The purpose of the study is to increase the patient's convenience during imaging by taking these disadvantages into consideration while allowing the patient to maintain the correct posture for imaging, and to diagnose intercondylar fossa using the Bécleree method, Camp-Coventry method, and Holmblad method. We developed and produced a novel axillary for acquiring diagnostic radiography. The axillary device was manufactured to allow for detailed length adjustment by setting the horizontal length to a minimum of 25 cm and a maximum of 35 cm to cover the various leg lengths of patients. In consideration of various intercondyar fossa images, the maximum length of the horizontal part, which is the bottom of the lower floor, was set to 58 cm, and a part that could slide left and right was attached to the other side of the vertical part to enable angle adjustment. Although a human lower limb phantom was used, length and angle adjustments were conveniently possible for the patient. It will be much more convenient to set the length and angle of the assistive device and set the imaging posture according to each patient's leg length, which will be of great benefit to patients and radiogica technologists.
한국어
연구의 목적은 융기사이오목 엑스선 검사에서 환자의 편의를 증대시키면서 환자가 정확한 촬영 자세를 유지할 수 있도록 하여 융기사이오목의 진단을 위해 Béclere법, Camp-Coventry법, Holmblad법을 이용하여 진단적 가치가 높은 영상을 획득하는 새로운 보조를 개발하여 제작하였다. 보조기구는 환자들의 다양한 다리 길이를 커버하기 위해 가로 길이 최소 25 cm 최대 35 cm로 설정하여 세부적인 길이 조절이 가능하도록 제작하였다. 다양한 융기사이오목 촬영을 진행을 고려하여 아래 바닥이 되는 가로 부분의 최대 길이 58 cm가 되게 하여 각도 조절이 가능하도록 세로 부분 중 다른 한쪽에 좌우로 슬라이드를 할 수 있는 부분을 부착하였다. 인체 하지 팬텀을 이용하였으나 환자를 대상으로 길이 조절과 각도 조절이 편리하게 가능하다면, 환자 개개인의 다리 길이에 맞추어 보조기구의 길이와 각도를 설정하고 촬영 자세를 잡는 것이 훨씬 편리해지면서 환자와 방사선사에게 많은 이점을 줄 수 있다.
목차
Abstract Ⅰ. 서론 Ⅱ. 재료 및 방법 1. 보조기구 설계 및 제작 2. 기기 및 재료 3. 검사 방법 Ⅲ. 결과 Ⅳ. 고찰 Ⅴ. 결론 Ⅵ. 참고문헌 요약