Kinetic study of furfural production from Eucalyptus sawdust using H-SAPO-34 as solid brønsted acid and lewis acid catalysts in biomass-derived solvents
2019 International Symposium of Institute of Forest Science (2019.09)바로가기
페이지
pp.138-138
저자
Min Liang, Rui Xu, Jiaxin Yang, Lijie Jiang, Xiaoyun Li, Chuanling Si
언어
영어(ENG)
URL
https://www.earticle.net/Article/A450377
원문정보
초록
영어
The production of platform chemicals from lignocellulosic biomass is scientifically valuable but technologically challenging. With the aim to establish a green reaction system for the production of furfural from lignocellulosic biomass, in the current work, H-SAPO-34 was investigated for catalysis of the conversion of Eucalyptus sawdust to furfural in γ-valerolactone (GVL). H-SAPO-34 was prepared and characterized by XRD, SEM, FTIR, BET, TGA and ammonia adsorbed FTIR. H-SAPO-34 possesses Brønsted and Lewis acid sites and a large specific surface area. The average pore diameter of H-SAPO-34 was 0.86nm, which is beneficial for the spread of xylose and furfural and the inhibition of humin production. In this work, a peak furfural yield of 99.28% from Eucalyptus was achieved at 210 °C in 120 min with 30g/L H-SAPO-34. The Brønsted/Lewis acid bifunctionality and the solvent effect of γ -valerolactone possibly contributed to the high furfural yield from real biomass. The kinetics of the conversion of Eucalyptus sawdust to furfural was also studied, and the activation energy for furfural pro-duction was calculated. Additionally, the catalytic activity and stability of the regenerated catalyst were esti-mated.
Min Liang [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Rui Xu [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Jiaxin Yang [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Lijie Jiang [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Xiaoyun Li [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China; Tianjin Key Laboratory of Marine Resources and Chemistry, Tianjin University of Science & Technology, Tianjin 300457, China ]
Corresponding author
Chuanling Si [ Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China ]
Corresponding Author