Earticle

초록

영어

In this study, we have intended to provide the related construction manuals with technical materials and to reduce the defects in the on-site construction, with reviewing the adhesive properties of joint parts according to change of temperature and speed of hot-air sealer for the products that have been made of polyvinyl chloride(PVC) materials in the single waterproof sheet. The result from the experiment is shown as following. 1) Bond strength was shown as high as the welding speed became slower. For the hot-air welding velocity with 3∼6m/min, a stable bond strength has been shown in the range of the hot-air welding temperature with 175∼210℃, while it has been shown in the range of the hot-air welding temperature with 210℃, when the hot-air welding velocity is between 9∼12m/min. 2) If the hot-air welding temperature is lower, the adhesive strength has been shown as higher in the section where the hot-air welding velocity is low, while the adhesive strength has been also shown as higher in the section where the velocity is fast as the hot-air welding temperature becomes higher. The highest bond strength has been shown in the velocity with 3m/min for the hot-air welding temperature with 140±10℃, which is rather low. At 175±10℃, a high bond strength has been shown in the velocity with 3∼6m/min, while the high bond strength has been shown in the velocity with 6∼9m/min at 210±10℃.

목차

Abstract
 1. 서론
  1.1 연구 배경 및 목적
  1.2 연구 범위 및 방법
 2. 이론적 고찰
  2.1 플라스틱 생산 및 재활용 현황
  2.2 방수시트 부착공법
  2.3 방수재료 접합부 검사 기준
 3. 실험계획
  3.1 사용재료
  3.2 실험방법
 4. 실험결과
  4.1 용착온도에 따른 접합특성
  4.2 용착속도에 따른 접합특성
 5. 결론
 참고문헌

키워드

저자

• 고진수 [ Ko, Jin-Soo | 정회원, (주)미람 I.F 대표이사, 공학박사 ]
• 김병윤 [ Kim, Byung-Yun | 정회원, 가톨릭관동대학교 건축학부 조교수, 공학박사 ] 교신저자

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국농촌건축학회논문집 [Journal of the Korean institute of rural architecture]

• 간기

  계간

• pISSN

  1229-2532

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 522 DDC 630