Earticle

초록

영어

The main object of this paper to create controller, which would be work efficiently in the second region II of the operation, also named the partial loading region, of a wind turbine, the wind speed is not high enough to produce the maximum designing power. In a variable speed wind turbine, one of the main objectives of active control is to maximize the power capture in the second region of operation. Power given by a wind turbine based on many variables which will be written out in more detailed at the future. Only the power coefficient, which further bases on tip speed ratio (TSR), is the variable else that can be convolute to maximize the power capture. Since changing the blade pitch from it minimum optimal position will eliminate the lift in the blade thereby reducing the power capture, for this reason the blade pitch is kept constant at the optimal position. The (TSR) is convoluted by controlling the generator torque which ultimately maximizes the power coefficient and then it will be given more power capture.

목차

Abstract
 1. Introduction
 2. Disturbance Tracking Theory
 3. Adaptive Disturbance Racking with Measured Wind Speed
 4. Stability and Convergence
 5. Simulation Results
 6. Summary
 References

키워드

저자

• Ali Oudah [ Faculty of Manufacturing Engineering Pekan, 26600 University Malaysia Pahang ]
• Izzeldin I. Mohd [ Faculty of Electrical & Electronics Engineering Pekan, 26600 University Malaysia Pahang ]
• A.Hameed [ Faculty of Manufacturing Engineering Pekan, 26600 University Malaysia Pahang ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Hybrid Information Technology

• 간기

  격월간

• pISSN

  1738-9968

• 수록기간

  2008~2016

• 십진분류

  KDC 505 DDC 605