Earticle

현재 위치 Home

Pressure drop characteristics of concentric spiral corrugation cryostats for a HTS power cable considering core surface roughness

첫 페이지 보기
  • 발행기관
    한국초전도저온학회 (구 한국초전도저온공학회) 바로가기
  • 간행물
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) KCI 등재 SCOPUS 바로가기
  • 통권
    Vol.25 No.2 (2023.06)바로가기
  • 페이지
    pp.19-24
  • 저자
    Youngjun Choi, Seokho Kim
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A440550

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Recently, interest in renewable energy such as solar and wind power has increased as an alternative to fossil fuels. Renewable energy sources such as large wind farms require long-distance power transmission because they are located inland or offshore, far from the city where power is required. High-Temperature Superconducting (HTS) power cables have more than 5 times the transmission capacity and less than one-tenth the transmission loss compared to the existing cables of the same size, enabling largecapacity transmission at low voltage. For commercialization of HTS power cables, unmanned operation and long-distance cooling technology of several kilometers is essential, and pressure drop characteristic is important. The cryostat's spiral corrugation tube is easier to bend, but unlike the round tube, the pressure drop cannot be calculated using the Moody chart. In addition, it is more difficult to predict the pressure drop characteristics due to the irregular surface roughness of the binder wound around the cable core. In this paper, a CFD model of a spiral corrugation tube with a core was designed by referring to the water experiments from previous studies. In the four cases geometry, when the surface roughness of the core was 10mm, most errors were 15% and the maximum errors were 23%. These results will be used as a reference for the design of long-distance HTS power cables.

목차

Abstract
1. INTRODUCTION
2. High Temperature Superconducting power cable
2.1. Structure of HTS power cable
2.2. Spiral corrugation cryostat and core protection layer
2.3. HTS power cable operating limit condition
2.4. Pressure drop of HTS power cable
3. CFD simulation of HTS power cable
3.1. Flow passage on HTS power cable
3.2. Boundary condition and mesh independency test
3.3. Friction factor according to surface roughness of cable core
3.4. Comparison with previous experimental results.
4. Conclusion
ACKNOWLEDGMENT
REFERENCES

키워드

CFD corrugation tube HTS power cable pressure drop

저자

  • Youngjun Choi [ Changwon National University, Changwon, Korea ]
  • Seokho Kim [ Changwon National University, Changwon, Korea ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국초전도저온학회 (구 한국초전도저온공학회) [The Korean Society of Superconductivity and Cryogenics (KSSC)]
  • 설립연도
    1998
  • 분야
    공학>전기공학
  • 소개
    21세기 핵심기술인 초전도공학과 저온공학분야의 기술 수준을 향상시키고, 선진 외국의 관련 학회와의 국제 교류 뿐만 아니라 이 분야에서 산.학.연의 학술활동 및 기술교류의 구심점으로의 그 역할을 성실히 수행하고자 한다.

간행물

  • 간행물명
    한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]
  • 간기
    계간
  • pISSN
    1229-3008
  • eISSN
    2287-6251
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재,SCOPUS
  • 십진분류
    KDC 427 DDC 537

이 권호 내 다른 논문 / 한국초전도·저온논문지 (구 한국초전도저온공학회논문지) Vol.25 No.2

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장