The seismic design according to the DBD(displacement based design) procedure is initiated by specifying a target displacement, while the elastic response acceleration is determined in the first instant to obtain the design force in the current FBD(force based design) procedure. The main difference in between FBD and DBD can be stated that the strength and stiffness are not the design parameters but the outcomes at the end in DBD procedure. The advantage of DBD over FBD is that it only requires the linear static analysis when formulating the design procedure but it can show the yield displacement, ultimate displacement, ductility and design yield moments. This study proposes a seismic design procedure for MDOF steel structure, utilizing this advantage of DBD. This study shows that the ultimate displacement of the structures can be estimated successfully by DBD procedure and target displacement and the story height are the only initial design parameters. It also reveals that drift ratio is the key parameter in DBD procedure affecting ductility, the yield displacement, damping and fundamental period for the structure.
목차
Abstract 1. 서론 2. DBD 설계의 절차 2.1 치환구조물법 2.2 변위기반설계법의 절차 3. 적용 설계 예 3.1 단 경간 2층 철골 구조물 3.2 3베이(bay) 5층 및 20층 철골 구조물 4. 설계 변수 고찰 4.1 층간변위 비 4.2 층고의 영향 4.3 설계 변위스펙트럼 강도의 영향 5. 비탄성 동적해석에 의한 DBD의 평가 6. 하중 기반설계(FBD)과의 비교 7. 결론 REFERENCES
키워드
변위기반설계내진 설계다자유도 구조물치환구조물법Displacement Based DesignSeismic DesignMulti-Degree-of-Freedom StructureSubstitute Structure Method
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]