Earticle

초록

영어

In this study, indoor illuminance and daylight distribution compared to the generation performance of PV window system are experimented and analyzed in accordance with the types of silicon (crystalline, amorphous). According to the analysis of generation quantity during the measurement period, when solar radiation is 138.1kW, daily maximum generation quantity is 27.4kW (19.8% of efficiency) for crystalline PV window system, and 5.8kW (4.1% of efficiency) for amorphous PV window system. In addition, according to analysis of indoor illuminance and daylight distribution, the illuminance of 500lx is secured from all measuring points, and in the case of daylight factor, more than 1.5% of minimum standard (BS 8206-2) is indicated. Therefore, it is analyzed that the lighting performance required by residential environment is satisfied by crystalline as well as amorphous PV window system. However, in the case of illuminance uniformity, crystalline PV window system are analyzed to be 10.5% lower for the measuring height of 400mm and 48.6% lower for the measuring height of 850mm compared to the amorphous PV door and window system.

목차

Abstract
 1. Introduction
 2. Methodology
 3. Constitution of PV Window and Mock-up
  3.1. Constitution of Window
  3.2. Constitution of Mock-up
 4. Result of Analysis
  4.1. Solar Radiation and Generation Quantity
  4.2. Indoor Illuminance and Daylight Distribution
 5. Conclusion
 Acknowledgments
 References

키워드

저자

• Doo-Sung Choi [ Building Equipment & Fire Protection System, Chungwoon University, 22100 113 Sukgol-Ro, Nam-Gu, Incheon, Korea ]
• Jun-Ho An [ Architectural Engineering, Suwon University, 18323 17 Wauan-Gil, Bongdam-Eup, Hawaseong-Si, Gyeonggi, Korea ]
• Jin-Seok Do [ Architecture, Yeoju Institute of Technology, 12652 338 Sejong-Ro, Yeoju-Si, Gyeonggi, Korea ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Smart Home

• 간기

  격월간

• pISSN

  1975-4094

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605