Earticle

초록

영어

This paper presents the analysis of the steady state error and the time delay of the temperature of the chip sensor in a micro PCR chip and that of the reagent. The chambers with the various heights and sizes are compared in order to examine the differences in temperature and speed. A NTC-thermistor was employed as the chip sensor and the thermocouples were used to examine the temperature of the reagent in the chamber. From the result, we confirmed that the steady state error was negligible for all of constructions and the delay times showed no difference in the range of 60–72°C, while in the other ranges, the speed was higher for the lower height construction.

목차

Abstract
 1. Introduction
 2. Materials and Methods
  2.1. Micro PCR Chip
  2.2. Installation of the Thermocouples
  2.3. Temperature Measurement Experiment
 3. Results
 4. Conclusion
 Acknowledgments
 References

키워드

저자

• Yeong-Hyeon Park [ Department of Convergence Software, Hallym University, Korea Bio-IT Research Center, Hallym University, Korea ]
• Chan-Young Park [ Department of Convergence Software, Hallym University, Korea Bio-IT Research Center, Hallym University, Korea ]
• Yu-Seop Kim [ Department of Convergence Software, Hallym University, Korea Bio-IT Research Center, Hallym University, Korea ]
• Hye-Jeong Song [ Department of Convergence Software, Hallym University, Korea Bio-IT Research Center, Hallym University, Korea ]
• Jong-Dae Kim [ Department of Convergence Software, Hallym University, Korea Bio-IT Research Center, Hallym University, Korea ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Smart Home

• 간기

  격월간

• pISSN

  1975-4094

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605