The turnout system of the sleeper floating tracks (STEDEF) on urban transit is a Anti-vibration track composed of a wooden sleeper embedded in a concrete bed and a sleeper resilience pad under the sleeper. Therefore, deterioration and changes in spring stiffness of the sleeper resilience pad could be cause changes in sleeper support conditions. The damage amount of manganese crossings that occurred during the current service period of about 21 years was investigated to be about 17% of the total amount of crossings, and it was analyzed that the damage amount increased after 15 years of use (accumulated passing tonnage of about 550 million tons). In this study, parameter analysis (wheel position, sleeper support condition, and dynamic wheel load) was performed using a three-dimensional numerical model that simulated real manganese crossing and wheel profile, to analyze the damage type and cause of manganese crossing that occurred in the actual field. As a result of this study, when the voided sleeper occurred in the sleeper around the nose, the stress generated in the crossing nose exceeded the yield strength according to the dynamic wheel load considering the design track impact factor. In addition, the analysis results were evaluated to be in good agreement with the location of damage that occurred in the actual field. Therefore, in order to minimize the damage of the manganese crossing, it is necessary to keep the sleeper support condition around the nose part constant. In addition, by considering the uniformity of the boundary conditions under the sleepers, it was analyzed that it would be advantageous to to replace the sleeper resilience pad together when replacing the damaged manganese crossing.
한국어
도시철도 침목플로팅궤도(STEDEF)의 분기기는 콘크리트 도상에 매입된 목침목과 침목 하부의 침목방진패드 로 구성된 방진궤도로서 침목방진패드의 열화 및 이에 따른 스프링강성의 변화가 침목지지조건의 변화를 초래할 수 있다. 현재 약 21년의 공용기간 동안 발생된 망간크로싱의 손상수량은 전체 부설수량 대비 약 17%로 조사되었으며, 사용 기간 15년 이후(누적통과톤수 약 5.5억톤)부터 손상 물량이 증가하는 것으로 분석되었다. 본 연구에서는 실물 망간크로싱과 차륜의 형상을 모사한 3차원 수치모델을 이용한 매개변수 해석(차륜의 위치, 침목지지조건 및 동적 윤 중의 크기)을 수행하여 실제 현장에서 발생된 망간크로싱의 손상유형 및 발생원인을 분석하였다. 연구결과, 노즈부 주 변 침목에 뜬침목이 발생된 경우, 설계 궤도충격계수가 적용된 동적윤중 작용 시 노즈부 단면의 발생응력이 항복강도 를 초과하였으며, 이는 실제 현장에서 발생된 손상위치와 비교적 잘 일치하는 것으로 분석되었다. 따라서 망간크로싱 의 손상을 최소화하기 위해서는 노즈부 주변의 침목지지조건을 일정한 수준으로 유지하고, 손상된 망간크로싱 교체 시에는 침목 하부 경계조건의 균일성 확보를 위해 침목방진패드를 함께 교체하는 것이 바람직할 것으로 분석되었다.
목차
요약 Abstract Ⅰ. 서론 Ⅱ. 망간크로싱의 손상현황 및 요인 분석 Ⅲ. 수치해석 1. 해석조건 2. 손상해석 결과 Ⅳ. 분석 및 고찰 1. 손상유형 분석결과 2. 망간크로싱 손상에 미치는 매개변수 분석결과 Ⅴ. 결론 References
키워드
도시철도침목플로팅궤도망간크로싱손상수치해석Urban TransitSleeper Floating TrackManganese CrossingsDamageFinite Element Analysis
국제문화기술진흥원 [The International Promotion Agency of Culture Technology]
설립연도
2009
분야
공학>공학일반
소개
본 진흥원은 문화기술(Culture Technology) 관련 산·학·연·관으로 구성된 비영리 단체이다. 문화기술(CT)은 정보통신기술(ICT), 문화적 사고 기반의 예술, 인문학, 디자인, 사회과학기술이 접목된 신융합기술(New Convergence Technology, NCT)로 정의한다. 인간의 삶의 질을 향상시키고, 진보된 방향으로 변화시키고, 문화기술 관련 분야의 학술 및 기술의 발전과 진흥에 공헌하기 위하여, 제3조의 필요한 사업을 행함을 그 목적으로 한다.
간행물
간행물명
The Journal of the Convergence on Culture Technology (JCCT) [문화기술의 융합]
간기
격월간
pISSN
2384-0358
eISSN
2384-0366
수록기간
2015~2026
등재여부
KCI 등재
십진분류
KDC 600DDC 700
이 권호 내 다른 논문 / The Journal of the Convergence on Culture Technology (JCCT) Vol.8 No.5