Earticle

현재 위치 Home

<학술연구>

공연장 만석시 음향성능 평가 및 주관적 반응 분석
Acoustic Performance Evaluation and Subjective Response Analysis at Fully Occupied Performance Hall

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제28권 제3호 (2026.06)바로가기
  • 페이지
    pp.418-424
  • 저자
    김재호, 문고리, 윤지성, 김건우, 김재수
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A487221

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Acoustic parameter has been a key indicator for an acoustic design and sound quality evaluation for the hall. However, a psychological feedback from audience provides more direct impression of what audience listen. Therefore, those two indicators were evaluated and compared to provide the best available acoustic output. Traditional acoustic parameter was measured through a sound measurement system, giving out 1.73 sec for reverberation time, 1.82 sec for early decay time, -0.50dB for clarity and 34% for definition. The psychological analysis was based on feedback from 434 audience for an exhibition performance. Audience rated eight categories related to the architecture acoustic, including reverberance, intimacy, loudness, intelligibility, clarity, warmth, balance and envelopment. Audience provided positive feedback with above 5 out of 7. There was no significant difference by gender and in each age groups, audience in their thirties replied with lower score. 2nd floor has an equivalent or higher rate than the 1st floor, which indicates that sound was distributed evenly in the entire hall.

목차

Abstract
1. 서론
2. 대상 공연장의 제원 및 측정 설명
2.1 공연장 제원
2.2 음향성능 측정 구성
3. 공연장의 음향 환경 분석
3.1 잔향시간 (RT, Reverberation Time)
3.2 초기감쇠시간 (EDT, Early Decay Time)
3.3 음악명료도 (C80, Clarity)
3.4 음성명료도 (D50, Definition)
3.5 소결
4. 청중의 답변을 통한 반응 분석
4.1 청감실험 분석 개요
4.2 음의 울림 (Reverberance)
4.3 음의 친밀감 (Intimacy)
4.4 음의 크기 (Loudness)
4.5 음악명료도 (Intelligibility)
4.6 음의 선명함 (Clarity)
4.7 음의 포근함 (Warmth)
4.8 음의 균형 (Balance)
4.9 음의 확산감 (Envelopment)
5. 결론
References

저자

  • 김재호 [ Jae-ho Kim | Wonkwang University Integrated M.S & Ph.D Course ]
  • 문고리 [ Ko-ri Moon | Professor, Dept. of Architecture, Donggang University ]
  • 윤지성 [ Ji-sung Yoon | Wonkwang University Ph.D Course ]
  • 김건우 [ Gun-woo Kim | Wonkwang University Integrated M.S & Ph.D Course ]
  • 김재수 [ Jae-soo Kim | Professor, Dept. of Architectural Engineering, Wonkwang University ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제28권 제3호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장