Earticle

현재 위치 Home

FRP-강판 복합플레이트로 보강된 RC 보의 휨거동에 관한 실험적 연구
Experimental Study on the Flexural Behavior of RC Beams Strengthened with FRP-Steel Composite Plates

첫 페이지 보기
  • 발행기관
    대한건축학회지회연합회 바로가기
  • 간행물
    대한건축학회연합논문집 KCI 등재후보 바로가기
  • 통권
    제9권 제3호 통권 31호 (2007.09)바로가기
  • 페이지
    pp.193-200
  • 저자
    안상호
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A54064

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The flexural behavior of reinforced concrete beams strengthened with FRP-steel composite plate is presented. In this method, FRP-steel composite plate, reinforced with a combination of fibers(carbon or glass) and steel plate, are bonded to the concrete substrate and fastened with anchor bolts. The experimental work included flexural testing of 2.4m-long concrete beams with bonded and anchored composite plate. The strengthened RC beams were designed to fail in a ductile manner. The thin steel plate in FRP-steel composite plate makes usage of the anchoring system possible, which could delay or prevent the premature debonding failure. Two reference beams and 21 strengthened beams with CSP(Carbon fiber-steel composite plate) and 12 strengthened beams with GSP(Glass fiber-steel composite plate) were tested.
The structural behaviors of strengthened beams are compared with codes in terms of yield load and ultimate load, flexural stiffness. 33 beams were tested experimentally to evaluate the strength enhancement provided by the composite plate.
In the test results presented in this paper, the strengthened beams showed increases in yield and ultimate loads of up to 29~70% and 33~115%, respectively over an unstrengthened beam. All strengthened beams failed, as intended, in a ductile manner with the ultimate failure mode due to fiber tension failure in composite plate at large deflection with the composite plate still firmly attached. According to the results, it is shown that beams strengthened with composite plate are structurally efficient.

목차

Abstract
 1. 서 론
 2. 실 험
  2.1 실험계획
  2.2 하중재하 및 실험방법
 3. 실험결과 및 고찰
  3.1 실험체의 파괴형태
  3.2 보강보의 하중-처짐 곡선
  3.3 보강보의 하중 및 휨강성
  3.4 보강보의 연성
 4. 결론
 참고문헌

키워드

FRP-강판복합플레이트 보강보 휨실험 정착장치FRP-Steel Composite Plate Strengthened Beam Flexural Testing Anchoring System

저자

  • 안상호 [ Ahn, Sang-Ho | 정회원, 신라대학교 건축학부 부교수, 공학박사 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
  • 설립연도
    2000
  • 분야
    공학>건축공학
  • 소개
    본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다. 목적을 달성하기 위하여 다음의 사업을 한다. 1. 지회회원의 입지향상과 친목도모 2. 건축에 관한 조사․연구지도 및 이에 관련된 사업 3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행 4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최 5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항 6. 국내외 관계 제 학회와의 교류 및 회의참석 7. 기타 본회 목적달성에 필요한 사업

간행물

  • 간행물명
    대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
  • 간기
    격월간
  • pISSN
    1229-5752
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 540 DDC 690

이 권호 내 다른 논문 / 대한건축학회연합논문집 제9권 제3호 통권 31호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장