Earticle

현재 위치 Home

토기 복원용 Epoxy Putty 개발 및 물성에 관한 연구
A study on the development and the physical properties of Epoxy Putty for earthenware restoration

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제30권 제1호 (2014.03)바로가기
  • 페이지
    pp.103-109
  • 저자
    배진수, 정다솜, 김우현, 강석인, 위광철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A215469

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
This study aimed to develop materials to compensate for problems of restoration for lost parts and material problems in the conservation treatment. First, there are several problems with existing materials as follows: secondary damage due to the high shrinkage rate and low adhesive strength, sense of difference due to the severe yellowing, remelting due to irreversibility of materials, processability due to the high strength, sag due to the prolonged setting time in the work process and surface contamination of artifacts due to tools or gloves. In order to solve these problems, this study set developmental goals after understanding the types and physical properties based on epoxy resin among the currently used restoration materials of pottery and earthenware. The developed epoxy resin is epoxy putty, which is cured within 5 minutes, for earthenware restoration. In the earthenware restoration method, the epoxy putty enhanced the workability by quickly curing in paste form and compensated disadvantages such as surface contamination. In addition, the use of white micro-balloon for the epoxy stock solution made coloring easier and weight lighter, and a restoration material with low shrinkage and superior processability was developed.
한국어
본 연구는 토·도기 보존 처리과정에 있어서 결손부위를 복원하는 재료의 문제점과 단점 등을 보완한 재료를 개발하고자 하였다. 우선 기존 재료의 문제점으로는 높은 수축률과 낮은 접착력으로 인한 2 차 파손의 문제, 심한 황변 현상으로 인한 이질감의 문제, 재료의 비가역성으로 인한 재용해의 문제 및 높은 강도로 인한 가공성의 문제, 작업 과정 중 긴 경화 시간으로 인한 처짐 현상 및 도구나 장갑에 묻어 유물의 표면을 오염시키는 문제 등이 있다. 이러한 문제점을 해결하기 위해 현재 사용되고 있는 토·도기 복원 재료들 중 Epoxy 수지를 중심으로 종류 및 물성을 파악한 후 개발 목표를 설정하였다. 개발 된 Epoxy는 5 분 내외에 경화가 이루어지는 토기 복원용 Epoxy Putty이다. 토기 복원 방법에 있어서 Epoxy Putty의 경우 페이스트(Paste) 형태로 빠르게 경화되어 작업의 편리성을 높였으며, 표면 오염 등의 단점을 보완하 였다. 또한 Epoxy 원액에 백색의 Micro-balloon을 사용함으로 인해 Coloring에 용이하고 경량화하도록 하였으며, 저수 축 및 가공성이 우수한 복원 재료를 개발하였다.

목차

초록
 ABSTRACT
 1. 서론
 2. 재료 및 실험 방법
  2.1. 실험재료
  2.2. 실험 방법
 3. 결과 및 고찰
 4. 결론
 사사
 REFERENCES

키워드

토ㆍ도기 복원 재료 에폭시 퍼티 수축력 가공성 pottery and earthenware restoration material epoxy putty shrinkage strength processability

저자

  • 배진수 [ Jin Soo Bae | (재)중앙문화재연구원 ]
  • 정다솜 [ Da Som Cheong | 한서대학교 문화재보존과학연구센터 ]
  • 김우현 [ Woo Hyun Kim | (재)중앙문화재연구원 ]
  • 강석인 [ Seok In Kang | 한서대학교 문화재보존과학연구센터 ]
  • 위광철 [ Koang Chul Wi | 한서대학교 문화재보존과학연구센터 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제30권 제1호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장