Ebrahim Sailan Alabidi, M. R. Kamarudin, T. A. Rahman, Mohsen Khalily, A. Y. Abdulrahman, M. F. Jamlos, M. I. Jais
언어
영어(ENG)
URL
https://www.earticle.net/Article/A217614
※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.
원문정보
초록
영어
The design, simulation and fabrication of a P-shaped monopole antenna for wireless body area networks (WBAN) applications is presented in this paper. It is noted that the radiation characteristics was improved by attaching a P-shaped element to the ground plane. The simulation of the proposed antenna in the free space and close proximity of body surface has been done using CST Microwave Studio. The proposed antenna is designed on the FR4 substrate with dielectric constant of 4.4 and 1.6mm thickness; and the operating frequency band is between 3.1 to 5.1GHz. The final optimized design has dimensions of 32mm ×28mm. The proposed antenna improves the gain of close proximity of body surface. In addition, the antenna improves the reflection coefficient when placed close human body compared to other antennas. It was observed that there is good agreement between the simulation and measurement results, thereby showing that the antenna is potential to be deployed for WBAN application.
목차
Abstract 1. Introduction 2. Antenna Design 3. Parametric Studies for the Proposed P-shaped Monopole Antenna 3.1. Effect of the P-shape of the Ground Plane 3.2. Effect of length (G) on ground plane of the proposed antenna 4. Results and Discussion 4.1. Reflection coefficient of the proposed antenna in the free space and near human body 4.2. The Radiation Patterns of the Proposed Antenna in the Free Space and Near Human Body 4.3. Radiation efficiency of the proposed antenna in the free space and near human body 5. Conclusion Acknowledgements References
키워드
Monopole antennaUltra wide bandWBAN applicationsWireless communication
저자
Ebrahim Sailan Alabidi [ Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia ]
M. R. Kamarudin [ Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia ]
T. A. Rahman [ Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia ]
Mohsen Khalily [ Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia ]
A. Y. Abdulrahman [ Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia ]
M. F. Jamlos [ Advanced Communication Engineering Centre (ACE), School of Computer and Communication Engineering, Universiti Malaysia Perlis, Kampus Pauh Putra, Arau, Perlis 02600, Malaysia ]
M. I. Jais [ Advanced Communication Engineering Centre (ACE), School of Computer and Communication Engineering, Universiti Malaysia Perlis, Kampus Pauh Putra, Arau, Perlis 02600, Malaysia ]
보안공학연구지원센터(IJMUE) [Science & Engineering Research Support Center, Republic of Korea(IJMUE)]
설립연도
2006
분야
공학>컴퓨터학
소개
1. 보안공학에 대한 각종 조사 및 연구
2. 보안공학에 대한 응용기술 연구 및 발표
3. 보안공학에 관한 각종 학술 발표회 및 전시회 개최
4. 보안공학 기술의 상호 협조 및 정보교환
5. 보안공학에 관한 표준화 사업 및 규격의 제정
6. 보안공학에 관한 산학연 협동의 증진
7. 국제적 학술 교류 및 기술 협력
8. 보안공학에 관한 논문지 발간
9. 기타 본 회 목적 달성에 필요한 사업
간행물
간행물명
International Journal of Multimedia and Ubiquitous Engineering
간기
월간
pISSN
1975-0080
수록기간
2008~2016
등재여부
SCOPUS
십진분류
KDC 505DDC 605
이 권호 내 다른 논문 / International Journal of Multimedia and Ubiquitous Engineering Vol.9 No.2