Therefore, this study suggested a simple analysis method using the flexural strength ratio of the transfer girder-wall to analyze structures with pilotis efficiently and the accuracy and usefulness of the suggested simple analysis method was verified through the analysis of example structures. Conclusions derived from this study are as follows. From the result of the simple analysis using a practical 3 dimensional model design, where the strength of the upper wall was modified as the ratio of 1/10~1/11 and analyzed in case of the flexural strength ratio of transfer girder-wall of the simple analysis method and the upper wall was separated as 4 bays at least, the flexural moment and shear strength of transfer girder showed higher figure by 1.03 times to 1.11 times compared to the detailed analysis and the result was similar to that of the detailed analysis of limited factors. When it is analyzed using the suggested simple analysis method, the figures of section moment, central moment and maximum shear strength required for the design of transfer girder proved to be estimated as Fail-safe.
목차
Abstract 1. 서론 2. 기존 연구사례 고찰 및 연구방법 2.1 기존 연구사례 고찰 2.2 연구의 범위 및 방법 3. 전이보 구조 시스템의 단순해석법 3.1 기본 구조모델 3.2 기본 해석모델 3.3 해석결과 고찰 3.4 종합 고찰 4. 전이보 구조 시스템의 단순해석법 적용 및 검증 4.1 구조 해석모델 개요 4.2 단순해석법 적용 및 검증 4.3 단순해석법 검증 결과 5. 결론 참고문헌
키워드
전이보단순해석법휨 강성비Transfer girderSimplified AnalysisFlexural strength ratio
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회지회연합회 학술발표대회논문집
간기
부정기
수록기간
2005~2013
십진분류
KDC 540DDC 690
이 권호 내 다른 논문 / 대한건축학회지회연합회 학술발표대회논문집 제1권 제1호 통권 제1집