Earticle

초록

영어

The steel pipe scaffolding, which is one of the most commonly used construction structures in construction sites, should be installed with a wale spacing of 1.5 m or less in accordance with the regulations on occupational safety and health standards, and the first wale should be installed 2.0 m or less from the ground. However, when considering the average height of adult men and women, if the vertical wale spacing is 1.5m and the work-plate is installed, the work height is limited to within 1.5m, which is very inefficient for work. If the vertical wale spacing is 3.0m and work-plate is installed, it exceeds the work height and range of the worker. Therefore, the ladder scaffold etc. must be installed on the work-plate, which leads to an increase in inefficient work and accident risk. In addition, most of the foreign country wale spacings are defined to be less than 2.0 m, and it is necessary to review the wale spacing considering the work environment of the worker in Korea. Therefore, in this study, the structure analysis according to the wale spacing was performed and structural safety was checked for proper wale spacing when considering the elongation of korean adult workers.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 연구범위 및 방법
 2. 관련 기준 조사 및 설문조사
  2.1 국내·외 강관비계 수직 띠장 간격 기준 비교
  2.2 국내 성인 남녀 평균 신장
  2.3 설문조사 실시
 3. 이론적 고찰
  3.1 2차 효과
  3.2 가새
  3.3 좌굴
 4. 구조해석
  4.1 해석 개요
  4.2 물성치 정의
  4.3 하중 및 하중조합
  4.4 모델링
 5. 구조 해석 검토
 6. 좌굴 계산 검토
 7. 결론
 REFERENCES

키워드

저자

• 이수현 [ Lee, Su-Hyeon | 경기대학교 대학원 건축공학과 석사과정 ]
• 최병정 [ Choi, Byong-Jeong | 경기대학교 플랜트·건축공학과 교수, 공학박사 ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]

• 간기

  격월간

• pISSN

  1229-5752

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 540 DDC 690