Earticle

현재 위치 Home

Research Article

경도 조절이 가능한 토기 복원용 에폭시의 제조 및 특성
Manufacturing and Characteristics of Hardness Controllable Epoxy for Restoration of Earthenware

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제39권 제4호 (2023.12)바로가기
  • 페이지
    pp.631-639
  • 저자
    박민선, 위광철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A442537

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Fatty acids, tall-oil, reaction products with tetraethylenepentamine and 1-(2-aminoethyl) piperazine-based epoxy resin were mixed to manufacture 2 types of hardener to enable hardness control for restoration of earthenware. The mixed epoxy resin was manufactured in 2-solution reaction hardening type to control the hardness in the range of approximately 40∼65 Hs, and tensile strength in the range of 27∼121 kgf/mm2 and hardening type of 20∼30 min were secured. Moreover, it has wear rate that has been enhanced by 2 folds compared to the existing restoration material, which can be controlled in accordance with the mixing ratio, and was manufactured to enable mixing of diversified fillers later on. These results indicate that this is a restoration material that can solve the problems pointed out for the earthenware restoration materials such as processability and workability that occurred due to high level of hardness, tensile force and adhesion strength, etc., and increase in the level of fatigue due to tension with earthenware surface, etc. Accordingly, it is deemed that it is a material that can be used in actual restoration.
한국어
토기 복원을 위한 경도 조절이 가능하도록 Fatty acids, tall-oil, reaction products with tetraethylenepentamine와 1-(2-Aminoethyl)piperazine를 기반으로 한 에폭시 수지를 혼합하여 2 종 의 경화제를 제조하였다. 혼합된 에폭시 수지는 2액 반응 경화형으로 제조되어 약 40∼65 Hs 내외에서 경도를 조절할 수 있었으며, 27∼121 kgf/mm2의 인장강도와 20∼30 min의 경화시간 을 확보하였다. 또한 기존의 복원 재료보다 2 배 증진된 마모율과 이를 배합 비율에 따라 조정 할 수 있으며, 향후 다양한 충전제가 혼합 가능하도록 제조하였다. 이러한 결과는 토기 복원 재료의 문제점으로 지적되었던 강한 경도와 인장성, 접착력 등으로 인해 발생했던 가공성, 작업 성, 경화 후 토기 표면과의 장력으로 인한 피로도 증가 등을 해결할 수 있는 복원 재료를 제시하 고 실제 복원에 사용될 수 있는 재료로 판단된다.

목차

초록
ABSTRACT
1. 서론
2. 재료 및 방법
2.1. 연구재료
2.2. 연구방법
3. 결과 및 고찰
3.1. 에폭시 혼합 결과
3.2. 물성 실험 결과
4. 결론
REFERENCES

키워드

토기 보존처리 토기 복원 복원 재료 혼합수지 메움재 Preservation treatment of earthenware Earthenware restoration Restoration material Mixed resin Filler

저자

  • 박민선 [ Min-Seon Park | 국립광주박물관 보존과학실 ]
  • 위광철 [ Koang-Chul Wi | 한서대학교 문화재보존학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제39권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장