Earticle

현재 위치 Home

Research Article

사천왕사지 출토 수파형전 유리질층의 원료 특성과 제작기법 연구
A Study on The Characteristics of The Raw Materials and The Manufacturing Techniques for Glassy Layers on The Wave-shaped Tiles Excavated from The Sacheonwangsa Temple Site

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제38권 제5호 (2022.10)바로가기
  • 페이지
    pp.496-508
  • 저자
    김세희, 김동하
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A419258

※ 기관로그인 시 무료 이용이 가능합니다.

4,500원

원문정보

초록

영어
In this study, the material characteristics of glassy layers on the wave-shaped tiles excavated from the Sacheonwangsa Temple Site were identified, and the manufacturing techniques and their characteristics were examined. The samples were ten green glassy layers separated from tiles. These samples were 2.62 to 4.43 mm thick and were sorted light and dark green. As a result of quantitative analysis of green glassy layers, PbO was calculated from 73.0 to 78.9 wt.% (average 76.7 wt.%), SiO2 was calculated from 21.2 to 27.0 wt.% (average 23.3 wt.%). Therefore, it is presumed that high-lead glassy layers were made with high-purity silica stone and lead. In addition, as a result of comparing the correlation between lead isotope ratios and trace and rare earth elements in the glassy layers, it was confirmed that they were largely divided into two groups. It is presumed that it was manufactured by fixing the wave-shaped tiles that had completed firing to a frame, putting a molten glassy onto it, and cooling it. Based on these morphological and material characteristics, it is closer to the glass than the glaze.
한국어
본 연구에서는 사천왕사지에서 출토된 수파형전의 유리질층에 대하여 재료과학적 특성을 파악하고 제작기법과 성격을 규명하였다. 분석 대상은 수파형전에서 분리한 녹색의 유리질층 10점으 로, 두께는 2.62∼4.43 mm이고 색상은 옅은 녹색과 짙은 녹색으로 구분된다. 분석 결과, 대상 유물은 주요 성분 함량이 PbO 73.0∼78.9 wt.%(평균 76.7 wt.%), SiO2 21.1∼27.0 wt.%(평균 23.3 wt.%)로, 순도가 높은 규석과 납 원료로 제작한 고연(高鉛)의 유리질층으로 판단된다. 그리고 납동위원소비와 미량 및 희토류 원소 분석 결과에서 원료 특성이 크게 두 그룹으로 구분되는 것으로 나타났다. 제작 기법은 소성을 완료한 수파형전을 틀에 고정한 후 그 위에 유리질의 융액을 붓고 식혀서 만들었을 것으로 추정된다. 따라서 사천왕사지 출토 수파형전의 유리질층은 형태적⋅재료적 특성으로 보아 유약보다는 유리에 가까운 것으로 이해할 수 있다.

목차

초록
ABSTRACT
1. 서론
2. 연구 대상
2.1. 수파형전의 발굴 현황
2.2. 수파형전의 형태적 특징
2.3. 연구 시료
3. 연구 방법
4. 연구 결과
4.1. 현미경 관찰
4.2. 색도 측정
4.3. 성분 분석
4.4. 납동위원소비
5. 고찰
5.1. 원료 특성
5.2. 수파형전의 제작기법
6. 결론
REFERENCES

키워드

사천왕사지 수파형전 유리질층 납유리 정량분석 납동위원소분석 Sacheonwangsa Temple Site Wave-shaped tiles Glassy layers Lead glass Quantitative analysis Lead isotope analysis

저자

  • 김세희 [ Sehee Kim | 국립경주문화재연구소 ] Corresponding author
  • 김동하 [ Dongha Kim | 국립경주문화재연구소 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제38권 제5호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장