Earticle

현재 위치 Home

마산 현동 유적 출토 철부산물의 금속학적 분석과 제련·정련 공정 해석
Metallurgical Analysis of Iron-production Residues from the Hyeondong Site in Masan: Interpretation of Ancient Smelting and Refining Processes

첫 페이지 보기
  • 발행기관
    한국전통문화대학교 한국전통문화연구소 바로가기
  • 간행물
    한국전통문화연구 KCI 등재 바로가기
  • 통권
    제35권 (2025.05)바로가기
  • 페이지
    pp.215-249
  • 저자
    설송이, 김수기
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A475558

※ 기관로그인 시 무료 이용이 가능합니다.

7,800원

원문정보

초록

영어
This study inVestigates the metallurgical characteristics of iron-production by-products—slag, bloomery iron, and sponge iron—as well as iron billets (cheoljeong) excaVated from the Hyeondong site in Masan, South Gyeongsang ProVince. Using SEM-EDS analysis, it aims to elucidate the technological features of ancient smelting and refining processes and to reconstruct the production procedures of iron artifacts. The analysis reVealed no significant compositional differences between bloomery iron and sponge iron, suggesting that impurity separation was effectiVely achieVed during the smelting stage. Microstructural obserVations of the iron billets indicate possible carbon adjustment and heat treatment, while no eVidence of artificial flux additiVes was found. Trilinear coordinate analysis of oxide components reVealed two compositional clusters, with samples from the same context occasionally belonging to different groups, implying Varied manufacturing methods eVen within a single feature. Most iron billets were included in a single cluster and shared similar compositions, indicating a continuous smelting–refining process from slag to finished iron products. This study clarifies the technological relationships among iron by-products and billets from the Hyeondong site and proVides a foundation for future comparatiVe studies on regional ironworking practices.
한국어
본 연구는 경상남도 창원시 마산 현동 유적에서 출토된 제철 부산물(철재, 철 괴)과 철정을 대상으로, 유물 간 기술적 관계성과 제철·정련 공정을 규명하고자 하였다. 철재는 슬래그(slag), 철괴는 환원철(괴련철·해면철)을 통칭한 것으로, 제철 유구는 확인되지 않았으나 유물 분석을 통해 철기 제작의 기술적 정황을 추 정하였다. 비록 제련로 등 직접적인 구조 유구는 확인되지 않았지만, 유물의 조성 및 출토 맥락을 통해 일정 수준의 철기 생산 또는 가공 활동이 이루어졌을 가능 성이 제기된다. SEM-EDS 및 금속조직 분석 결과, 철괴는 성분 차이가 미미해 동일 공정의 산물로 해석되며, 철정에서는 페라이트, 펄라이트, Widmannstätten 조직이 관 찰되어 탄소 조정 및 열처리 가능성이 확인되었다. 성분 분석 결과 두 개의 군집 이 형성되었고, 철정은 대부분 특정 군집에 포함되어 철재–철괴–철정으로 이어지 는 공정 체계를 시사한다. 본 연구는 마산 현동 유적 철기 제작 기술의 실체를 금 속학적으로 해석한 사례로, 향후 지역 간 비교 및 기술 복원 연구의 기초자료가 될 수 있다.

목차

국문초록
I. 서론
II. 연구 대상 및 방법
1. 연구 대상
2. 연구 방법
III. 연구 결과
1. 철재
2. 철괴1
3. 철괴2
4. 철정
5. 미세조직 및 조업 온도 종합 분석
IV. 고찰
1. 이변량 비교 분석 그래프
2. 삼각좌표 분석 그래프
V. 결론
참고문헌
Abstract

저자

  • 설송이 [ Seol, songie | 한국전통문화대학교 디지털헤리티지학과, 박사과정 ]
  • 김수기 [ Kim, Sugi | 전)용인대학교 문화재보존학과교수 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국전통문화대학교 한국전통문화연구소 [The Korea National University of Cultural Heritage]
  • 설립연도
    2003
  • 분야
    인문학>역사학
  • 소개
    - 한국전통문화대학교 전통문화분야 연구지원 - 전통문화 및 문화유산 각 분야에 대한 연구 - 학술연구용역 등 비영리 사업 수행

간행물

  • 간행물명
    한국전통문화연구 [The Journal of Cultural Heritage]
  • 간기
    반년간
  • pISSN
    1598-9097
  • 수록기간
    2003~2025
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 911 DDC 951

이 권호 내 다른 논문 / 한국전통문화연구 제35권

    피인용수 : 0건 (자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장