Earticle

초록

영어

The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms, the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand to enter with inside of the press die, therefore, basic countermeasure is the safety press. In order to prevent access to mechanical moving part by the hand or any part of the body , it is important to making a safety die design Structurally. It presents the design of the safety press die with suitable structure in the Product's attribute which it had shown in samples, There is a possibility of being difficult because the attribute of safety die design that had present all the productions from research does not agree each other. but because the representative process which is used most at sample had designed, If you were imitates with safety die design base which is presented from this research, It comes to be thought to be the part which can are used at the various sides.

목차

Abstract
 1. 서론
 2. 선행연구
  2.1 프레스 종류 및 작업 형태별 재해 현황
  2.2 가공공정 및 행동별 재해 현황
  2.3 선행연구 분석 결과
 3. 안전을 고려한 금형모델 연구
  3.1 표본 제품도 분석
  3.2 블랭킹, 수동 전단 공정의 안전금형 설계
  3.3 밴딩 공정의 안전금형 설계
  3.4 피어싱 공정의 안전 금형 설계
 4. 안전금형 모델 분석 결과
  4.1 블랭킹, 수동 전단 공정의 안전 분석
  4.2 밴딩공정의 안전 분석
  4.3 피어싱공정의 안전 분석
 5. 결론
 6. 참고문헌

키워드

저자

• 이춘규 [ Chun-Kyu Lee | 공주대학교 기계공학부 ] Corresponding author
• 남승돈 [ Seung-Done Nam | 유한대학교 금형설계과 ]
• 김영춘 [ Young-Choon Kim | 공주대학교 기계공학부 ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  대한안전경영과학회지 [Journal of Korea Safety Management & Science]

• 간기

  계간

• pISSN

  1229-6783

• eISSN

  2288-1484

• 수록기간

  1999~2025

• 십진분류

  KDC 530 DDC 620