Earticle

현재 위치 Home

융합 의과학

Analysis of Operation Areas for Automatically Tuning Burst Size-based Loss Differentiation Scheme Suitable for Transferring High Resolution Medical Data
고해상도 의학 데이터 전송에 적합한 자동 제어 버스트 크기 기반 손실 차등화 기법을 위한 동작 영역 분석

첫 페이지 보기
  • 발행기관
    한국디지털정책학회 바로가기
  • 간행물
    디지털융복합연구 KCI 등재 바로가기
  • 통권
    제20권 제4호 (2022.04)바로가기
  • 페이지
    pp.459-468
  • 저자
    Yonggyu Lee
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A411133

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In medical area, very high resolution images, which is loss sensitive data, are used. Therefore, the use of optical internet with high bandwidth and the transmission of high realiability is required. However, according to the nature of the Internet, various data use the same bandwidth and a new scheme is needed to differentiate effectively these data. In order to achieve the differentiation, optical delay line buffers are used. However, these buffers is constructed based on some optimal values such as the average offered load, measured data burst length, and basic delay unit. Once the buffers are installed, they are impossible to reinstall new buffers. So, the scheme changing burst length dynamically was considered. However, this method is highly unstable. Therefore, in this article, in order to guarantee the stable operation of the scheme, the analysis of operation conditions is performed. With the analysis together with the scheme, high resolution medical data with the higher class can transmit stably without loss.
한국어
의료 현장에서는 매우 고해상도의 이미지를 사용하고 있으며, 이는 손실에 매우 민감한 정보이다. 이에 따라 높은 대역폭뿐만 아니라 고신뢰성 전송을 제공할 수 있는 광 인터넷의 활용이 요구되고 있다. 그러나 인터넷의 특성상 다양한 종류의 데이터가 동일한 대역폭을 활용하게 되고, 이를 효과적으로 차별화할 수 있는 수단이 요구되고 있다. 이를 위해 광 지연 라인 버퍼가 많이 활용되고 있다. 그러나, 이러한 버퍼는 제공 부하, 측정된 데이터 버스트 크기, 기본 지연 유닛 등과 같은 최적값을 이용해 구성된다. 광 버퍼는 한 번 설정되면 변경할 수 없다. 그러므로 데이터 버스트 크기를 동적으로 변경시키는 방법이 활용되고 있다. 그러나 동적으로 버스트의 길이를 변화시키는 것은 상당한 불안정성을 내포하고 있다. 이에 본 논문에서는 안정적인 동작을 보장할 수 있는 동작 조건을 분석하고자 한다. 본 논문의 기법을 활용해 높은 우선순위의 고해상도 의료 데이터를 손실 없이 안정적으로 전송할 수 있다.

목차

Abstract
요약
1. Introduction
2. Buffering Architecture
3. Feasibility Analysis
3.1 Summarized Algorithm
3.2 Feasibility Conditions
4. Performance Evaluation
5. Conclusion
REFERENCES

키워드

광 인터넷 광 지연 라인 동작 조건 서비스 품질 OBS Optical Internet Fiber Delay Line Operation Conditions QoS OBS

저자

  • Yonggyu Lee [ 이용규 | independent researcher ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국디지털정책학회 [The Society of Digital Policy & Management]
  • 설립연도
    2003
  • 분야
    복합학>과학기술학
  • 소개
    디지털기술 및 산업정책, 디지털경제, 관련 산업의 연구, 전자정부, 디지털정치에 관한 제도적, 정책적 연구, 디지털경영, 전자상거래, e-비즈니스에 관한 실용적 연구, 학술연구지 발간 및 학술대회 개최 등을 통하여 디지털경제 및 디지털경영에 관련되는 국가정책 분야의 연구 및 교류를 촉진하고 국가 및 기업 정보화와 디지털산업의 발전에 공헌한다.

간행물

  • 간행물명
    디지털융복합연구 [Journal of Digital Convergence]
  • 간기
    계간
  • pISSN
    2713-6434
  • eISSN
    2713-6442
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재후보
  • 십진분류
    KDC 569 DDC 620

이 권호 내 다른 논문 / 디지털융복합연구 제20권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장