Earticle

현재 위치 Home

기술 융합(TC)

드론을 이용한 다시점 투영 이미지 제작 연구
A Study on the Production of Perspective Images using Drone

첫 페이지 보기
  • 발행기관
    국제문화기술진흥원 바로가기
  • 간행물
    The Journal of the Convergence on Culture Technology (JCCT) KCI 등재 바로가기
  • 통권
    Vol.8 No.6 (2022.11)바로가기
  • 페이지
    pp.953-958
  • 저자
    최기창, 권순철, 이승현
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A421251

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
Holographic Stereogram can provide the depth perception without the visual fatigue and dizziness because it use multiple images acquired from the multiple viewpoints. In order to produce a holographic stereogram, it is necessary to obtain perspective images of a live object and record it on film using a digital hologram printer. when acquiring perspective images, the hologram without distortion can be produced only when the perspective images with a constant distance between the camera and the target is obtained. If the target is small, it is possible to keep the constant distance from the camera to object. but if it is large, this is difficult to keep the constant distance. In this study, we photograph the large object using the POI (Point of Interest) function which is one of the smart flight modes of drone to produce perspective images required for the hologram production. after that, problems such as the unexpected shakings and distance change between camera and object is corrected in post production. as a result, we produce the perspective images.
한국어
홀로그래픽 스테레오그램은 여러 시점에서 취득한 다수의 이미지를 사용하므로 입체피로나 어지러움 없는 입 체감을 제공한다. 홀로그래픽 스테레오그램을 제작하기 위해서는 실사 물체의 다시점 투영 이미지를 획득한 후 디지 털 홀로그램 프린터를 이용해 필름에 기록하는 과정을 거쳐야 한다. 다시점 투영 이미지(Perspective Images)를 획 득할 때, 대상 물체와 카메라 사이의 거리가 일정해야 왜곡 없는 홀로그램을 제작할 수 있다. 대상 물체가 소형이면 카메라와의 거리를 일정하게 유지하는 것이 가능하지만, 대형인 경우에는 물체와 카메라와의 일정 거리 유지가 어렵 다. 본 논문에서는 대형 물체의 홀로그램 제작에 필요한 다시점 투영 이미지를 획득하기 위해, 드론을 이용하여 스마 트 비행 모드인 POI(Point of Interest)방법으로 촬영하였다. 이후, 예기치 못한 흔들림이나 대상 물체와의 거리가 일 정하지 못한 부분은 후반에서의 작업을 통해 문제점을 보정하는 단계를 거쳐 대형 물체의 다시점 투영 이미지를 제 작하였다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 이론적 배경
1. 다시점 투영 이미지
2. 드론
Ⅲ. 실험환경 및 방법
1. 실험 환경
2. 촬영
3. 후반 작업
Ⅳ. 실험 결과
Ⅴ. 고찰
References

키워드

홀로그래픽 스테레오그램 디지털 홀로그램 프린터 다시점 투영 이미지 드론 POI Holographic Stereogram Digital Hologram Printer Perspective Image Drone POI

저자

  • 최기창 [ Ki-chang Choi | 정회원, 광운대학교 일반대학원 실감융합콘텐츠학과 ] 제1저자
  • 권순철 [ Soon-chul Kwon | 정회원, 광운대학교 스마트융합대학원 교수 ] 참여저자
  • 이승현 [ Seung-hyun Lee | 정회원, 광운대학교 인제니움학부 교수 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제문화기술진흥원 [The International Promotion Agency of Culture Technology]
  • 설립연도
    2009
  • 분야
    공학>공학일반
  • 소개
    본 진흥원은 문화기술(Culture Technology) 관련 산·학·연·관으로 구성된 비영리 단체이다. 문화기술(CT)은 정보통신기술(ICT), 문화적 사고 기반의 예술, 인문학, 디자인, 사회과학기술이 접목된 신융합기술(New Convergence Technology, NCT)로 정의한다. 인간의 삶의 질을 향상시키고, 진보된 방향으로 변화시키고, 문화기술 관련 분야의 학술 및 기술의 발전과 진흥에 공헌하기 위하여, 제3조의 필요한 사업을 행함을 그 목적으로 한다.

간행물

  • 간행물명
    The Journal of the Convergence on Culture Technology (JCCT) [문화기술의 융합]
  • 간기
    격월간
  • pISSN
    2384-0358
  • eISSN
    2384-0366
  • 수록기간
    2015~2025
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 600 DDC 700

이 권호 내 다른 논문 / The Journal of the Convergence on Culture Technology (JCCT) Vol.8 No.6

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장