Earticle

현재 위치 Home

보물 제1312호 무위사 아미타여래삼존좌상 소조층 보수 충전제에 관한 연구
Study About Filling‐Material for Clay Layer Restoration of Seated Amitabha Triad at Muwisa Temple (Treasure No. 1312)

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제31권 제1호 (2015.03)바로가기
  • 페이지
    pp.1-11
  • 저자
    이수예
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A240954

※ 기관로그인 시 무료 이용이 가능합니다.

4,200원

원문정보

초록

영어
Seated Amitabha Triad at Muwisa Temple (Treasure No. 1312) had been known as wooden Buddha statue, but a precise safety inspection revealed that the statue is terracotta Buddha statue made with clay. The clay layer of Amitabha Triad was conserved due to its severe damage. In this study, experiments were conducted to produce the most appropriate filler for the conservation treatment of the seated Amitabha Triad. Mixed clay samples with various ratios were produced and surface hardening state, crack, color change, and shrinkage of the samples during dry process were measured. Loess, fine sand powder, and cotton were used to produce the mixed clay for the filler with six different ratios and then 12 different concentration glues made with glutinous rice glue, Pachymeniopsis Elliptica glue, and animal glue were added as adhesives. Total 72 types of samples were prepared and comparative study was conducted. As a result, when the mixed clay contains 2.5% cotton compared to the weight per cent of loess and fine sand powder and also loess and fine sand in the mixed clay have a 15:1 ratio, the mixed clay had the lowest shrinkage. Animal glue is considered as an appropriate glue since it had small color change, low physical property change and shringkage. Therefore, mixed clay (loess:fine sand=15:1) mixed with 15ml animal glue is likely to be a suitable filler for conservation treatment of the seated amitabha triad at the Muwisa Temple.
한국어
보물 제1312호 무위사 아미타여래삼존좌상은 기존에 목조불로 알려졌으나 2009년에 실시한 정밀안전진단을 통해 본존불인 아미타여래좌상은 흙으로 조성된 소조불로 밝혀졌다. 그런데 아미타여래좌상의 소조층은 손상이 심각 하여 보수가 불가피하였고, 이에 보수재료로서 보다 안전하고 적합한 충전제에 대한 연구를 진행하였다. 본 연구는 무위사 아미타여래좌상의 소조층 보수에 가장 적합한 충전제를 제작하기 위한 실험으로 다양한 비율로 배합한 조합토 샘플을 제작한 후 건조 시 표면의 경화상태, 균열 및 색상변화, 수축률 결과를 측정하였다. 충전제 제작에 사용된 조합토 재료는 황토와 세사, 면 솜을 적용하였으며 6가지의 배합비율로 조합토 시료를 만들고 여기에 찹쌀풀, 도박풀, 아교로 만든 12가지 농도의 접착제를 혼합하여 총72가지 조건의 시료를 제작하여 비교분석 하였다. 실험결과 조합토는 황토와 세사의 질량비에 대하여 2.5%의 면 솜을 함유하고, 황토와 세사의 비율이 15:1일 때 수축률이 가장 낮은 것으로 판명되었 으며, 천연접착제 중 색상의 변화가 적고, 물성변화량과 수축률이 가장 낮은 아교가 사용 가능한 접착제로 판단되었다. 즉, 조합토(황토:세사=15:1)와 아교15ml 첨가 시 가장 낮은 수축률을 나타내어 무위사 아미타여래좌상 보존처리 시 소조층의 충전제로 가장 적합한 것으로 판명되었다.

목차

초록
 ABSTRACT
 1. 서론
 2. 재료 및 방법
  2.1. 아미타여래좌상의 소조토 분석
  2.2. 조합토 제작
  2.3. 조합토 배합비율
  2.4. 천연접착제 제작
  2.5. 충전제 제작
 3. 실험결과
  3.1. 표면상태 변화
  3.2. 색도변화
  3.3 수축변화
 4. 결론
 사사
 REFERENCES

키워드

무위사 소조불 불상보수 충전제 조합토 Muwisa Temple terra-cotta buddha statue buddhist sculpture restoration filler Mixed clay

저자

  • 이수예 [ Su Yea Lee | (사) 사찰문화재보존연구소 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제31권 제1호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장