Earticle

현재 위치 Home

3D 측정치를 활용한 30대 여성 체간부 체형 분류
Upper Body Type Classifications of Women in Their 30s Based on 3D Measurements

첫 페이지 보기
  • 발행기관
    한국디자인트렌드학회 바로가기
  • 간행물
    한국디자인포럼 KCI 등재 바로가기
  • 통권
    Vol. 38 (2013.02)바로가기
  • 페이지
    pp.143-156
  • 저자
    김지민, 김효숙
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A195662

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
The purpose of this study is to establish initial data for developing a well-fitted pattern by categorizing and analyzing body types based on 3D body scanning data of women in their 30s. The results are as follows: First, according to analysis and comparison of 3D measurements from the 5th (2004) and 6th (2010) Human body measurement investigation conducted by Size Korea, the vertical lengths taken in 2010, which indicate the height measurements of body, was much higher than that of in 2004, and the values related to body volume and degree of obesity such as width, thickness and circumference showed lower values in 2010, compared to the measurements taken in 2004. Second, analysis by age group based on 3D measurements from the 6th investigation presented that women in their early 30s have the highest values in height and length measurements, and their width, thickness and circumference measurements continue to increase as they get closer to their late 30s. Third, according to the results of the factor analysis, there are five body factors: Factor 1, the 'body volume and horizontal measurement'; Factor 2, the 'vertical torso length'; Factor 3, the 'size of shoulder'; Factor 4, the 'upper body length'; Factor 5, the 'hip length'. Fourth, the results of the cluster analysis showed that there are three distinctive body types. The largest number of the study subjects was related to Type 2 (43.20%), followed by Type 1 (25.84%) and Type 3 (20.80%), respectively. For distribution of age groups by body type, Type 1 was most common among the early 30s and Type 2 was evenly distributed across all 30s, while Type 3 appeared most frequently among the late 30s. Therefore, body measurements should be divided into early, middle and late 30s in accordance with changes in their bodies and reflected in making patterns.
한국어
본 연구에서는 30대 여성의 3D 인체스캔데이터를 바탕으로 체형을 분류하고 분석하여 신체적합성이 높은 패턴개발을 위한 기초자료를 제공하는데 있다. 연구결과는 다음과 같다. 첫째, 기술표준원 Size Korea의 제5차(2004년)와 제6차(2010년) 한국인 인체치수조사의 3D 측정치를 비교분석한 결과, 신체의 수직길이에 해당하는 높이항목이 2004년에 비해 2010년도에 크게 나타나고 너비·두께·둘레 등 신체의 부피와 비만화에 해당하는 항목은 2004년에 비해 2010년에 작게 나타났다. 둘째, 제6차 한국인 인체치수조사(2010년)의 3D 측정치를 바탕으로 연령집단별로 분석한 결과 높이·길이 항목에서 30대 초반 집단이 가장 큰 값을 나타내었고, 너비·두께·둘레항목에서는 30대 후반으로 갈수록 큰 값을 보였다. 셋째, 요인분석 결과 총 5개의 요인으로 나타났다. 요인1은 ‘신체부피 및 수평크기를 나타내는 요인’, 요인2는 ‘체간부의 수직크기를 나타내는 요인’, 요인3은 ‘어깨크기를 나타내는 요인’, 요인4는 ‘몸통 길이를 나타내는 요인’, 요인5는 ‘엉덩이길이를 나타내는 요인’으로 분석되었다. 넷째, 군집분석 결과 총 3개의 유형으로 분류되었으며 유형별 인원분포는 유형2(43.20%), 유형1(25.84%), 유형3(20.80%)의 순으로 나타났다. 연령집단별 분포에서는 유형1은 30대 초반 집단에서 유형2는 30대 전 연령층에서 비교적 고른 분포를 보이며 30대 중반 집단에서 가장 높은 빈도를 보였다. 유형3은 30대 후반 집단에서 높은 분포를 나타내었다. 이에 30대 여성은 연령집단별 신체변화에 따른 세분화된 치수체계가 필요하고 패턴제작시 반영이 요구된다.

목차

논문요약
 Abstract
 1. 서론
 2. 연구방법 및 절차
  2.1. 연구대상
  2.2. 분석항목
  2.3. 분석방법
 3. 연구결과 및 고찰
  3.1. 제5차(2004년), 6차(2010년) 3D 측정치 비교분석
  3.2. 제6차(2010년) 3D 측정치의 기술통계 분석
  3.3. 체간부 체형의 구성요인 추출
  3.4. 30대 여성 체간부 체형의 유형화
 4. 결론
 참고문헌

키워드

30대 여성 체간부 체형 3D 측정치 Women in their 30s 3D measurements

저자

  • 김지민 [ Kim, Ji Min | 건국대학교 일반대학원 의류학과 박사과정 ] 주저자
  • 김효숙 [ Kim, Hyo Sook | 건국대학교 의상디자인전공 교수 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국디자인트렌드학회 [Society of korea Design Trend]
  • 설립연도
    1996
  • 분야
    예술체육>디자인
  • 소개
    학술영역의 확대 발전에 따른 다학제적 융복합 학술연구를 통한 시대적 소명을 다함이 21세기 학회 활동의 주요한 키이워드가 되고 있다. 이에 본 학회는 21세기가 요구하는 국내외 디자인 전 분야에 관한 국제교류, 학술 연구활동, 창작활동, 대정부 정책 건의 등의 시대적 소명을 다하고 대한민국 대표 디자인학회로의 재 도약을 위해 가일층 노력하는 학술단체가 되고자 설립되었다.

간행물

  • 간행물명
    한국디자인포럼 [Design Forum]
  • 간기
    계간
  • pISSN
    2233-9205
  • 수록기간
    1996~2017
  • 십진분류
    KDC 658 DDC 740

이 권호 내 다른 논문 / 한국디자인포럼 Vol. 38

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장