Aiming at the grid-connected problems of the double-fed induction generator (DFIG), this paper researches the control technology of the rotor excitation and the pitch angle and proposes a grid-connected DFIG joint optimization control strategy of the rotor excitation and the pitch angle based on the structure decentralized theory, and establishes the joint optimization model of the grid-connected DFIG. On the basis of the model, the rotor excitation current adaptive terminal sliding mode controller and the pitch angle controller are designed. The simulation results show that the proposed control strategy can achieve an effective control of the DFIG’s power angle and the DFIG’s rotor flux and reduce the adverse effects of the power angle when the double-fed wind generator and synchronous generator (SG) are in parallel operation. The algorithm given by this article not only improves the system's ability to resist external disturbances, but also enhances the transient stability of the power system. It has important actual significance and practical application value.
목차
Abstract 1. Introduction 2. The Interaction Mechanism Analysis Of The DFIG And The Grid 2.1 The Effect of Dynamic Characteristics of the Power Angle on the Grid 2.2 Grid Failure Impact On The Dynamic Characteristic Of The DFIG 3. The Optimization Control Strategy of the DFIG Grid-Connected 3.1 The DFIG Rotor Flux Control Strategy Design 3.2 Additional Control Strategy Of The Pitch Angle Of The DFIG Grid-Connected 4 .The Grid-Connected DFIG Optimization Control Simulation 5. Conclusions Acknowledgements References
키워드
DFIGGrid-connectedDecentralized structureAdaptiveSliding mode control
저자
Xinyu Liu [ School of electric power North China University of Water Resource and Electric power, Zhengzhou, 450011, China ]
Huili Yang [ School of electric power North China University of Water Resource and Electric power, Zhengzhou, 450011, China ]
Ke Bai [ School of electric power North China University of Water Resource and Electric power, Zhengzhou, 450011, China ]
보안공학연구지원센터(IJCA) [Science & Engineering Research Support Center, Republic of Korea(IJCA)]
설립연도
2006
분야
공학>컴퓨터학
소개
1. 보안공학에 대한 각종 조사 및 연구
2. 보안공학에 대한 응용기술 연구 및 발표
3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최
4. 보안공학 기술의 상호 협조 및 정보교환
5. 보안공학에 관한 표준화 사업 및 규격의 제정
6. 보안공학에 관한 산학연 협동의 증진
7. 국제적 학술 교류 및 기술 협력
8. 보안공학에 관한 논문지 발간
9. 기타 본 회 목적 달성에 필요한 사업
간행물
간행물명
International Journal of Control and Automation
간기
월간
pISSN
2005-4297
수록기간
2008~2016
십진분류
KDC 505DDC 605
이 권호 내 다른 논문 / International Journal of Control and Automation Vol.8 No.8