Earticle

초록

영어

Buckling behavior of cylindrical helical springs subjected to axial load has already been illustrated in the past theories. Unlike cylindrical spring, the behavior of conical compression spring has both linear and nonlinear phase. Very little literature on buckling of conical springs can be found in the past. In this paper, an analytical buckling equation with its experimental verification has been proposed by authors and used it along with the existing theories to locate the phase of compression of conical spring at which buckling occurs. Subsequently, a comparison between cylindrical and conical springs has been made at the point of buckling of cylindrical spring in respect of their load and deflection. This would help to decide the suitability of conical springs against buckling failure of cylindrical springs under the given operating conditions.

목차

Abstract
 1. Introduction
 2. Literature Review
 3. Methodology
  3.1 .Theoretical Analysis for Cylindrical Helical Compression Springs
  3.2 .Numerical Illustration
  3.3. The Outcomes of Theoretical Analysis has been shown in Table 2 as Given Below.
  3.4 Theoretical Analysis for Conical Helical Compression Springs
 4. Conduct of Experiments
  4.1 Test Rig
  4.2 Experimental Data
 5. Results and Discussion
 6. Conclusion
 References

키워드

저자

• Rajkumar V. Patil [ Rajiv Gandhi Institute of Technology,Juhu-Versova,LinkRoad, Andheri(w), Mumbai-400053, India ]
• P. Ravinder Reddy [ Department of Mechanical Engineering, Chaitanya Bharati Institute of Technology, Gandipet, Osman Sagar, Hyderabad-50075, India ]
• P. Laxminarayana [ Department of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad-500007, India ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Advanced Science and Technology

• 간기

  월간

• pISSN

  2005-4238

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605