Earticle

현재 위치 Home

스트레인 게이지를 利用한 土壤 硬度計의 開發 (I)
Development of a Soil Hardness Meter with Strain Gages
스트레인 게이지를 이용한 토양 경도계의 개발 (I)

첫 페이지 보기
  • 발행기관
    경북대학교 농업생명과학대학 바로가기
  • 간행물
    경북대농학지 바로가기
  • 통권
    Vol. 1 (1983.12)바로가기
  • 페이지
    pp.95-100
  • 저자
    김태한, 이기명, 장익주
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A220868

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
A soil hardness meter with strain gages was developed in order to measure the hardness of the soil. Soil hardness tests were conducted at the laboratory based on this measuring system. Also, these results were compard with that from the cone penetrometer which is widely used for this purpose. The following conclusions were drawn from the results. 1. Since the correlation coefficient of calibration curve obtained from the soil hardness meter with strain gages was 0.99876 and that of calibration curve obtained from the cone penetrometer with dial gage was 0.97150, the soil hardness meter with strain gages was more recomendable than that with dial gage for this purpose. 2. Standard deviations of soil hardness for sands and soil of paddy field when the soil hardness meter with strain gages was used were 6.794 and 8.271, respectively and that of soil hardness for sands and soil of paddy field when the cone penetrometer with dial gage was used were 7.490 and 9.169, respectively. Thus, the soil hardness meter with strain gages seemed to have lower measuring error than with dial gage.
한국어
농기계(農機械)의 포장작업시(圃場作業時) 주행성능(走行性能)에 크게 영향(影響)을 미치는 토양경도(土壤硬度)를 깊이별로 측정(測定)하기 위한 토양경도계(土壤硬度計) 개발(開發)을 목적(目的)으로 스트레인 게이지를 이용(利用)한 토양경도계(土壤硬度計)를 제작(製作)하여 경도(硬度)를 측정(測定)한 실험(實驗)에서 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. Strain gage를 이용(利用)한 토양경도계(土壤硬度計)의 Calibration곡선(曲線)이 상관계수(相關係數)가 0.99876, Dial gage를 이용(利用)한 기존(旣存) 시험기(試驗器)의 Calibration 곡선(曲線)이 상관계수(相關係數)가 0.97150으로 나타나 Strain gage를 이용(利用)하는 쪽이 더욱 정밀(情密)한 측정(測定)이 가능(可能)하였다. 동일(同一) 토양(土壤)에 대(對)한 측정치(測定置)의 표준편차(標準偏差)는 모래, 논흙 2종(種)의 토양(土壤)에 대(對)하여 각각(各各) Strain gage를 이용(利用)한 토양경도계(土壤硬度計)가 6.794, 8.271, Dial gag를 이용(利用)한 기존(旣存) 시험기(試驗器)가 7.490, 9.161로 나타나 Strain gage를 이용(利用)하는 쪽이 측정오차(測定誤差)가 작았다.

저자

  • 김태한 [ Kim, Tae Han | Dept. of Agricultural Engineering, Coll. of Agric., Kyungpook Natl. Univ. ]
  • 이기명 [ Lee, Ki Myung | Dept. of Agricultural Engineering, Coll. of Agric., Kyungpook Natl. Univ. ]
  • 장익주 [ Jang, Ik Joo | Dept. of Agric. Engineering, Graduate School, Coll. of Ag ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    경북대학교 농업생명과학대학
  • 분야
    농수해양>농학

간행물

  • 간행물명
    경북대농학지
  • 간기
    계간
  • pISSN
    2287-271X
  • eISSN
    2288-0356
  • 수록기간
    ~2014
  • 십진분류
    KDC 525 DDC 635

이 권호 내 다른 논문 / 경북대농학지 Vol. 1

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장