2019 International Symposium of Institute of Forest Science (2019.09)바로가기
페이지
pp.139-139
저자
Shujun Han, Jinshun Lu, Dan Liu, Huageng Sun, Ying Liu, Lin Dai, Chuanling Si
언어
영어(ENG)
URL
https://www.earticle.net/Article/A450378
원문정보
초록
영어
Enhancing the high-value utilization of waste plant extract residues in pulp and paper industry is a challenge. Here, the extraction residue of ginseng was firstly obtained through four processes: extraction, concentration, removal of residual drugs and spray drying, as illustrated in Figure 1. Subsequently, this ginseng extract residue blended wood pulp (bleached eucalyptus kraft pulp) as raw material, which was applied in pulp and paper industry to study the paper-making mechanism and properties of business card base paper. Forming morphology, structures and strength of the prepared paper were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), thermal weight analysis (TGA), scanning electron microscope (SEM), paper physical performance tests. The results showed that the paper retained the basic chemical structure of cellulose. Compared with pure wood pulp paper, the paper not only can ensure its physical strength performance, but also display product characteristics in business and interpersonal communication, and it plays the media function of information exchange. Therefore, the above methods are of great significance in reducing environmental pollution, saving forestry resources, developing new products and creating economic value. It is also expected to realize the characteristic application of pulp and paper and natural product extraction industry.
저자
Shujun Han [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Jinshun Lu [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Dan Liu [ Tianjin Jianfeng Natural Product R&D Co., Ltd., Tianjin 300457, China ]
Huageng Sun [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Ying Liu [ Tianjin Jianfeng Natural Product R&D Co., Ltd., Tianjin 300457, China ]
Lin Dai [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Corresponding Author
Chuanling Si [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China; Tianjin Jianfeng Natural Product R&D Co., Ltd., Tianjin 300457, China ]
Corresponding Author