatigue. So we present new concept of ubiquitous architectural framework dissolving stress. Specially, we apply context to context-aware framework module. This context is transferred to context adaptive inference engine which has service invocation function in intelligent agent module. Ubiquitous architectural framework for UbiSAS using context adaptive rule inference engine without user intervention is technical issue. That is to say, we should take sleep comfortably during our sleeping. And sensed information during sleeping is changed to context-aware information. This presents significant information in context adaptive rule inference engine for UbiSAS. This information includes all sleeping state during sleeping in context-aware computing technique. So we propose more effective and most suitable ubiquitous architectural framework using context adaptive rule inference engine for refreshing sleep in this paper.

Recently, a concept of bid-rigging is issued in electronic auction. To prevent this attack, Abe-Suzuki proposed firstly receipt-free scheme based on bidding-booth. Chen-Lee-Kim pointed out that Abe-Suzuki's scheme only provides receipt-freeness for losing bidders. Also, they introduced a new receipt-free sealed bid auction scheme using the homomorphic encryption technique. The main participants of their scheme are Auctioneer, Auction Issuer, Bidder and Seller. Bid-rigging can happen by a seller in their scheme. We propose receipt-free sealed-bid auction scheme using a universal re-encryption mixnet. For our receipt-free sealed-bid auction, we use Pseudo ID of a bidder and universal re-encryption technique of Golle et al. Also, our scheme satisfies privacy, correctness, public verifiability, non-reputation, and receipt-freeness.

In this paper, an adaptive algorithm is proposed in streaming MPEG-4 contents with fluctuating resource amount such as throughput of network conditions. MPEG-4 is the international standard for audiovisual presentation which is composed of object based media streams. The proposed technique provides the media stream corresponding an object with multiple media streams with different qualities and bit rate in order to support object based scalability to the MPEG-4 content. In addition, making the object streams adaptable, a feasible stream set selected from the multiple streams for transmission with optimal quality in the form of the current status.

A blind-mode integer frequency offset estimation algorithm is proposed for an OFDM system. Imperfect integer frequency offset estimation causes ambiguity in the data sub-carrier position. Morelli's blind integer frequency offiet estimation algorithm exploits the likelihood function by comparing the power in sub-carriers. It, however, shows performance degradation when there is the fractional frequency offset. The proposed algorithm solves this by using interpolation in the frequency domain. In this algorithm, it is exploited that the effect of the frequency offset is shown as a shift of power spectrum. By calculating the covariance of over-sampled samples, most approximate samples to integer point are obtained. It enables integer frequency offset estimation less affected by fractional frequency offset.

This paper addresses the problem of protecting security policies in security mechanisms, such as the detection policy of an Intrusion Detection System. Unauthorized disclosure of such information might reveal the fundamental principles and methods for the protection of the whole network. In order to avoid this risk, we suggest two schemes for protecting security policies in Snort using the symmetric cryptosystem, Triple-DES.

An UHF () RFID tag antenna is optimized and designed using a genetic algorithm (GA). The tag antenna impedance should be matched to the conjugate of the impedance of the tag IC Chip. The chip impedance has real and capacitive imaginary parts due to the parasitic capacitance of the RFID chip. A GA linked with a commercially available antenna simulation program optimizes the UHF tag antenna to match a commercially available RFID chip. This method shows that any RFID antenna can be designed for any commercial RFID chip with any impedance.

An RFID patch antenna for metallic object has been designed. The effects of variation of distance between the tag antenna and ground of the antenna have been studied. Various dielectric constants, thickness, permittivity, width of transmission line and length of transmission line have been used to design the better tag antenna for metallic object.