The purpose of this study was to design and manufacture an adapter that can replace the saline syringe with a disposable syringe in an MRI automatic injector and to investigate its usefulness . The adapter was made of ABS-like material through 3D printing, and its efficiency was measured through durability testing and measurement of work preparation time. As a result , the adapter showed the possibility of stable operation through 100 durability tests (p>.001), and showed usefulness by reducing the test preparation time by an average of 283.5 seconds compared to using a syringe (p<.001). In conclusion, using this adapter can increase work efficiency while promoting patient safety.
한국어
본 연구의 목적은 MRI 자동인젝터에서 생리식염수용 실린지를 일회용 주사기로 대체할 수 있는어댑터를 구상 및 제작하고 그 유용성에 대하여 알아보고자 하였다. 어댑터는 3D 프린팅을 통해 ABS-like 재질로 제작되었으며, 내구성 시험과 업무 준비 시간 측정을 통해 효율성을 측정하였다. 결과적으로 어댑터는 100회의 내구성 시험을 통해 안정적 운용 가능성을 나타냈고(p>.001), 실린지 사용 대비 검사 준비 시간이 평균 283.5초 감소하는(p<.001) 유용성을 나타냈 다. 결론적으로 본 어댑터를 사용하면 환자 안전을 도모하면서 업무의 효율성을 증가시킬 수 있다.
목차
Abstract Ⅰ. INTRODUCTION Ⅱ. MATERIAL AND METHODS 1. 연구재료 및 대상 2. 연구방법 Ⅲ. RESULT 1. 내구성 및 주입량의 변화 여부 2. 검사 준비 소요시간 비교 Ⅳ. DISCUSSION Ⅴ. REFERENCE 요약
키워드
MRIAuto InjectorAdapterMRIAuto InjectorAdapter
저자
Woo-Jin Jeon [ 전우진 | Department of Radiology, National Police Hostpital ]
Taek-Sang Cho [ 조택상 | Department of Radiology, National Police Hostpital ]
Jae-Kyo Jeong [ 정재교 | Department of Radiology, National Police Hostpital ]
Wook-Bin Lim [ 임욱빈 | Department of Radiology, National Police Hostpital ]
In-Ju Kim [ 김인주 | Department of Radiology, National Police Hostpital ]
Jong-Min Seok [ 석종민 | Department of Radiology, National Police Hostpital ]
Corresponding Author